Introduction
This manual provides comprehensive instructions for the safe assembly, operation, and maintenance of your Baby Trend Tango Stroller Travel System and Ally Infant Car Seat. Please read all instructions carefully before use and retain this manual for future reference. Proper use ensures the safety and comfort of your child.
Image: The Baby Trend Tango Stroller and Ally Infant Car Seat, both in Veridian color, shown together as a complete travel system.
Safety Information
Always prioritize your child's safety. Failure to follow these warnings and instructions could result in serious injury or death.
- Read All Instructions: Before assembling or using the product, read all instructions in this manual.
- Never Leave Child Unattended: Always keep your child in view when using the stroller or car seat.
- Harness Use: Always secure your child with the 5-point safety harness in both the car seat and stroller. Ensure straps are snug and properly adjusted.
- Weight Limits: Do not exceed the maximum weight recommendations for the stroller (50 lbs) or car seat (35 lbs).
- Brakes: Always engage the parking brake when the stroller is stationary.
- Avoid Hazards: Do not hang bags on the handle, as this can cause the stroller to tip. Avoid placing hot liquids near your child.
- Car Seat Installation: Ensure the car seat is correctly installed in your vehicle using either the LATCH system or vehicle seat belt, following the car seat manual and your vehicle's owner's manual.
- Stroller Compatibility: Only use Baby Trend Ally Infant Car Seats with the Tango Stroller.
Setup and Assembly
Stroller Assembly
- Unfold the Stroller: Release the storage latch and lift the handle until the frame locks into place.
- Attach Wheels: Insert the front and rear wheels into their designated slots until they click securely.
- Attach Parent Console: Snap the parent console onto the stroller handle.
Ally Infant Car Seat Base Installation
Refer to the separate Ally Infant Car Seat instruction manual for detailed vehicle installation instructions. Ensure the base is securely installed using either the LATCH system or the vehicle's seat belt, and that the recline indicator is within the acceptable range.
Image: The Ally Infant Car Seat base, showing the recline adjustment handle and LATCH connectors.
Attaching Infant Car Seat to Stroller
- Ensure the stroller is fully open and locked.
- Place the Ally Infant Car Seat onto the stroller's child tray, aligning the car seat with the stroller's attachment points.
- Press down firmly until you hear an audible click, indicating the car seat is securely latched to the stroller.
- Always check that the car seat is firmly attached by lifting it slightly before placing your child inside.
Image: The Baby Trend Tango Stroller with the Ally Infant Car Seat securely attached, forming a travel system.
Operating Instructions
Folding the Stroller
The Tango Stroller features a super-fast one-hand fold mechanism.
- Ensure the child is removed from the stroller.
- Locate the one-hand fold strap/handle, typically in the seat area.
- Pull the strap/handle upwards firmly. The stroller will begin to fold compactly.
- Secure the storage latch to keep the stroller in its folded position. The stroller is designed to stand independently when folded.
Image: The Baby Trend Tango Stroller shown in its compact, upright folded position, highlighting its space-saving design.
Adjusting the 5-Point Safety Harness
Proper harness adjustment is crucial for your child's safety.
- Place your child in the seat.
- Connect the shoulder straps to the buckle.
- Pull the harness adjustment strap, usually located between the child's legs, to tighten the harness until it is snug against your child's body. You should not be able to pinch any slack in the webbing at your child's shoulder.
- To loosen, press the release button on the buckle and pull the shoulder straps outwards.
Image: A hand demonstrating how to adjust the 5-point safety harness on the stroller seat for a secure fit.
Canopy and Storage Basket
- Canopy: The oversized canopy with UPF 50+ protection can be adjusted forward or backward to shield your child from sun and elements.
- Storage Basket: Utilize the large storage basket located under the seat for essentials. It offers both front and rear access.
Parent Console
The parent console features a cell phone positioner and two extra-deep flex-grip cup holders for your convenience.
Maintenance
- Cleaning: Spot clean or wipe clean fabric components with a mild soap and damp cloth. Do not use bleach.
- Frame Cleaning: Wipe the metal and plastic frame parts with a soft, damp cloth.
- Wheel Maintenance: Periodically check wheels for debris and ensure they rotate freely.
- Storage: Store the travel system in a dry, cool place away from direct sunlight to prevent fabric fading and material degradation.
- Inspections: Regularly inspect all parts for wear, loose fasteners, or damaged components. Discontinue use if any part is damaged.
Troubleshooting
- Stroller Not Folding: Ensure the seat is in an upright position and the child is removed. Check for any obstructions in the folding mechanism.
- Wheels Not Turning Smoothly: Check for debris (e.g., hair, lint) wrapped around the wheel axles. Clean as necessary. Lubricate with a silicone-based spray if needed.
- Car Seat Not Latching to Stroller: Verify that the car seat is correctly aligned with the stroller's attachment points. Apply firm, even pressure until a click is heard. Ensure no fabric is obstructing the latch.
- Harness Difficult to Adjust: Check for twists in the harness straps. Ensure the adjustment mechanism is free of debris.
Specifications
Image: A visual representation of the dimensions and weight capacities for both the Tango Stroller and Ally Infant Car Seat.
| Feature | Detail |
|---|---|
| Brand | Baby Trend |
| Model Number | TS04C70B |
| Color | Veridian |
| Stroller Dimensions (L x W x H) | 38.25" x 22.5" x 43" |
| Folded Size | 31" x 23" x 17" |
| Stroller Weight | 32.6 Pounds |
| Stroller Maximum Weight Recommendation | 50 Pounds |
| Infant Car Seat Minimum Weight | 4 Pounds |
| Infant Car Seat Maximum Weight | 35 Pounds |
| Harness Type | 5 Point |
| Number of Wheels | 4 |
| Material | Polyester, Ethylene Vinyl Acetate, Metal, Plastic |
| Included Components | Stroller, Rear-Facing Infant Car Seat, Car Seat Base, Stroller Cover/Canopy |
Warranty Information
This Baby Trend Tango Stroller Travel System is covered by a 1 Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, abuse, accident, alteration, or improper assembly. Please retain your proof of purchase for warranty claims.
Customer Support
For further assistance, replacement parts, or to make a warranty claim, please contact Baby Trend Customer Service:
- Website: www.babytrend.com
- Phone: Refer to the Baby Trend website for current contact numbers.
- Email: Refer to the Baby Trend website for customer support email.
When contacting support, please have your product model number (TS04C70B) and date of purchase readily available.
