1. Safety Information
Read this entire manual carefully before installing, operating, or performing maintenance on the Eldom SV05044 electric water heater. Failure to follow these instructions may result in property damage, personal injury, or death.
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply matches the appliance's requirements (230V, 1.5kW).
- Plumbing Safety: Installation must be performed by a qualified plumber. Ensure proper water pressure and connections to prevent leaks. A pressure relief valve must be installed.
- Water Temperature: Hot water can cause severe burns. Exercise caution when setting and using hot water.
- Children and Vulnerable Persons: This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
- Maintenance: Disconnect power before performing any maintenance or cleaning.
2. Product Overview
The Eldom SV05044 is a 50-liter electric water heater designed for efficient hot water supply in small to medium-sized households. It features a durable construction and user-friendly controls.
Key Features:
- Capacity: 50 Liters
- Power: 1.5 kW (1500W)
- Control: Mechanical thermostat with illuminated on/off switch
- System: Unvented mains pressure system for consistent hot water
- Insulation: Thick thermal insulation (33 mm eco-friendly HFO foam) for reduced heat loss
- Tank: Durable enameled steel tank with zirconium-enriched enamel and magnesium anode for corrosion protection
- Safety: Integrated safety valve
- Energy Efficiency: Class C
Product Components:
3. Installation
The Eldom SV05044 water heater is designed for indoor installation. It can be installed vertically. Proper installation is crucial for safe and efficient operation. Always ensure installation is carried out by qualified professionals.
3.1 Mounting
- Select a suitable location on a load-bearing wall, ensuring sufficient space for maintenance and connections.
- Mark the drilling points for the mounting brackets.
- Drill holes and securely fasten the mounting brackets to the wall using appropriate hardware.
- Carefully lift and hang the water heater onto the installed brackets. Ensure it is level and securely seated.
3.2 Plumbing Connections
- Connect the cold water supply to the inlet pipe (typically marked blue).
- Connect the hot water outlet to the hot water distribution system (typically marked red).
- Install a pressure relief valve on the cold water inlet line, as specified by local regulations.
- Ensure all connections are watertight.
- Fill the tank with water before connecting to the electrical supply. Open a hot water tap to allow air to escape until water flows freely.
3.3 Electrical Connection
- Ensure the main power supply is switched off before making any electrical connections.
- Connect the water heater to a dedicated 230V, 1.5kW electrical circuit.
- The appliance must be properly grounded.
- Verify all electrical connections are secure and comply with local electrical codes.
4. Operation
Once installed and filled with water, the Eldom SV05044 is ready for operation.
4.1 Initial Startup
- Ensure the water heater tank is completely filled with water (refer to Plumbing Connections).
- Switch on the main power supply to the water heater.
- Press the On/Off button on the control panel to activate the unit. The indicator light will illuminate.
4.2 Temperature Adjustment
- Use the temperature adjustment controls on the front panel to select your desired water temperature. Available settings typically include 55°C, 65°C, and 75°C.
- The mechanical thermostat will maintain the selected temperature.
- For energy efficiency, consider setting the temperature to the lowest comfortable level.
4.3 Smart Mode (if applicable)
If your model includes a 'Smart' function, activating it allows the water heater to learn your usage patterns and optimize heating cycles for energy savings. Refer to the control panel for specific Smart mode activation instructions.
5. Maintenance
Regular maintenance ensures the longevity and efficient operation of your water heater. Always disconnect the power supply before performing any maintenance.
5.1 Annual Inspection
- Have a qualified technician inspect the water heater annually.
- Check the pressure relief valve for proper operation.
- Inspect all plumbing and electrical connections for signs of wear or leaks.
5.2 Descaling
Depending on water hardness, mineral deposits (scale) can accumulate inside the tank and on the heating element, reducing efficiency. Descaling should be performed periodically by a qualified technician.
5.3 Cleaning
- Clean the exterior of the water heater with a soft, damp cloth.
- Do not use abrasive cleaners or solvents.
6. Troubleshooting
Before contacting customer support, review the following common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No hot water | No power supply Thermostat set too low Heating element failure | Check circuit breaker/fuse Adjust thermostat setting Contact qualified technician |
| Insufficient hot water | Thermostat set too low Excessive hot water usage Scale buildup | Increase thermostat setting Reduce hot water demand Contact qualified technician for descaling |
| Water leaking | Loose plumbing connections Pressure relief valve discharge Tank corrosion | Tighten connections Normal operation if pressure is too high; check system pressure Contact qualified technician |
| Unusual noises | Sediment buildup in tank Loose components | Contact qualified technician for flushing/descaling Contact qualified technician |
7. Specifications
| Feature | Detail |
|---|---|
| Model | SV05044 |
| Brand | Eldom |
| Capacity | 50 Liters |
| Power (Wattage) | 1.5 kW (1500W) |
| Voltage | 230 V |
| Annual Energy Consumption | 1381 kWh |
| Dimensions (H x D x W) | 59.5 cm x 43.5 cm x 45.7 cm |
| Weight | 17 kg |
| Material | Alloy Steel (Enameled) |
| Max Pressure | 7 Bar |
| Installation Style | Indoor Installation |
| Included Components | Pressure vessel, 3-way inlet valve |
| Energy Efficiency Class | C |
8. Warranty and Support
Eldom products are manufactured to high-quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Eldom website.
For technical assistance, spare parts, or service inquiries, please contact Eldom customer support or your authorized dealer. When contacting support, please have your product model (SV05044) and serial number available.
