Panadero EMERALD Wood-Burning Stove 7.1 kW User Manual

1. Introduction

Thank you for choosing the Panadero EMERALD Wood-Burning Stove. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new stove. Please read these instructions carefully before using the appliance and keep them for future reference. Proper use and maintenance will ensure optimal performance and longevity of your stove.

2. Safety Information

WARNING: Failure to follow these safety instructions can result in property damage, bodily injury, or even death. Always consult local building codes and fire regulations before installation.

• Installation: The stove must be installed by a qualified professional in accordance with all local and national building and fire safety regulations. Ensure adequate clearance to combustible materials.
• Fuel: Only use dry, seasoned wood as fuel. Do not burn treated wood, plastics, garbage, or flammable liquids, as this can cause dangerous fumes, creosote buildup, and damage to the stove.
• Ventilation: Ensure proper ventilation in the room where the stove is installed. A carbon monoxide detector is highly recommended.
• Hot Surfaces: The stove surfaces become extremely hot during operation. Keep children, pets, and combustible materials away from the stove. Use heat-resistant gloves when operating.
• Chimney: Regularly inspect and clean your chimney to prevent creosote buildup and chimney fires.
• Ash Disposal: Dispose of ashes in a metal container with a tight-fitting lid, placed on a non-combustible surface, away from combustible materials.

3. Product Overview

The Panadero EMERALD Wood-Burning Stove is an Ecodesign compliant heating appliance designed for efficient and clean wood combustion. It features a robust double sheet steel body (4+3 mm) and a durable cast iron grate. The stove is equipped with a 750 °C resistant ceramic glass for a clear view of the flames and a clean glass system to help maintain visibility.

Key Features:

• Nominal Power: 7.1 kW
• Efficiency: 80.7%
• Heating Volume: Up to 220 m³
• Fuel Type: Wood logs up to 50 cm
• Combustion System: Triple combustion
• Smoke Outlet: Vertical, 150-153 mm diameter
• Color: Metallic Black

Figure 1: Front view of the Panadero EMERALD Wood-Burning Stove. This image shows the metallic black finish, the large ceramic glass door, and the overall compact design suitable for various living spaces.

4. Setup and Installation

4.1 Unpacking

Carefully remove the stove from its packaging. Inspect for any damage that may have occurred during transit. Report any damage to your supplier immediately. Retain packaging materials for potential future transport or returns.

4.2 Placement

Position the stove on a non-combustible floor protector if required by local regulations. Ensure sufficient clearance from combustible walls, furniture, and other materials as specified by the manufacturer's installation manual (not provided here, but crucial for actual installation). The stove's dimensions are 56 x 39 x 81 cm (L x W x H).

4.3 Chimney Connection

The Panadero EMERALD stove features a vertical smoke outlet with a diameter of 150-153 mm. Connect the stove to a suitable, properly sized, and maintained chimney system. All connections must be sealed to prevent smoke leakage. Ensure the chimney is clean and free of obstructions before connecting the stove.

5. Operating Instructions

5.1 Fuel

Use only dry, seasoned hardwood logs. Logs should be cut to a maximum length of 50 cm to fit comfortably within the firebox. Avoid using wet wood, as it produces less heat, more smoke, and contributes to creosote buildup.

5.2 Lighting the Stove

• Open all air controls fully.
• Place crumpled paper or natural firelighters on the cast iron grate.
• Stack small pieces of kindling wood on top of the firelighters.
• Light the firelighters.
• Once the kindling is burning well, gradually add larger pieces of wood.
• Close the stove door, ensuring it is securely latched.

5.3 Air Control and Triple Combustion

The EMERALD stove features a triple combustion system for enhanced efficiency. Adjust the primary and secondary air controls to regulate the burn rate and heat output. For initial lighting and adding new fuel, open the air controls fully. Once the fire is established, you can reduce the air intake to achieve a slower, more efficient burn. The clean glass system utilizes an air wash to keep the ceramic glass clear during operation.

5.4 Refueling

When adding new fuel, open the air controls fully for a few minutes before opening the stove door to prevent smoke spillage. Carefully open the door, add new logs, and then close the door securely. Once the new fuel has ignited, you can readjust the air controls.

6. Maintenance

Regular maintenance is crucial for the safe and efficient operation of your wood-burning stove.

6.1 Ash Removal

Remove ashes regularly, typically when the ash bed is 2-3 cm deep. Use a metal shovel and place ashes in a metal container with a tight-fitting lid. Ensure the container is placed on a non-combustible surface away from any flammable materials, as ashes can retain heat for several days.

6.2 Glass Cleaning

The ceramic glass can be cleaned when the stove is completely cool. Use a specialized stove glass cleaner or a damp cloth dipped in fine ash to gently scrub away soot. Avoid abrasive cleaners or sharp objects that could scratch the glass.

6.3 Chimney Cleaning

Have your chimney inspected and cleaned by a certified chimney sweep at least once a year, or more frequently if you burn continuously. This prevents creosote buildup, which is a major cause of chimney fires.

6.4 General Inspection

Periodically check the door seals, hinges, and air controls for wear and tear. Replace any worn parts to maintain airtightness and efficiency.

7. Troubleshooting

This section addresses common issues you might encounter with your wood-burning stove.

• Problem: Smoke entering the room.
  Possible Causes: Blocked chimney, insufficient draft, door opened too quickly, wet wood, negative pressure in the room.
  Solution: Check chimney for obstructions, ensure air controls are open, open door slowly, use dry wood, check room ventilation.
• Problem: Fire not burning efficiently or going out.
  Possible Causes: Insufficient air supply, wet wood, too much ash in the firebox, chimney blockage.
  Solution: Open air controls, use dry wood, remove excess ash, check chimney.
• Problem: Glass becoming excessively dirty.
  Possible Causes: Burning wet wood, insufficient air wash, low burning temperature.
  Solution: Use dry wood, ensure air wash is functioning (air controls open enough), maintain a hot fire.

8. Specifications

9. Warranty and Support

For information regarding warranty coverage, spare parts availability, or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.