Feit Electric CFC60/950CA/FIL/6
Feit Electric CA10 LED Light Bulb User Manual
Model: CFC60/950CA/FIL/6
Introduction
Thank you for choosing Feit Electric CA10 LED Light Bulbs. This 6-pack of dimmable, 60-watt equivalent LED candelabra bulbs is designed to provide vibrant, natural light while offering significant energy savings. These bulbs feature a classic chandelier flame tip design with an E12 base, making them suitable for various fixtures such as chandeliers, lanterns, and wall sconces. They provide instant-on full brightness and are built for long-lasting performance.
Safety Information
Please read and understand all safety instructions before installing or using these light bulbs. Failure to do so may result in electric shock, fire, or other injuries.
- Always turn off the power supply at the switch and the main circuit breaker before installation, removal, or inspection.
- Do not use with standard dimmers unless specified as dimmable. These bulbs are dimmable.
- Do not use in totally enclosed fixtures as this may shorten bulb life.
- Do not touch the bulb when it is operating or immediately after turning it off, as it may be hot.
- Ensure the bulb is securely screwed into the socket.
- This product is for indoor and outdoor use, suitable for damp locations.
- Do not disassemble or modify the bulb.
- Keep out of reach of children.
Setup and Installation
These Feit Electric LED bulbs are designed for easy installation into standard E12 candelabra sockets.
- Ensure the power to the fixture is turned OFF at the circuit breaker before beginning installation.
- Allow the old bulb to cool completely before removing it.
- Carefully unscrew the old bulb from the socket.
- Gently screw the Feit Electric CA10 LED bulb into the E12 candelabra socket until it is snug. Do not overtighten.
- Restore power to the fixture at the circuit breaker.
- Turn on the light switch to verify proper operation.
Figure 1: Feit Electric CA10 LED Light Bulbs (6-pack).
Figure 2: Example of a Feit Electric CA10 LED bulb installed in a wall sconce.
Operating Instructions
These LED bulbs are designed for simple operation and offer dimmable functionality.
- Standard Operation: Simply turn on the light switch connected to the fixture. The bulbs will illuminate instantly to full brightness.
- Dimmable Functionality: If your fixture is connected to a compatible dimmer switch, you can adjust the brightness of the bulbs. Ensure your dimmer switch is designed for LED compatibility for optimal performance and to prevent flickering.
Figure 3: Feit Electric CA10 LED bulbs illuminating a chandelier.
Maintenance
Feit Electric LED bulbs require minimal maintenance due to their long lifespan.
- Cleaning: Before cleaning, ensure the power is off and the bulb has cooled. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
- Replacement: These bulbs have an average life of 15,000 hours (approximately 13 years based on 3 hours/day). When replacement is needed, follow the installation steps in the "Setup and Installation" section.
Troubleshooting
If you experience issues with your Feit Electric LED bulbs, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture; Bulb not screwed in properly; Faulty bulb. | Check circuit breaker and wall switch. Ensure bulb is securely tightened. Test bulb in another working fixture. |
| Bulb flickers or dims unexpectedly. | Incompatible dimmer switch; Loose connection; Voltage fluctuations. | Ensure dimmer is LED compatible. Tighten bulb. Consult an electrician if voltage issues persist. |
| Light output is too low or too high. | Dimmer setting; Incorrect bulb for fixture. | Adjust dimmer setting. Verify bulb wattage equivalent matches fixture requirements. |
Specifications
Detailed technical specifications for the Feit Electric CA10 LED Light Bulb:
| Attribute | Value |
|---|---|
| Brand | Feit Electric |
| Model Number | CFC60/950CA/FIL/6 |
| Light Type | LED |
| Wattage (Actual) | 5.5 Watts |
| Wattage (Equivalent) | 60 Watts |
| Brightness | 500 Lumens |
| Color Temperature | 5000K Daylight |
| Bulb Shape Size | CA10 (Candle Flame Tip) |
| Bulb Base | E12 (Candelabra) |
| Dimmable | Yes |
| Average Life | 15,000 Hours / 13 Years |
| Voltage | 120 Volts |
| Color Rendering Index (CRI) | 90 |
| Material | Glass |
| Mercury Free | 100% Mercury Free |
| Certifications | UL Listed, CEC Title 20 Compliant, FCC Compliant |
| Indoor/Outdoor Usage | Outdoor (suitable for damp locations) |
| Product Dimensions | 1.4"W x 3.9"H |
| Item Weight | 4.64 ounces (per 6-pack) |
| UPC | 017801213140 |
Warranty and Support
Feit Electric products are manufactured to the highest quality standards. These LED bulbs are rated for an average life of 15,000 hours, providing years of reliable illumination.
For 24/7 customer support or additional information, please visit the official Feit Electric support page:
Figure 4: Feit Electric Customer Support Information.
Additional Product Information
Figure 5: Product packaging highlighting key features and energy savings.
Figure 6: Feit Electric CA10 LED bulbs used in outdoor lighting fixtures.
Figure 7: The "Enhance Vivid Natural Light" feature in various settings.
Related documentsCFC60/950CA/FIL/6
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.