Serta Motion Essentials Power Cord Kit Instruction Manual

1. Introduction

This manual provides essential instructions for the installation and operation of your Serta Motion Essentials Power Cord Kit. This kit is designed as a replacement power solution for various Serta adjustable bed bases, including Motion Essentials (3rd, 4th Gen), Motion Perfect (2.0, II, III, IV), Motion Custom (I, II), Motion Plus, Ease, and Ergo models. Please read this manual thoroughly before proceeding with installation or use.

2. Product Overview

The Serta Motion Essentials Power Cord Kit is a 3-piece replacement set that includes the necessary components to power your compatible adjustable bed base. It consists of a power input cord, an AC adapter box, and a plug. This kit is specifically designed to restore power functionality to your adjustable bed base if the original power components are damaged or lost.

Note: This kit does not include a remote control. Ensure you have a compatible remote control for your bed base to operate its functions.

3. Compatibility

This power cord kit is compatible with the following Serta adjustable bed bases:

• Serta Motion Essentials (3rd Gen, 4th Gen)
• Serta Motion Perfect (2.0, II, III, IV)
• Serta Motion Custom (I, II)
• Serta Motion Plus
• Serta Ease
• Serta Ergo

Important: This kit is not compatible with Serta Motion Essentials 1st Gen, 2nd Gen, Motion Perfect 1.0, or Motion Slim Bases. To ensure compatibility, please match your existing remote control with the images provided below. The appearance of your remote can help identify your bed base generation.

Typical remote for compatible Motion Essentials models.

Example of older Serta Ease remotes (left) and a newer compatible replacement (right).

Another example of older Serta Ease remotes (left) and a newer black compatible replacement (right).

4. Package Contents

Your Serta Motion Essentials Power Cord Kit includes the following components:

• 1 x AC Adapter Box (29V 2A 58W)
• 1 x Power Input Cord (connects AC adapter to wall outlet)
• 1 x Output Cord (connects AC adapter to bed base motor)

The complete 3-piece power cord replacement set.

5. Safety Information

• Always unplug the bed base from the power outlet before performing any maintenance or installation.
• Do not use the power cord kit if any part is damaged (frayed wires, cracked casing, etc.). Contact customer support for a replacement.
• Ensure the power cord is not pinched or routed in a way that could cause damage or tripping hazards.
• This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.
• Keep children and pets away from the power components during installation and operation.

6. Setup and Installation

Follow these steps to install your new power cord kit:

1. Unplug Existing Power: If replacing an old power cord, ensure the bed base is completely unplugged from the wall outlet.
2. Locate Motor Connection: Identify the power input port on your bed base motor. This is typically located underneath the bed frame.
3. Connect Output Cord: Connect the output cord (the one with the specialized connector) from the new AC adapter box to the power input port on the bed base motor. Ensure a secure connection.
4. Connect Power Input Cord: Connect the power input cord (the one with the standard wall plug) to the AC adapter box.
5. Plug into Wall Outlet: Plug the power input cord into a grounded electrical wall outlet.
6. Test Functionality: Use your remote control to test the bed base's functions (head up/down, foot up/down, flat, zero G).

7. Operating Instructions

Once the power cord kit is installed and the bed base is powered, you can operate your adjustable bed using its remote control. The specific buttons and functions may vary slightly by remote model, but common functions include:

• HEAD UP/DOWN: Adjusts the head section of the bed upwards or downwards.
• FOOT UP/DOWN: Adjusts the foot section of the bed upwards or downwards.
• FLAT: Returns the bed to a completely flat position.
• ZERO G: Activates the 'Zero Gravity' preset position, which elevates the head and feet to a position that may relieve pressure on the back.

Example of a Serta Motion Essentials remote control.

8. Troubleshooting

If your adjustable bed base is not functioning correctly after installing the power cord kit, consider the following troubleshooting steps:

• No Power: Ensure all power cords are securely connected to the AC adapter box, the bed motor, and the wall outlet. Check if the wall outlet is functional by plugging in another device.
• Remote Not Responding: Verify that your remote control has working batteries. If the remote is new or has had its batteries replaced, it may need to be paired with the bed base. Refer to your bed base's original remote control manual for pairing instructions.
• Partial Functionality: If only certain parts of the bed move, check the connections to the individual motors (if applicable) and ensure no cables are pinched or damaged.
• Unusual Noises: If you hear grinding or unusual noises, immediately discontinue use and unplug the bed. Contact customer support.

If these steps do not resolve the issue, please contact Serta customer support or a qualified technician.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your original Serta adjustable bed base or contact Serta customer service directly. The manufacturer of this power cord kit is Motion Essentials Remotes.

You may also visit the official Serta Store on Amazon for additional product information or support resources.