Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Razer Kraken X Lite gaming headset. Please read this manual thoroughly to ensure optimal performance and longevity of your device.
Image: The Razer Kraken X Lite gaming headset, featuring a sleek black design with a flexible microphone and comfortable earcups.
Package Contents
- Razer Kraken X Lite Gaming Headset
- 3.5mm Audio Splitter Cable
- User Manual
Setup
Connecting the Headset
- Locate the 3.5mm audio jack on your gaming console, desktop, laptop, tablet, or mobile device.
- Insert the 3.5mm connector from the Razer Kraken X Lite headset into the audio jack.
- If your device has separate audio input (microphone) and output (headphone) ports, use the included 3.5mm audio splitter cable. Connect the headset's 3.5mm jack to the splitter, then connect the two splitter ends to the corresponding audio and microphone ports on your device.
Adjusting for Comfort
The Razer Kraken X Lite features an adjustable headband and oval ear cushions designed for extended use. Gently slide the earcups up or down along the headband until the headset fits comfortably over your ears. The ear cushions should fully enclose your ears without excessive pressure.
Image: The Razer Kraken X Lite headset resting on a desk, showcasing its adjustable headband and oval ear cushions for comfort.
Operating the Headset
Audio Controls
The headset features integrated controls for convenient audio management. A volume slider and a microphone mute button are located on the left earcup.
- Volume Slider: Slide up or down to adjust the audio output level.
- Microphone Mute Button: Press to toggle the microphone on or off.
Microphone Usage
The flexible cardioid microphone is designed to capture your voice clearly while minimizing background noise. Position the microphone approximately 1-2 inches from your mouth for optimal voice pickup.
Image: A close-up of the Razer Kraken X Lite's bendable cardioid microphone, illustrating its directional sound pickup pattern to suppress background noise.
7.1 Surround Sound (Software Enabled)
The Razer Kraken X Lite supports 7.1 surround sound through software, providing accurate positional audio. To enable and configure 7.1 surround sound, download and install the appropriate software from the official Razer website. Follow the on-screen instructions for installation and calibration.
Image: The Razer Kraken X Lite headset, highlighting its 7.1 surround sound capability for immersive audio experiences.
Maintenance
Cleaning
- Use a soft, dry cloth to wipe the headset's surfaces.
- For ear cushions, gently wipe with a damp cloth and mild soap if necessary, then dry thoroughly. Avoid excessive moisture.
- Do not use harsh chemicals or abrasive materials, as these can damage the headset's finish.
Storage
Store the headset in a clean, dry place away from extreme temperatures and direct sunlight. Avoid placing heavy objects on the headset to prevent damage.
Troubleshooting
No Audio / Low Volume
- Ensure the 3.5mm jack is fully inserted into the device's audio port.
- Check the volume slider on the headset and your device's system volume settings.
- Verify that the headset is selected as the default audio output device in your operating system's sound settings.
- Test the headset with another device to rule out a device-specific issue.
Microphone Not Working
- Ensure the microphone mute button on the headset is not activated.
- If using the splitter cable, ensure both audio and microphone jacks are correctly connected.
- Verify that the headset microphone is selected as the default input device in your operating system's sound settings.
- Check application-specific microphone settings (e.g., in communication software or games).
Specifications
| Model Name | Razer Kraken X Lite |
| Model Number | RZ04-02950100-R381 |
| Connectivity | Wired (3.5mm Jack) |
| Drivers | Custom-tuned 40 mm Dynamic Drivers |
| Frequency Response | 28 KHz (Headphones) |
| Impedance | 32 Ohms |
| Sensitivity | 60 dB (Headphones) |
| Microphone Type | Bendable Cardioid Microphone |
| Weight | Approximately 230g (0.5 lbs) |
| Ear Cushions | Oval, Faux Leather |
| Dimensions (L x W x H) | 7.87 x 5.91 x 3.94 inches |
| Compatible Devices | Gaming Consoles, Desktops, Laptops, Tablets, Telephones, Smart Speakers, Televisions |
Image: A detailed view of the Razer Kraken X Lite's ear cup, illustrating the custom-tuned 40mm drivers responsible for clear and balanced audio output.
Warranty and Support
For warranty information and technical support, please visit the official Razer support website or contact their customer service. Keep your proof of purchase for warranty claims.
Online Support: www.razer.com/support
