FORIOUS FB-0300BN
FORIOUS Brushed Nickel Bathroom Faucet User Manual
Model: FB-0300BN
Brand: FORIOUS
1. Product Overview
This manual provides detailed instructions for the installation, operation, and maintenance of your FORIOUS Brushed Nickel Bathroom Faucet. This widespread 3-hole vanity faucet features a 360° swivel spout, two handles for hot and cold water control, and includes a metal pop-up drain and 24-inch supply hoses. It is designed for modern bathroom sinks and constructed from stainless steel with a brushed nickel finish.
Image 1.1: Main components of the FORIOUS Brushed Nickel Bathroom Faucet, including the spout, two handles, metal pop-up drain, and braided supply hoses.
2. Package Contents
Verify that all components are present before beginning installation:
- Faucet Spout Assembly
- Hot Water Handle Assembly
- Cold Water Handle Assembly
- Metal Pop-Up Drain Assembly
- 2 x 24-inch Braided Flexible Supply Hoses (cUPC certified)
- Mounting Hardware (washers, nuts)
- Instruction Manual (this document)
- Aerator Removal Tool (if applicable)
3. Setup and Installation
Important: Before installation, ensure the water supply is turned off. It is recommended to consult a professional plumber if you are unfamiliar with plumbing installations. This faucet is suitable for 3-hole sinks with a 6-12 inch center spread, with an optimal installation effect between 6-10 inches. The maximum deck thickness should be 1.38 inches (35mm), and the hole size should be between 1.26 inches and 1.38 inches.
- Prepare the Sink: Clean the sink surface where the faucet will be installed. Ensure the mounting holes are clear and correctly sized.
- Install Faucet Handles: Insert the hot and cold water handle assemblies into the outer holes of the sink. Secure them from underneath with washers and mounting nuts. Ensure the handles are oriented correctly for operation.
- Install Faucet Spout: Insert the faucet spout assembly into the center hole. Secure it from underneath with the provided washer and mounting nut.
- Connect Supply Hoses: Connect the two 24-inch braided flexible supply hoses to the hot and cold water inlets on the faucet handles. The 3/8-inch thread is designed for US standard pipe connections. Connect the other ends of the hoses to your hot and cold water supply lines. Ensure all connections are hand-tightened, then use a wrench for a quarter turn to prevent leaks.
- Install Pop-Up Drain: Install the metal pop-up drain assembly into the sink drain hole. Ensure the rubber gaskets are correctly positioned to create a watertight seal. Tighten the retaining nut from underneath the sink. The filter basket can be easily removed for cleaning. Note: For sinks without overflow, the sink thickness must be greater than 0.76 inches.
- Test for Leaks: Once all connections are secure, slowly turn on the main water supply and check for any leaks around the faucet base, handle connections, and drain assembly.
Image 3.1: Visual guide illustrating the connection of the faucet components and supply lines under the sink.
Image 3.2: Detailed diagram outlining the faucet dimensions, recommended sink hole size, and maximum deck thickness for proper installation.
4. Operating Instructions
The FORIOUS bathroom faucet features two handles for precise control over water temperature and flow, along with a 360° swivel spout for enhanced flexibility.
- Water Flow Control: Turn the handles clockwise to decrease water flow and counter-clockwise to increase it.
- Temperature Control: The left handle controls hot water, and the right handle controls cold water. Adjust both handles to achieve the desired water temperature.
- Swivel Spout: The gooseneck spout can rotate 360 degrees, allowing for greater reach and convenience in your sink.
Image 4.1: The faucet's 360-degree swivel spout in action, demonstrating its flexibility and range of motion.
Image 4.2: Illustrations demonstrating the horizontal and vertical directions for operating the hot and cold water handles.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your faucet.
- Cleaning the Finish: Clean the brushed nickel finish with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish. The PVD (Physical Vapor Deposition) finish is designed to resist rust and peeling.
- Aerator Maintenance: The faucet includes a 1.2 GPM water-saving aerator. Periodically unscrew the aerator from the spout and rinse any debris or mineral buildup under running water. This helps maintain optimal water flow and reduces splash. A spare aerator is included.
- Drain Cleaning: The metal pop-up drain features a filter basket to prevent clogging. To clean, simply pull out the stopper and remove any accumulated hair or debris.
- Cartridge Longevity: The drip-free copper and ceramic disc mixing cartridge is tested for 500,000 cycles, ensuring stable and leak-free performance. No regular maintenance is typically required for the cartridge itself, but if leaks occur, replacement may be necessary.
Image 5.1: Illustration of the pop-up drain stopper being removed to access and clean the filter basket.
Image 5.2: Close-up of the faucet's aerator, highlighting its water-saving design and the recommendation for regular cleaning.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed shut-off valves. | Clean or replace the aerator. Ensure shut-off valves under the sink are fully open. |
| Leaks from Faucet Base | Loose mounting nuts; worn O-rings. | Tighten mounting nuts. Inspect and replace O-rings if necessary. |
| Leaks from Handles | Loose connections; faulty cartridge. | Ensure supply hose connections are tight. Replace the ceramic disc cartridge if it is faulty. |
| Drain Not Sealing Properly | Improperly installed drain; debris in drain. | Re-install the drain ensuring gaskets are correctly seated. Clean any debris from the drain stopper and basin. |
| Finish Peeling/Corroding | Use of abrasive cleaners; manufacturing defect. | Only use soft cloths and mild soap for cleaning. Contact customer support if the issue persists under normal use. |
7. Specifications
- Model Name: Bathroom Faucet
- Model Number: FB-0300BN
- Finish Type: Brushed Nickel
- Material: Stainless Steel (faucet), Metal (handles, drain)
- Mounting Type: Deck Mount
- Hole Count: 3
- Installation Type: Widespread (8 Inch)
- Number of Handles: 2
- Spout Design: Gooseneck
- Spout Height: 5.59 Inches
- Spout Reach: 5.31 Inches
- Maximum Flow Rate: 1.2 Gallons Per Minute (GPM)
- Hose Length: 24 Inches (cUPC certified PEX)
- Item Weight: 3 Pounds
- Product Dimensions: 3.2"D x 6.8"W x 8.58"H
- Special Features: 360 Swivel, Lead Free, Pop Up Drain, Water Saving System
- Certifications: cUPC, LEAD FREE, NSF, WaterSense, CEC, DOE
Image 7.1: Technical drawing displaying the precise dimensions of the faucet spout, handles, and supply hoses.
Image 7.2: Diagram highlighting the ceramic disc mixing cartridge, which has passed 500,000 cycle tests for durability and leak prevention.
8. Warranty and Support
The FORIOUS Brushed Nickel Bathroom Faucet is covered under FORIOUS's Service, which includes a Five-year limited warranty, ongoing parts replacement, and dedicated technical support. This warranty covers defects in material and manufacturing under normal use.
For warranty claims, technical assistance, or to order replacement parts, please contact FORIOUS customer service. Refer to the contact information provided on the product packaging or the official FORIOUS website.
Online Resources:
- Installation Manual (PDF): Download Here
- User Guide (PDF): Download Here
Related documentsFB-0300BN
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.