Coloplast 120215

Coloplast Brava Skin Barrier Wipe 120215 User Manual

Instructions for Use and Care

1. Introduction

This manual provides essential information for the safe and effective use of the Coloplast Brava Skin Barrier Wipe 120215. The Brava Skin Barrier Wipe is designed to protect the skin from problems associated with leakage and adhesives, without compromising the adhesion of ostomy barriers or other medical adhesives. It is a sting-free solution that dries quickly, leaving no residue.

2. Product Overview

The Brava Skin Barrier Wipe creates a protective film on the skin. Key features include:

  • Skin Protection: Forms a barrier to protect skin from effluent and adhesive trauma.
  • Sting-Free Formula: Gentle on sensitive or irritated skin.
  • Quick Drying: Dries within seconds, allowing for immediate application of an ostomy barrier or other adhesive products.
  • No Residue Buildup: Does not leave a sticky residue, ensuring optimal adhesion for subsequent products.
  • Non-Sterile: Intended for external use.
  • Dimensions: Approximately 2-3/4 x 4 inches per wipe.
  • Key Ingredient: Contains Hexamethyldisiloxane.

3. Safety Information

Please read and understand all safety information before using this product.

  • Avoid Contact with Eyes: In case of contact, flush eyes thoroughly with water.
  • Discontinue Use: If skin irritation or allergic reaction occurs, discontinue use immediately and consult a healthcare professional.
  • Do Not Flush: Used wipes should be disposed of in a waste bin; do not flush down the toilet.
  • External Use Only: This product is for external application to the skin only.
  • Keep Out of Reach of Children: Store in a safe place away from children.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is a medical device.

4. Setup and Preparation

Before applying the Brava Skin Barrier Wipe, ensure the skin is clean and dry.

  1. Gently clean the skin around the stoma or area where the adhesive product will be applied, using mild soap and water.
  2. Rinse the skin thoroughly to remove all soap residue.
  3. Pat the skin completely dry. Ensure there is no moisture remaining on the skin surface.
  4. Open the individual foil pouch containing the Brava Skin Barrier Wipe.

5. Operating Instructions (Application)

Follow these steps for proper application of the skin barrier wipe:

  1. Carefully remove the wipe from its packaging.
  2. Gently wipe the skin area where the adhesive product (e.g., ostomy barrier) will be applied. Ensure complete coverage of the intended area.
  3. Allow the barrier film to dry completely. This typically takes only a few seconds. The skin should feel smooth and non-tacky.
  4. Once dry, proceed with applying your ostomy barrier or other adhesive medical product as usual.
  5. Dispose of the used wipe in a trash receptacle.

6. Maintenance

The Brava Skin Barrier Wipe is a single-use product. Proper skin care is essential for maintaining healthy peristomal skin.

  • Always ensure the skin is clean and dry before applying a new barrier wipe and adhesive product.
  • Inspect your skin regularly for any signs of irritation, redness, or breakdown.
  • If skin issues persist, consult your healthcare professional or ostomy nurse.

7. Troubleshooting

If you encounter issues while using the Brava Skin Barrier Wipe, consider the following:

  • Skin Irritation: If redness, itching, or discomfort occurs, discontinue use and consult a healthcare professional. Ensure the skin was thoroughly cleaned and dried before application.
  • Adhesive Not Sticking: Ensure the barrier wipe has completely dried before applying the ostomy barrier. Any moisture or residue can affect adhesion.
  • Wipe Feels Dry: Ensure the individual pouch is sealed before use. If the wipe feels dry upon opening, it may have expired or been exposed to air; discard and use a fresh wipe.

8. Specifications

Product NameBrava Skin Barrier Wipe
Model Number120215
BrandColoplast
ApplicationSkin Barrier Protection
Unit Count30 Wipes per Pack
Skin TypeAll
ManufacturerColoplast
Item Dimensions (Approx.)2-3/4 x 4 inches (per wipe)
Package Dimensions5 x 4 x 3 inches
Weight6.4 ounces (package)
First Available DateAugust 27, 2019

9. Warranty and Support

For specific warranty information or product support, please contact Coloplast directly. Refer to the product packaging for contact details or visit the official Coloplast website. Always consult with your healthcare provider for medical advice regarding product use.

Manufacturer: Coloplast
Website: www.coloplast.com (Example link, actual link may vary)

© 2024 Coloplast. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.