Wendry USB 3.0 to SATA Three Bay Hard Drive Docking Station User Manual

1. Introduction

This manual provides detailed instructions for the Wendry USB 3.0 to SATA Three Bay Hard Drive Docking Station. This device allows for direct connection of 2.5-inch and 3.5-inch SATA/IDE hard drives without installation, supports offline cloning, and features multiple card reader slots and USB expansion ports.

Image 1: Front view of the Wendry Three Bay Hard Drive Docking Station.

2. Package Contents

Verify that all items are present in the package:

• Hard Drive Docking Station
• USB 3.0 Cable
• Power Adapter
• AC Power Cord
• User Manual (this document)

Image 2: Contents included in the product package.

3. Key Features

• Universal external USB 3.0 to SATA three-bay hard drive docking station.
• Direct plug for bare disks, no installation required.
• Supports 2.5-inch and 3.5-inch IDE hard drives.
• Supports 2.5-inch and 3.5-inch SATAI / II / III hard drives.
• USB 3.0 interface with data transfer rates up to 5Gbps.
• USB 2.0 interface with data transfer rates up to 480Mbps.
• Simultaneous reading of two hard drives (up to 6TB each).
• Two USB 2.0 expansion HUB interfaces.
• Integrated M2 / MS / TF / SD / MMC / CF / XD card slot (Max 64GB memory card, not included).
• 12V / 3A independent power supply for stable operation.
• Supports Windows XP / Vista / 7 / 8, Linux, and Mac OS.
• Supports hard disk offline clone functionality.

4. Setup Instructions

1. Connect Power: Connect the provided power adapter to the DC 12V input port on the back of the docking station. Plug the AC power cord into a wall outlet.
2. Connect to Computer: Connect the USB 3.0 cable from the docking station's USB 3.0 port to an available USB port on your computer.
3. Power On: Flip the ON/OFF switch on the back of the docking station to the 'ON' position. The power indicator light should illuminate.
4. Insert Hard Drives:
   • For 2.5-inch or 3.5-inch SATA drives, gently slide the drive into the designated SATA bays until it connects firmly.
   • For 2.5-inch or 3.5-inch IDE drives, align the IDE pins carefully and insert the drive into the IDE bay. Ensure a secure connection.
5. Driver Installation: The docking station is plug-and-play for most modern operating systems (Windows, Linux, Mac OS) and typically does not require manual driver installation. Your computer should automatically detect the connected drives.

Image 3: Rear panel with power switch, DC 12V input, and USB 3.0 port.

Image 4: Top view of the drive bays, including IDE and SATA slots, labeled Master C, Master B, and SON A.

5. Operating Instructions

5.1. Connecting Hard Drives

The docking station supports up to three hard drives simultaneously. Ensure the docking station is powered on before inserting or removing drives for optimal performance and to prevent data loss. Drives will appear as removable storage devices on your computer.

Image 5: Docking station in use with a notebook computer.

Image 6: Docking station in use with a desktop computer.

5.2. Using Card Reader Slots and USB Hub

The front panel of the docking station includes multiple card reader slots and two USB 2.0 expansion ports. Insert compatible memory cards (M2, MS, TF, SD, MMC, CF, XD) into their respective slots. Connect USB devices to the USB 2.0 ports for data transfer or charging.

Image 7: Front panel detailing card reader slots and USB ports.

5.3. Offline Clone Function

The offline clone function allows you to duplicate data from a source drive to a target drive without connecting to a computer. This feature is useful for creating backups or migrating data.

1. Disconnect USB: Ensure the USB 3.0 cable is disconnected from your computer. The docking station must operate in standalone mode for offline cloning.
2. Insert Source Drive: Insert the source hard drive (the drive you want to copy from) into either the "Master B" or "Master C" bay.
3. Insert Target Drive: Insert the target hard drive (the drive you want to copy to) into the "SON A" bay. Ensure the target drive has equal or greater capacity than the source drive.
4. Initiate Clone: Press and hold the "Clone" button (often labeled "One Touch" or similar) on the docking station for a few seconds until the cloning process begins. Progress indicators (e.g., 25%, 50%, 75%, 100%) will light up.
5. Completion: The cloning process is complete when all progress indicator lights are solid. Safely remove the drives.

Important: Ensure the USB cable is disconnected from the computer before initiating an offline clone to prevent accidental data loss on your computer's drives.

6. Maintenance

• Keep the docking station clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
• Do not attempt to disassemble the unit, as this will void the warranty and may cause damage.
• Ensure proper ventilation around the device during operation.

7. Troubleshooting

8. Specifications

• Output Interface: USB 3.0, OTC
• Supported Drives: All 2.5" & 3.5" SATA HDD, 2.5" & 3.5" IDE HDD
• Max Storage Capacity: Up to 6TB per drive (12TB total)
• Data Transfer Rate (USB 3.0): Up to 5Gbps
• Data Transfer Rate (USB 2.0): Up to 480Mbps
• Card Slots: M2 / MS / TF / SD / MMC / CF / XD (Max 64GB memory card)
• Power Input: 100-240V ~ 50-60Hz
• Power Output: 12V 3A
• Dimensions: Approximately 130 x 140 x 60mm (5.12 x 5.52 x 2.36 inches)
• Item Weight: Approximately 0.69 kg (1.52 lbs)
• Supported Operating Systems: Windows XP / Vista / 7 / 8, Linux, Mac OS
• Material: Metal, Plastic

Image 8: Product dimensions.

9. Warranty and Support

For warranty information or technical support, please refer to the vendor's website or contact their customer service directly. Keep your purchase receipt for warranty claims.