Important Safety Information
Before operating your Hover-1 Switch, please read all instructions thoroughly. Failure to follow these instructions may result in serious injury, property damage, and void your warranty. Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads, when riding.
- Always wear a helmet and appropriate safety gear (knee pads, elbow pads) when riding.
- Ensure the device is fully charged before each use.
- Do not ride under the influence of drugs or alcohol.
- Avoid riding on uneven surfaces, steep inclines, or in wet conditions.
- Always adhere to local traffic laws and regulations.
- Supervise children operating the device.
Image: Always wear a helmet and safety gear when operating the Hover-1 Switch.
Product Overview
The Hover-1 Switch is an innovative 2-in-1 electric device that transforms between a scooter and a skateboard. It is designed for recreational use, offering a unique and versatile riding experience. The device features a powerful 90W brushless motor, an electronic throttle and brake, and a durable construction for reliable performance.
Image: The Hover-1 Switch in its scooter configuration, ready for use.
Setup and Assembly
Initial Charging
Before first use, fully charge the Hover-1 Switch. The 25.2V Lithium-ion battery requires approximately 2.5 hours for a full charge.
- Locate the charging port on the device.
- Connect the charger to the device, then plug the charger into a standard wall outlet.
- The charging indicator light will change to show charging status (refer to charger manual for specific light indications).
- Once fully charged, disconnect the charger.
Converting Between Scooter and Skateboard Mode
The Hover-1 Switch features an easy lock and release mechanism for tool-free conversion.
- To convert from Scooter to Skateboard: Locate the lock and release mechanism near the base of the handlebar. Disengage the lock and carefully detach the handlebar and the front LED wheel assembly. Attach the included front skateboard wheels to the designated slots on the board. Ensure all components are securely fastened.
- To convert from Skateboard to Scooter: Remove the front skateboard wheels. Reattach the handlebar and front LED wheel assembly, ensuring the lock mechanism is fully engaged and secure.
Image: The "Switch" mechanism allows for easy conversion between scooter and skateboard modes without tools.
Operating Instructions
Controls
- Power Button: Located on the device, press to turn on/off.
- Electronic Throttle: Used to accelerate. Gently press to increase speed.
- Electronic Brake: Used to slow down or stop. Apply gently for smooth braking.
- Remote Control (Skateboard Mode): The skateboard mode is controlled via a remote. Refer to the remote's specific instructions for pairing and operation.
Battery Indicator
Monitor the battery level using the integrated indicator to ensure you have sufficient charge for your ride.
Image: The battery indicator helps you track the remaining charge.
Speed and Range
The Hover-1 Switch can reach different maximum speeds depending on the mode and rider weight. The maximum speed for the skateboard is 7 mph, and for the scooter, it is 9 mph. A full charge can provide a range of up to 2.5 miles.
Image: The Hover-1 Switch offers a maximum speed of 7 mph in skateboard mode and 9 mph in scooter mode.
Maintenance
Battery Care
- Charge the battery fully after each use.
- If storing for an extended period, charge the battery to 50% every 3 months to maintain battery health.
- Do not expose the battery to extreme temperatures.
Cleaning and Storage
- Wipe the device with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the Hover-1 Switch in a cool, dry place away from direct sunlight and moisture.
Troubleshooting
Specifications
Image: The Hover-1 Switch is powered by a 90W brushless motor for efficient performance.
Warranty Information
The Hover-1 Switch comes with a 90-day warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Hover-1 customer support. Refer to the official Hover-1 website for the most up-to-date contact information.
For additional resources and product information, you may visit the Hover-1 Brand Store on Amazon.
