Introduction
This manual provides detailed instructions for the safe and effective use of your Feyachi RS-30 Reflex Sight. Please read this manual thoroughly before operating the device to ensure proper setup, functionality, and longevity.
Product Overview
The Feyachi RS-30 Reflex Sight is designed for quick target acquisition and enhanced situational awareness. Key features include:
- Tubeless design with a 40 mm reflex lens aperture.
- Four selectable reticles and six brightness settings.
- Integrated mount for standard 20 mm Picatinny rails.
- Parallax corrected and unlimited eye-relief.
- Fully adjustable height, brightness, windage, and elevation.
- Constructed from high-grade aluminum alloy for durability and light weight.
- Rechargeable via USB-C port with motion-activated power-on and auto-off for extended battery life.
Setup
Package Contents
Verify that all items are present in the package:
- 1 x Feyachi RS-30 Reflex Sight
- 1 x Lens Cleaning Cloth
- 2 x Allen Wrenches
- USB-C Charging Cable (if included, some models may vary)
- Spare port covers (if included)
Mounting the Sight
- Ensure your firearm is unloaded and safe.
- Loosen the two screws on the base of the reflex sight using the provided Allen wrench.
- Align the sight's integrated mount with a standard 20mm Picatinny rail on your firearm.
- Slide the sight onto the rail to your desired position.
- Tighten the two screws on the base firmly to secure the sight. Do not overtighten.
Battery Installation & Charging
The Feyachi RS-30 Reflex Sight features a built-in rechargeable battery. To charge:
- Locate the rubber cover for the USB-C charging port on the side of the sight.
- Gently lift the cover to expose the port.
- Connect the provided USB-C cable to the sight and a compatible power source.
- A small indicator light will show the charging status.
- Once fully charged, disconnect the cable and securely close the rubber cover to maintain water resistance.
Note: While some older models or generic images might show LR44 batteries, the Feyachi RS-30 is designed with a built-in rechargeable battery for convenience and extended use.
Video demonstrating the unboxing and features of a rechargeable reflex sight, including its built-in charging port and controls.
Operating the Sight
Power On/Off and Brightness Adjustment
The sight features push-button controls for power and brightness:
- To power on, press and hold the center button (or the 'On' button if separate).
- To adjust brightness, press the up or down arrow buttons (or repeatedly press the power button to cycle through settings). The RS-30 offers six distinct brightness levels.
- To power off, press and hold the center button (or the 'Off' button if separate).
Reticle Selection
The RS-30 offers four selectable reticle patterns. To change the reticle:
- Locate the reticle selector knob, typically found at the rear of the sight.
- Rotate the knob to cycle through the available reticle options (dot, circle dot, crosshair, circle crosshair).
Windage and Elevation Adjustment
To zero your sight, adjust the windage and elevation using the provided Allen wrenches:
- Elevation Adjustment: Located on the top of the sight. Turn the screw clockwise to move the point of impact down, and counter-clockwise to move it up.
- Windage Adjustment: Located on the side of the sight. Turn the screw clockwise to move the point of impact right, and counter-clockwise to move it left.
- Each click typically represents 1 MOA (Minute of Angle) adjustment.
Motion Activation (Motion Awake)
The RS-30 features a motion-activated system to conserve battery life:
- The sight will automatically power on when motion is detected.
- After approximately 4 minutes of inactivity, the sight will enter a sleep mode to save power.
- Any movement will instantly reactivate the sight.
Detailed review of the EZshoot Rechargeable Motion Awake Red Green Dot Sight, highlighting its motion activation, red/green reticle options, and USB-C charging.
Maintenance
Cleaning
To maintain optimal performance and clarity:
- Use the provided lens cleaning cloth to gently wipe the objective and ocular lenses.
- Avoid using abrasive materials or harsh chemicals, as these can damage the lens coatings.
- For stubborn dirt, a small amount of lens cleaning solution designed for optics can be applied to the cloth, not directly to the lens.
Battery Care
Regular charging ensures your sight is always ready for use. Always ensure the USB-C port cover is securely closed when not charging to protect against moisture and debris.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sight does not turn on. | Low or depleted battery. | Charge the sight using the USB-C cable. Ensure the charging cable is properly connected. |
| Reticle is dim or flickers. | Low battery or incorrect brightness setting. | Charge the battery. Adjust the brightness level using the side buttons. |
| Reticle does not hold zero. | Improper mounting or excessive recoil. | Ensure the sight is securely mounted to the Picatinny rail. Re-zero the sight after significant recoil or impact. |
| Reticle appears blurry or distorted. | Lens is dirty or user has astigmatism. | Clean the lenses with the provided cloth. If the issue persists, it may be related to individual eyesight (e.g., astigmatism) and not a defect of the sight. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Feyachi |
| Model Name | 1030 |
| Color | Black |
| Style | Red Dot Sight |
| Product Dimensions | 3.6"L x 1.7"W x 2.3"H |
| Item Weight | 4.9 Ounces |
| Material | Aluminum |
| Magnification Maximum | 1.0 |
| Objective Lens Diameter | 42 Millimeters |
| Magnification Minimum | 1 |
| Compatible Devices | Shotgun (and other Picatinny rail compatible firearms) |
| Mounting Type | Picatinny Mount |
| Field Of View | 15.8 Meters |
| UPC | 766646248946 |
| Part Number | FE690031001030 |
Warranty and Support
The Feyachi RS-30 Reflex Sight comes with a 1-year warranty from the date of purchase. For warranty claims, technical support, or any inquiries, please contact Feyachi customer service through their official channels or the retailer where the product was purchased.
Additional support and product information may be available on the Feyachi Store on Amazon.
