Introduction
This manual provides essential instructions for the RM-Series Replacement Remote Control, designed specifically for the Silvercrest SSR 1080 B2 device. This remote control is engineered to replicate all functions of your original remote without requiring any programming or setup. Simply insert batteries, and it is ready for immediate use.
The RM-Series remote controls are assembled and tested in the UK, utilizing advanced chip-sets to ensure precise infra-red code matching with the original device. All buttons are correctly labeled to indicate their specific functions, eliminating the need for constant manual reference.
Figure 1: Front view of the RM-Series Replacement Remote Control. This image displays the full layout of buttons, including power, number pad, navigation, volume, channel, and various function keys.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or press the latch and lift to open.
- Insert two AAA alkaline batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Figure 2: Back view of the remote control (left) and with the battery compartment open (right). The image on the right clearly shows the battery slots and polarity markings for correct battery insertion.
First Use
Once batteries are installed, the remote control is ready for immediate use with your Silvercrest SSR 1080 B2 device. No pairing or programming is required.
Operating Instructions
This RM-Series remote control provides full functionality identical to your original Silvercrest SSR 1080 B2 remote. All buttons are clearly labeled to indicate their specific functions.
- Power Button: Located at the top left, press to turn your device on or off.
- Number Pad (0-9): Use to directly input channel numbers or other numerical selections.
- Navigation Buttons (Up, Down, Left, Right, OK): Used for menu navigation and selection.
- Volume Up/Down (VOL +/-): Adjusts the audio volume.
- Channel Up/Down (P +/-): Changes the television channel.
- Mute Button: Toggles audio mute on/off.
- Source/Input Button: Selects the input source (e.g., HDMI 1, AV).
- Menu Button: Accesses the device's main menu.
- Back/Exit Buttons: Returns to the previous screen or exits a menu.
- Playback Controls (REC, PLAY, PAUSE, STOP, PREV, REW, FWD, NEXT): Controls media playback functions.
- Dedicated Function Buttons: Buttons such as NETFLIX, YOUTUBE, etc., provide direct access to specific applications or features, if supported by your device.
Point the remote control directly at the infrared receiver on your Silvercrest SSR 1080 B2 device for optimal performance. Ensure there are no obstructions between the remote and the device.
Maintenance
Battery Replacement
Replace batteries when the remote's response becomes sluggish or stops functioning. Always replace both batteries simultaneously with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.
Cleaning
To clean the remote control, gently wipe the surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the remote's electronics or finish.
Storage
When not in use for extended periods, it is advisable to remove the batteries to prevent leakage, which can damage the remote control.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote control and the device's infrared receiver.
- Confirm you are pointing the remote directly at the device.
- Some functions not working:
- Verify that the function you are trying to use is supported by your Silvercrest SSR 1080 B2 device.
- Ensure the remote is within the effective operating range (up to 10 meters).
Specifications
| Feature | Detail |
|---|---|
| Brand | RM-Series |
| Model Number | X40766Y40766-SSR 1080 B2 |
| Compatible Device | Silvercrest SSR 1080 B2 (Television) |
| Connectivity Technology | Infrared (IR) |
| Controller Type | Button Control |
| Maximum Range | 10 Metres |
| Power Source | 2 x AAA Alkaline Batteries (not included) |
| Product Dimensions | 22.7 x 5 x 2.4 cm |
| Item Weight | 87 Grams |
Warranty and Support
Information regarding a specific warranty period for this RM-Series Replacement Remote Control is not provided in the product details. For any warranty-related inquiries or technical support, please contact the retailer or the manufacturer, RM-Series, directly.
This product is CE and ROHS compliant, indicating adherence to European safety, health, and environmental protection standards.
