User Manual: 13.5V AC/DC Adapter

1. Introduction

This manual provides essential information for the safe and effective use of your SupplySource 13.5V AC/DC Adapter. This adapter is designed as a direct replacement power supply for the Super Start Part # 55003 Jump Starter 1000 Peak Amp Power Pack. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage or injury.

2. Safety Information

Your safety is paramount. Please observe the following precautions:

• Compatibility Check: Before connecting, always verify that the DC output voltage and tip size of this adapter match the requirements of your Super Start Part # 55003 Jump Starter. Incorrect voltage or tip size can damage your device.
• Ventilation: When in use for extended periods, ensure the adapter is placed in a well-ventilated area with adequate humidity. Avoid covering the adapter or placing it in enclosed spaces.
• Surface Contact: Do not place the adapter directly on skin products or other heat-sensitive materials during operation, as it may generate heat.
• Built-in Safety Features: This adapter is manufactured with high-quality materials and includes multiple smart features for protection against:
  • Over Charge (OCP)
  • Over Voltage (OVP)
  • Short-circuit (SCP)
  • Over Current (OC)
  • Over Temperature (OTP)
• Certifications: The charger is certified with CE and FCC, ensuring compliance with safety and quality standards.
• Non-OEM Notice: This is a brand new, high-quality replacement adapter (non-OEM). Ensure it is compatible with your specific device model before purchase and use.

Figure 1: Adapter highlighting built-in safety electronics and 24-month warranty. These features protect against various electrical faults, ensuring safe operation.

3. Product Overview

The SupplySource 13.5V AC/DC Adapter is a robust power supply unit designed for reliability and efficiency. It features a durable casing and a high-quality copper core wire to ensure longevity and stable power delivery.

Figure 2: The 13.5V AC/DC Adapter with its integrated power cord. The cord is neatly coiled and secured with a hook-and-loop strap for storage.

Figure 3: Side view of the adapter, illustrating its compact design and the approximate 4-foot length of the power cable.

4. Specifications

5. Setup

1. Verify Compatibility: Before plugging in, double-check that the DC output specifications (voltage and connector size) of this adapter precisely match the input requirements of your Super Start Part # 55003 Jump Starter.
2. Connect to Device: Insert the barrel connector of the adapter firmly into the charging port of your Super Start Part # 55003 Jump Starter.
3. Connect to Power Outlet: Plug the AC prongs of the adapter into a standard wall power outlet (100-240V AC).

6. Operating Instructions

Once properly connected, the adapter will begin supplying power to your Super Start Part # 55003 Jump Starter. The charging status will typically be indicated by an LED light on your jump starter unit (refer to your jump starter's manual for specific charging indicators).

• Allow the jump starter to charge fully as per its manufacturer's recommendations.
• Disconnect the adapter from the jump starter and the wall outlet once charging is complete or when the jump starter is not in use.

7. Maintenance

• Cleaning: Disconnect the adapter from all power sources before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: Store the adapter in a cool, dry place away from direct sunlight, excessive heat, and moisture. Keep the cable neatly coiled to prevent kinks or damage.
• Ventilation: Ensure adequate ventilation during prolonged use to prevent overheating.
• Cable Care: Avoid bending or crimping the power cord excessively, as this can damage the internal wiring.

8. Troubleshooting

If you encounter issues with your adapter, consider the following common solutions:

• No Power Output:
  • Ensure the adapter is securely plugged into a functioning wall outlet.
  • Check if the wall outlet itself is receiving power (test with another device).
  • Verify that the barrel connector is fully inserted into the jump starter's charging port.
• Slow Charging:
  • Confirm that the adapter's output specifications (13.5V) match the jump starter's input requirements.
  • Ensure the jump starter is not being used simultaneously for other functions that draw significant power.
• Adapter Overheating:
  • Disconnect the adapter immediately.
  • Ensure it is in a well-ventilated area and not covered.
  • If overheating persists, discontinue use and contact customer support.

If problems persist after attempting these solutions, please refer to the Warranty and Support section.

9. Warranty and Support

This SupplySource 13.5V AC/DC Adapter comes with a 24-month warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact your retailer or the manufacturer directly.

For returns, please adhere to the retailer's return policy, which typically allows returns within 30 days of purchase.

Manufacturer: SupplySource