1. Introduction
Thank you for choosing the Vicco Repose Dining Table. This table, with its Sonoma finish and compact 65x65cm dimensions, is designed to be a versatile and space-saving solution for small dining areas or kitchens. Its ergonomic design and stable construction ensure comfortable use. This manual provides essential information for assembly, safe operation, maintenance, and troubleshooting to ensure you get the most out of your product.
Figure 1: The Vicco Repose Dining Table in a typical kitchen environment.
2. Safety Information
Please read and understand all safety instructions before assembling and using the table. Failure to follow these instructions may result in injury or damage to the product.
- Assembly: Always assemble the table on a soft, clean surface to prevent scratches. Ensure all screws and fasteners are tightened securely before use. Do not overtighten.
- Stability: Place the table on a flat, stable surface. Avoid placing heavy objects unevenly on the tabletop.
- Weight Limit: Do not exceed the maximum recommended weight of 13 kg (28.6 lbs) on the tabletop.
- Children: Keep small parts and packaging materials away from children during assembly. Do not allow children to climb on or play with the table.
- Movement: When moving the table, lift it rather than dragging it to prevent damage to the legs or floor.
3. Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop (1x)
- Table Base/Legs (1x set)
- Assembly Instructions (1x)
- Mounting Hardware (screws, dowels, etc.) (1x set)
Note: Decorative items shown in product images are not included.
4. Assembly Instructions
Assembly of the Vicco Repose Dining Table typically requires two people. Please follow the detailed assembly instructions provided in the package. A Phillips head screwdriver and possibly a hammer (for dowels) may be required.
General Assembly Steps:
- Unpack all components and lay them out on a protective surface.
- Identify all parts and hardware using the provided parts list.
- Attach the base components together according to the diagrams in the separate assembly guide.
- Securely attach the assembled base to the tabletop using the provided screws and fittings.
- Ensure all connections are tight and stable.
Figure 2: The fully assembled Vicco Repose Dining Table.
5. Operating Instructions (Usage)
The Vicco Repose Dining Table is designed for dining and general household use. Its compact size makes it ideal for small kitchens, dining nooks, or as an auxiliary surface.
- Placement: Position the table in a location that allows for comfortable seating and movement around it.
- Surface Protection: Use placemats or coasters to protect the tabletop surface from heat, moisture, and scratches.
- Even Load: Distribute weight evenly across the tabletop to maintain stability and prevent stress on the structure.
- Intended Use: This table is primarily for dining. Avoid using it as a step stool or for activities that could compromise its stability or finish.
Figure 3: The table ready for use with seating.
6. Maintenance and Care
Proper care will help maintain the appearance and longevity of your Vicco Repose Dining Table.
- Cleaning: Wipe the table surface with a dry or damp cloth. For stubborn marks, use a mild, non-abrasive cleaner specifically designed for furniture surfaces.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or polishes containing silicone, as these can damage the melamine finish.
- Spills: Clean up spills immediately to prevent staining or moisture damage.
- Heat and Moisture: Protect the surface from direct heat and excessive moisture. Always use coasters for drinks and hot pads for hot dishes.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration over time.
- Fasteners: Periodically check all screws and fasteners and tighten them if necessary to ensure the table remains stable.
7. Troubleshooting
If you encounter any issues with your Vicco Repose Dining Table, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Loose fasteners; uneven floor | Tighten all assembly screws. Move table to a level surface or use shims under the base. |
| Scratches on surface | Sharp objects; abrasive cleaning | Use placemats/coasters. Avoid dragging objects. Use soft cloths for cleaning. Minor scratches may be concealed with furniture repair kits. |
| Discoloration | Prolonged sun exposure; harsh chemicals | Relocate table away from direct sunlight. Use only recommended cleaning agents. |
8. Specifications
Detailed technical specifications for the Vicco Repose Dining Table:
- Brand: Vicco
- Model: Repose
- Product Dimensions (L x W x H): 65 cm x 65 cm x 78 cm (25.6 in x 25.6 in x 30.7 in)
- Item Weight: 12.9 Kilograms (28.4 lbs)
- Maximum Weight Recommendation: 13 Kilograms (28.6 lbs)
- Frame Material: Melamine
- Color: Sonoma
- Top Material Type: Engineered Wood with Melamine Resin Coating
- Care Instructions: Wipe with a dry or damp cloth
- Recommended Uses: Dining
- Shape: Square
Figure 4: Detailed dimensions of the Vicco Repose Dining Table.
9. Warranty and Support
Vicco products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Vicco website. If you require assistance with assembly, missing parts, or have any questions not covered in this manual, please contact Vicco customer support through their official channels or the retailer from whom you purchased the product.
Please retain your proof of purchase for any warranty claims.