Introduction
This manual provides instructions for the ALLIMITY Replacement Remote Control, designed to operate various Sanyo LCD HDTV models. This remote control is an infrared (IR) device and requires no programming; simply insert batteries to begin use.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards or outwards to open.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment. Batteries are not included.
- Replace the battery cover by sliding it back into position until it clicks securely.
Image: Rear view of the remote control with the battery cover removed, illustrating the correct placement for two AAA batteries.
Operation
Basic Functions
Once batteries are installed, the remote control is ready for use. Point the remote control directly towards the infrared sensor on your Sanyo LCD HDTV. Ensure there are no obstacles between the remote and the TV sensor.
Image: Front view of the ALLIMITY Replacement Remote Control, displaying its button layout.
Compatible Models
This replacement remote control is compatible with a wide range of Sanyo LCD HDTV models. Below is a list of known compatible models:
- GXFA Series: DP19648, DP26640, DP26648, DP26649, DP32648, DP32649, DP37649, DP37819, DP39842, DP39843, DP39E23, DP42848, DP42849, DP46812, DP46819, DP46848, DP46849, DP50719, DP52848, FVE3923, FVE3963, DP19649
- GXBD Series: DP26647, DP26746, DP32647, DP32746, DP37647, DP42545, DP42647, DP42746, DP50747, HT27546, HT27547, HT32546, HT27745, HT28745, HT30746, DP26647A, DP37647AR
- GXBM Series: DP32640, DP32642, DP42142, DP42740, DP42841, DP46841, DP47840, DP50741, DP50842, FVM3982, FVM4212, FVM5082, DP42840, DP26640-00, DP26640-01, DP26640-02, DP26640-04, DP32640-00, DP32640-01, DP32640-03
- CS-90283-1T Series: DP32242, DP46142
If your specific model is not listed, please refer to the support section for assistance.
Image: A visual comparison of the ALLIMITY replacement remote with various original Sanyo remote controls, highlighting compatibility.
Maintenance
Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water or a mild cleaning solution. Avoid using harsh chemicals or abrasive materials, as these can damage the remote's surface or internal components.
Storage
When not in use for extended periods, it is recommended to remove the batteries to prevent leakage, which can damage the remote control. Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
Remote Control Not Responding
- Check Batteries: Ensure batteries are inserted correctly with the correct polarity (+/-). Replace old or depleted batteries with new AAA batteries.
- Line of Sight: Verify that there are no obstructions between the remote control and the TV's infrared sensor. The remote requires a clear line of sight to function.
- Distance: Ensure you are within an effective range of the television.
Specific Functions Not Working
While this is a direct replacement, some advanced or rarely used functions might behave differently or not be present compared to the original remote. If a primary function (e.g., power, volume, channel) is not working, refer to the 'Remote Control Not Responding' section.
Specifications
- Product Dimensions: 7 x 2 x 0.7 inches
- Item Weight: 2.25 ounces
- Model Number: AMT-4IN1-GXFA
- Batteries Required: 2 AAA batteries (not included)
- Connective Technology: Infrared (IR)
- Compatible Devices: Sanyo LCD HDTVs
- Color: Black
Support
For further assistance, including inquiries about specific model compatibility not listed in this manual, please contact ALLIMITY customer support. While specific warranty details are not provided in this document, please retain your purchase receipt for any potential warranty claims.