1. Introduction
Thank you for choosing the SUPERJARE Patio Umbrella Cover. This manual provides essential information for the proper setup, operation, and maintenance of your new umbrella cover. Designed with durability and ease of use in mind, this cover will help protect your patio umbrella from the elements.
Key Features:
- Resistant & Durable Material: Made of heavy-duty 600D Oxford fabric, offering superior strength compared to polyester. The material has passed American Standard Class 4 certification for color fastness to light, ensuring long-lasting use without deformation or fading.
- Easy to Use: Includes an installation rod for effortless placement over the umbrella, eliminating the need for ladders. The support rod is connected by a rope, allowing for flexible extension or flexion and free storage.
- Easy to Clean: Simply wipe with a damp cloth and allow to air dry.
- Attractive Detail Treatment: Features an extra magic tape to tighten the cover when the umbrella is idle, saving storage space. A bottom rubber band conveniently gathers the lower side during storage, preventing wind from blowing the cover away.
- Various Choices: Dimensions are 89.5"(L) × 21.6"(W), suitable for most outdoor umbrellas ranging from 7 to 11 ft, and 15 ft double-sided umbrellas.
2. Setup Instructions
Follow these steps to properly install your SUPERJARE Patio Umbrella Cover:
- Prepare the Umbrella: Ensure your patio umbrella is fully closed and secured.
- Assemble the Installation Rod: Connect the sections of the provided fiberglass rod.
- Insert the Rod: Insert the assembled rod through the copper ring located on the side of the umbrella cover. This rod will assist in lifting the cover over the umbrella.
- Drape the Cover: Using the installation rod, lift and drape the cover over the top of your closed patio umbrella. Guide the cover down until it fully encloses the umbrella.
- Close the Zipper: Pull the zipper down from top to bottom to secure the cover around the umbrella.
- Secure Straps: Fasten the magic tape strap(s) around the middle of the cover to cinch it tightly, preventing wind from dislodging it.
- Adjust Bottom Elastic: Ensure the elastic band at the bottom of the cover is snug around the umbrella base to provide a secure fit.
Setup Video Guide
Video 2.1: A detailed demonstration of how to install the SUPERJARE Outdoor Umbrella Cover.
Video 2.2: Instructions on using the SUPERJARE Patio Umbrella Cover with Rod.
3. Operating Instructions
To use your patio umbrella, simply reverse the installation steps:
- Unfasten Straps: Release the magic tape strap(s) and the bottom elastic band.
- Unzip Cover: Unzip the cover completely.
- Remove Cover: Carefully lift the cover off the umbrella. You can use the installation rod to assist if needed.
- Store Cover: Fold the cover neatly and store it in a dry place. The installation rod can be disassembled and stored within the cover's designated pocket.
- Open Umbrella: Proceed to open your patio umbrella as usual.
4. Maintenance
Proper maintenance will extend the life of your umbrella cover:
- Cleaning: To clean the cover, wipe it down with a damp cloth. For stubborn dirt, a mild soap solution can be used. Rinse thoroughly with water.
- Drying: Always allow the cover to air dry completely before folding and storing to prevent mold and mildew growth.
- Storage: When not in use for extended periods, store the cover in a cool, dry place away from direct sunlight.
- Inspection: Periodically inspect the cover for any signs of wear, tears, or damage. Address minor issues promptly to prevent further deterioration.
5. Troubleshooting
If you encounter any issues with your umbrella cover, consider the following:
- Cover is difficult to put on/take off: Ensure the umbrella is fully closed and compact. Use the provided installation rod to assist in lifting and guiding the cover.
- Cover appears loose: Tighten the magic tape strap(s) and adjust the bottom elastic band for a snug fit.
- Water accumulation on cover: While the cover is waterproof, ensure it is draped properly to allow water to run off. Avoid leaving depressions where water can pool.
- Mildew/Mold: If mildew or mold appears, clean the affected area immediately with a mild soap and water solution, then thoroughly air dry. Ensure the cover is completely dry before storage.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | SUPERJARE |
| Model Number | B07WDWR2Z7 |
| Material | 600D Oxford Fabric |
| Color | Gray |
| Water Resistance Level | Waterproof |
| Closure Type | Zipper |
| Strap Type | Drawstring, Magic Tape |
| Item Weight | 2.9 Pounds |
| Dimensions (L×W) | 89.5" × 21.6" |
| Compatibility | 7 to 11 Ft Umbrellas & 15 Ft Double-Sided Umbrellas |
7. Warranty Information
Specific warranty details for the SUPERJARE Patio Umbrella Cover are not provided in the product information. Please refer to the product packaging or contact the manufacturer directly for warranty inquiries.
8. Support
For further assistance or questions regarding your SUPERJARE Patio Umbrella Cover, please visit the official SUPERJARE store on Amazon or contact their customer service. You can find their store at: SUPERJARE Store.