Ciglow F18 Night Vision 1080P Headband Sport Camera with Headlamp User Manual

1. Introduction

This manual provides essential instructions for the safe and effective operation of your Ciglow F18 Night Vision 1080P Headband Sport Camera with Headlamp. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

• Do not expose the device to extreme temperatures, direct sunlight, or corrosive liquids.
• Keep the device away from water unless specifically designed for waterproof use (this product is not specified as waterproof).
• Use only the provided USB cable for charging.
• Do not attempt to disassemble or modify the device.
• Store the device out of reach of children.

3. Package Contents

Verify that all items are present in the package:

• 1 x Ciglow F18 Sport Camera
• 1 x USB Cable
• 1 x Head Rope (Headband)
• 1 x User Manual

Figure 3.1: Included components of the Ciglow F18 package.

4. Product Overview

The Ciglow F18 integrates a 1080P camera with a powerful headlamp, designed for outdoor activities.

Figure 4.1: Front view of the Ciglow F18 camera unit, showing the 1080P camera lens and the LED headlamp.

Figure 4.2: Side view of the Ciglow F18 camera, illustrating the control buttons and ports.

5. Setup

5.1. Charging the Device

1. Connect the provided USB cable to the charging port on the camera unit.
2. Connect the other end of the USB cable to a standard USB power adapter (not included) or a computer USB port.
3. The device will indicate charging status (e.g., an indicator light).
4. A full charge provides approximately 1.5 hours of operation with the LED light on, or 6 hours with the LED light off.

5.2. Memory Card Installation

The device supports a Micro SD memory card up to 32GB (not included).

1. Locate the memory card slot on the side of the camera unit.
2. Gently insert the Micro SD card into the slot until it clicks into place. Ensure correct orientation.
3. To remove, gently press the card until it springs out.

5.3. Attaching the Headband

1. Attach the camera unit to the elastic headband using the designated clips or slots.
2. Adjust the headband for a comfortable and secure fit on your head.

Figure 5.1: The Ciglow F18 camera unit securely attached to the elastic headband.

6. Operating Instructions

6.1. Power On/Off

• To power on: Press and hold the Power button until the indicator light illuminates.
• To power off: Press and hold the Power button until the indicator light turns off.

6.2. Video Recording

The camera records video in 1080P resolution (1920*1080) in AVI format.

1. Ensure a memory card is properly installed.
2. Power on the device.
3. Press the Record button (refer to Figure 4.2 for button location) to start recording. The indicator light will change to confirm recording is active.
4. Press the Record button again to stop recording.

6.3. Headlamp Operation

• To turn on/off the LED headlamp: Short press the LED button (refer to Figure 4.2).
• To activate SOS mode: Long press the LED button. The headlamp will flash in an SOS pattern.

Figure 6.1: The Ciglow F18 headlamp in SOS mode, providing an emergency signal.

7. Maintenance

• Clean the camera lens and headlamp with a soft, dry cloth. Avoid abrasive materials.
• Store the device in a cool, dry place when not in use.
• Periodically charge the battery if storing for extended periods to maintain battery health.

8. Troubleshooting

9. Specifications

Figure 9.1: Physical dimensions of the Ciglow F18 camera unit.

10. Warranty and Support

Specific warranty information is not provided in the product details. For support or warranty inquiries, please contact your retailer or the manufacturer directly.