1. Product Overview
The Snailfly Crossbars are designed to provide a robust and secure roof rack solution for specific Jeep Grand Cherokee models. These crossbars facilitate the transport of various cargo, enhancing vehicle utility for travel and outdoor activities. Constructed with upgraded stainless steel bases, they offer a high load capacity and feature an aerodynamic design to minimize wind noise.
Image 1.1: Snailfly Crossbars installed on a Jeep Grand Cherokee, demonstrating their appearance and fit.
2. Product Compatibility
These crossbars are specifically designed for a precise fit on 2011-2021 Jeep Grand Cherokee models equipped with METAL SIDE RAILS. It is crucial to verify your vehicle's roof rail type before installation.
- Compatible Models: 2011-2021 Jeep Grand Cherokee with Notch Roof Rack (e.g., Freedom, Laredo, Limited, Overland, Summit, Trailhawk).
- Incompatible Models: Not suitable for High Altitude, SRT, or Trackhawk models with Plastic Rails, nor for Grand Cherokee 2022+ or Grand Cherokee L models.
Image 2.1: Visual guide to applicable Jeep Grand Cherokee models, distinguishing between compatible notch roof racks and incompatible black roof racks.
Image 2.2: Illustration confirming compatibility with Grand Cherokee WK2 (2011-2021) and incompatibility with 2022+ models.
The crossbars are designed to be compatible with vehicles featuring a sunroof, ensuring no interference with its operation.
Image 2.3: Crossbar installation demonstrating compatibility with a vehicle sunroof.
3. Setup and Installation
3.1. Components
The Snailfly Crossbars package includes two crossbars (front and rear), each with sturdy stainless steel clamps and an anti-rust, anti-corrosion black powder coating. Necessary tools for installation are typically included.
Image 3.1: Product details highlighting key features such as clamps, coating, and adjustment points.
3.2. Dimensions
- Rear Bar Length: Approximately 39.2 inches
- Front Bar Length: Approximately 40.4 inches
Image 3.2: Product dimension diagram for front and rear crossbars.
3.3. Installation Steps
- Identify Front and Rear Bars: The front bar is typically longer (approx. 40.4 inches) and may have a label indicating its position. The rear bar is shorter (approx. 39.2 inches).
- Adjust Crossbar Length: Use the provided tool (e.g., Allen wrench) to adjust the length of the crossbars to fit your vehicle's roof rails. This involves loosening screws, sliding the bar to the desired length, and then tightening the screws securely.
- Position Crossbars: Place the front and rear crossbars onto the vehicle's metal side rails at appropriate distances for even weight distribution and cargo stability.
- Secure Clamps: Loosen the screws on the clamps to allow the inner black slider to extend, facilitating clamping onto the vehicle's side rails. Once positioned correctly, tighten the screws firmly to secure the crossbars in place. Ensure all clamps are tight and the crossbars are stable before use.
Image 3.3: Step-by-step visual guide for adjusting crossbar length and preparing clamps for installation.
4. Operating Instructions
4.1. Load Capacity
The Snailfly Crossbars have a maximum load capacity of 260 LBS (approximately 118 kg). It is critical not to exceed this weight limit to ensure safety and prevent damage to the crossbars or your vehicle.
Image 4.1: Examples of cargo that can be transported, emphasizing the 260 LBS load capacity.
4.2. Cargo Securing
Always ensure that cargo is securely fastened to the crossbars using appropriate straps, nets, or other securing devices. Distribute weight evenly across the crossbars. Regularly check the security of your cargo and the crossbar attachments during long journeys.
4.3. Driving Considerations
When carrying cargo on the roof, be mindful of increased vehicle height, especially when entering garages, car washes, or low-clearance areas. Adjust driving speed and style to account for the altered center of gravity and increased wind resistance.
5. Maintenance
- Regular Inspection: Periodically inspect the crossbars, clamps, and mounting hardware for any signs of wear, damage, or looseness. Tighten any loose fasteners immediately.
- Cleaning: Clean the crossbars with mild soap and water. Avoid abrasive cleaners or solvents that could damage the black powder coating.
- Storage: If the crossbars are not in use for an extended period, consider removing them and storing them in a dry place to prolong their lifespan.
6. Troubleshooting
- Crossbars Seem Loose: Re-check all mounting screws and ensure they are tightened securely. Verify that the crossbars are correctly seated on the vehicle's metal side rails.
- Excessive Wind Noise: Ensure crossbars are installed correctly and all components are tight. Aerodynamic design minimizes noise, but some noise may occur depending on vehicle speed and cargo.
- Difficulty Adjusting Length: Ensure the adjustment screws are sufficiently loosened before attempting to slide the bar. Clean any debris from the sliding mechanism.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Snailfly |
| Model Number | SN-JGCCB0B |
| Color | Black |
| Load Capacity | 260 Pounds |
| Mounting Type | Clamp Mount, Roof Mount, Rails, Cross, Crossbar Mount |
| Automotive Fit Type | Vehicle Specific Fit (2011-2021 Jeep Grand Cherokee with Metal Side Rails) |
| Item Weight | 13.77 pounds |
| Package Dimensions | 45.5 x 7 x 6.3 inches |
| Material | Aluminum Alloy with Stainless Steel Clamps |
| Is Foldable | No |
8. Support and Warranty
Snailfly is committed to providing high-performance and durable products. For any questions regarding product compatibility, installation, or performance, please contact Snailfly customer service. The product is backed by reliable after-sales service to ensure customer satisfaction.
Please refer to your purchase documentation or the Snailfly official website for specific warranty terms and contact information.
