UltraPro 18-inch Plug-in Linkable Under Cabinet LED Light Fixture

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your UltraPro 18-inch Plug-in Linkable Under Cabinet LED Light Fixture. Please read these instructions carefully before use and retain them for future reference.

The UltraPro LED light fixture offers flexible lighting solutions with its slim design, flat plug, and linkable capabilities. It features energy-efficient LED technology providing 575 lumens of 2700K warm white light with a High/Low/Off switch for brightness control.

Safety Information

• Ensure the mounting location is dry and capable of supporting the fixture.
• Do not install the LED light fixture while it is plugged into an outlet.
• If you are not comfortable installing the fixture, contact a qualified electrician.
• This product is designed for indoor use only.

Package Contents

The package includes:
A. Light fixture
B. Light mounting screws
C. Power supply cord (5ft)
D. 18-inch linking cord

Text Description: An image showing the UltraPro 18-inch LED light fixture along with its included accessories: mounting screws, a 5-foot power supply cord, and an 18-inch linking cord. Each component is labeled with a letter for easy identification.

Setup and Installation

1. Tools Required:

   • 1/16 inch drill bit (for soft wood)
   • 3/32 inch drill bit (for hard wood)
   • Screwdriver
   • Pair of pliers (optional)

2. Mounting the Fixture:

   Hold the light fixture in the desired mounting location. Use the keyhole tabs on the fixture to mark the locations for the mounting screws. Pre-drill holes at the marked spots using the appropriate drill bit for your cabinet material. Insert the mounting screws, leaving the screw heads protruding about 1/8 inch from the surface. Align the keyhole tabs with the screw heads and slide the fixture into place to secure it. If necessary, tighten the screws further to ensure a snug fit.

   

   Text Description: A close-up image of the UltraPro 18-inch LED light fixture mounted under a cabinet, demonstrating its slim profile and how it integrates into the space.

3. Connecting Power:

   Plug the 3-pin connector end of the power cord into the light fixture. Ensure it is securely connected. Finally, plug the flat plug of the power cord into a standard 120VAC 60Hz electrical outlet. The flat plug design helps save space and allows for flexible placement.

   

   Text Description: A close-up image showing the flat plug of the UltraPro LED light fixture plugged into a standard wall outlet, highlighting its space-saving design.

Installation Video Guide:

Operation

The UltraPro LED light fixture features a High/Low/Off switch for easy control of brightness levels.

1. Turning On/Off and Adjusting Brightness:

   Locate the switch on one end of the light fixture. Slide the switch to the 'I' position for High brightness, 'II' position for Low brightness, or the 'O' position to turn the light Off.

   

   Text Description: A diagram highlighting the High/Off/Low switch and the high-powered LED strip on the UltraPro light fixture, along with its electrical specifications.

2. Linking Multiple Fixtures:

   This fixture is linkable, allowing you to connect up to 30 units for extended lighting coverage. Use the provided 18-inch linking cord to connect additional UltraPro LED light fixtures. Simply plug one end of the linking cord into the output port of the first fixture and the other end into the input port of the next fixture. Ensure all connections are secure. The total wattage of linked fixtures should not exceed the maximum specified limit.

   

   Text Description: An image showing two UltraPro LED light fixtures being connected together using an 18-inch linking cord, demonstrating the product's linkable feature.

Maintenance

To maintain the performance and appearance of your UltraPro LED light fixture, follow these simple guidelines:

• Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
• Bulb Replacement: The LED technology in this fixture is designed for long life, eliminating the need for bulb replacement.
• Inspection: Periodically check the power cord and linking cords for any signs of damage. If any damage is found, discontinue use and contact customer support.

Troubleshooting

Specifications

• Brand: UltraPro
• Model Name: Plug-in Under Counter Light Fixture
• Model Number: 44106
• Size: 18 inch
• Light Source Type: LED
• Light Color: Warm White (2700 Kelvin)
• Brightness: 575 Lumens
• Wattage: 13 watts
• Voltage: 120 Volts
• Power Source: Corded Electric
• Control Method: Button Control (High/Low/Off switch)
• Material: Plastic
• Product Dimensions (Fixture): Approximately 18.0" (45.72 cm) Length x 0.8" (1.9 cm) Width x 2.6" (6.7 cm) Height
• Item Weight: 12.8 ounces (0.36 Kilograms)
• Linkable: Yes, up to 30 fixtures
• Indoor/Outdoor Usage: Indoor
• UPC: 030878441063

Text Description: A diagram illustrating the key dimensions of the UltraPro 18-inch LED light fixture, including its length (18.0 inches / 45.72 cm), width (0.8 inches / 1.9 cm), and height (2.6 inches / 6.7 cm).

Warranty and Support

Warranty: This UltraPro product comes with a limited-lifetime warranty, offering peace of mind regarding its quality and durability.

For further assistance, technical support, or warranty claims, please refer to the contact information provided on the product packaging or visit the official UltraPro website.