LEKATO M01696UK

Download PDF
Contents

LEKATO 9V AC/DC Pedal Power Supply Adapter User Manual

Model: M01696UK

Introduction

Thank you for choosing the LEKATO 9V AC/DC Pedal Power Supply Adapter. This adapter is designed to provide stable and reliable power to most instrument pedals and other 9-volt battery devices, ensuring consistent, battery-free performance. This manual provides essential information for the proper setup, operation, and maintenance of your power supply.

LEKATO 9V AC/DC Pedal Power Supply Adapter, a compact black power brick with a DC barrel connector cable.

Image: The LEKATO 9V AC/DC Pedal Power Supply Adapter.

Key Features

  • Stable Power Conversion: Converts AC wall power to 9-Volt DC, suitable for a wide range of guitar effect pedals and 9-volt devices.
  • Quality Manufacturing: Produced in a state-of-the-art facility, adhering to stringent quality controls for durability and performance.
  • Consistent Performance: Ensures reliable, battery-free operation for your devices.
  • Wide Compatibility: Designed for broad compatibility with various effect pedals. Refer to your device's specifications for exact power requirements.
  • Professional Noise Isolation: Engineered to minimize unwanted noise, providing a clean power source for your audio equipment.
  • Safety Protections: Includes over-charge, short circuit, temperature, over-voltage, over-current, and overload protection for enhanced safety.
LEKATO Pedal Power Supply with icons for various protections like over-charge, short circuit, temperature, over-voltage, over-current, and overload protection.

Image: LEKATO Pedal Power Supply highlighting its multiple safety features.

Setup Instructions

  1. Unpack the Adapter: Carefully remove the LEKATO 9V AC/DC Pedal Power Supply Adapter from its packaging.
  2. Verify Device Compatibility: Before connecting, ensure your device requires a 9V DC power input with a center-negative polarity. The adapter features a 5.5mm*2.1mm barrel connector.
  3. Connect to Device: Insert the barrel connector of the power supply into the DC input jack of your effect pedal or 9-volt device.
  4. Plug into Power Outlet: Plug the AC prongs of the adapter into a standard wall power outlet (100-240V AC, 50/60Hz).
  5. Power On: Once connected, your device should receive power. Observe any indicator lights on your pedal to confirm it is powered on.
Close-up of the power adapter's barrel connector with a diagram showing central negative polarity.

Image: Ensure your device requires central negative polarity (5.5mm*2.1mm barrel connector).

Image showing the extended 5.0 feet cord of the power adapter.

Image: The adapter features an extended 5.0 feet cord for flexible placement.

Operating Instructions

The LEKATO 9V AC/DC Pedal Power Supply Adapter is designed for simple plug-and-play operation. Once connected as per the setup instructions, your compatible device will receive continuous power.

  • Power Output: The adapter provides a stable 9V DC output with 1000mA (1A) current, suitable for devices requiring up to 1A.
  • Input Voltage: Compatible with universal input voltage from 100-240V AC, 50/60Hz, making it suitable for international use with appropriate plug adapters (not included).
  • Noise Reduction: The adapter incorporates professional noise isolation to ensure a clean audio signal from your pedals.
Image showing the power adapter with its output specifications: 9V DC 1000mA and input: 100-240V ~ 50/60Hz, 400mA.

Image: Power Watt Compatibility details for the adapter.

Various guitar pedals from different brands connected in a circle, illustrating wide compatibility.

Image: Wide compatibility with various effect pedals.

Video Demonstration: LEKATO Guitar Looper Pedal Set

Video: This video demonstrates the LEKATO Guitar Looper Pedal Set, which can be powered by this 9V AC/DC adapter. It showcases the pedal's functionality and how it integrates into a guitar setup.

Maintenance

  • Cleaning: Disconnect the adapter from the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
  • Storage: Store the adapter in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
  • Cable Care: Do not bend or crimp the power cord excessively. Avoid placing heavy objects on the cord.
  • Inspection: Periodically inspect the adapter and cable for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use and replace the adapter.

Troubleshooting

ProblemPossible CauseSolution
Device not powering on.
  • Adapter not properly plugged in.
  • Device incompatible with 9V DC or center-negative polarity.
  • Faulty power outlet.
  • Damaged adapter or cable.
  • Ensure adapter is securely plugged into both the device and the wall outlet.
  • Verify your device's power requirements (voltage, current, polarity) match the adapter's specifications.
  • Test the power outlet with another working appliance.
  • Inspect the adapter and cable for damage. Replace if necessary.
Excessive noise or hum.
  • Ground loop interference.
  • Interference from other electronic devices.
  • Faulty cables or connections.
  • Ensure all audio cables are properly shielded and connected.
  • Try plugging the adapter into a different outlet or power strip.
  • Move the adapter away from other electronic devices that may cause interference.
  • Test with different audio cables.
Adapter feels hot.
  • Normal operation (slight warmth).
  • Overload or short circuit.
  • Poor ventilation.
  • A slight warmth is normal.
  • If excessively hot, disconnect immediately. Check for short circuits in your pedal chain or if the device draws more current than the adapter provides (1000mA).
  • Ensure the adapter is in a well-ventilated area.

Specifications

  • Brand: LEKATO
  • Model Name: M01696UK
  • Input: 100-240V AC, 50/60Hz, 400mA
  • Output: 9V DC, 1000mA (1A)
  • Polarity: Center Negative
  • Connector Type: DC Barrel Connector (5.5mm x 2.1mm)
  • Cable Length: Approximately 5.0 feet
  • Special Features: Short Circuit Protection, Over-charge Protection, Temperature Protection, Over-voltage Protection, Over-current Protection, Overload Protection
  • Compatible Devices: Effect Pedals, 9-Volt Battery Devices
  • Material: Plastic Or Metal
  • Item Weight: 2.89 ounces
  • Package Dimensions: 4.02 x 3.07 x 2.6 inches
  • UPC: 793811852394
  • ASIN: B07VXGHRSS

Warranty Information

This product is covered by a standard return policy. For specific warranty details and duration, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.

  • Return Policy Duration: 30 days (refund/replacement)

Customer Support

For any questions, technical assistance, or support regarding your LEKATO Pedal Power Supply Adapter, please contact the seller or LEKATO customer service. You can often find contact information on the product packaging or the seller's storefront.

Seller: WSZCH

Visit the LEKATO Store: LEKATO Store on Amazon

© 2026 LEKATO. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.