1. Introduction
Thank you for choosing the Artist hand Heavy Duty Reclining Barber Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new chair. Please read all instructions carefully before use and retain this manual for future reference.
Figure 1.1: Artist hand Heavy Duty Reclining Barber Chair. This image shows the overall design of the chair, highlighting its robust construction and black PU leather upholstery.
2. Safety Information
To ensure safe operation and prevent injury or damage, observe the following safety guidelines:
- Ensure the chair is placed on a hard, flat, and stable surface to prevent tipping.
- Do not exceed the maximum weight capacity of 440 lbs (200 kg).
- Operate the hydraulic pump and swivel mechanism carefully and smoothly. Avoid sudden movements.
- Follow all assembly instructions precisely to ensure the chair's stability and structural integrity.
- Keep hands and feet clear of moving parts during adjustment.
- Regularly inspect all components for wear, damage, or loose fasteners. Do not use the chair if any part is damaged.
3. Assembly Instructions
The Artist hand Barber Chair is designed for straightforward assembly. The chair is shipped in two separate boxes to ensure safe transport of all components. An instructional manual with detailed steps and diagrams is included in the packaging. Please refer to that manual for specific, step-by-step assembly guidance.
General Assembly Steps:
- Unpack all components and verify against the parts list provided in the included manual.
- Assemble the base and hydraulic pump according to the diagrams.
- Attach the seat and backrest assembly to the hydraulic column.
- Install the armrests, footrest, and headrest.
- Ensure all bolts and fasteners are securely tightened before first use.
Figure 3.1: Artist hand Barber Chair. This image provides a general view of the chair, illustrating the main components that require assembly.
4. Operating Instructions
The Artist hand Barber Chair offers several adjustable features for optimal client comfort and stylist convenience.
4.1. Adjusting Chair Height
To adjust the chair's height, use the hydraulic pump lever located on the side of the chair. Press the lever down to lower the chair. To raise the chair, pump the lever repeatedly until the desired height is reached. The chair height can be adjusted up to 5 inches.
4.2. Reclining the Backrest
The backrest can recline up to 135 degrees. To recline, locate the reclining lever, typically on the side of the seat. Pull the lever and gently push the backrest backward to the desired angle. Release the lever to lock the backrest in position.
Figure 4.1: Chair in reclining position. This image demonstrates the chair's ability to recline, showing the backrest angled backward and the footrest extended.
4.3. Adjusting the Headrest
The headrest is adjustable and can be locked into position. Pull the headrest upwards or push it downwards to achieve the desired height. Ensure it clicks into place to secure it.
Figure 4.2: Adjustable height and headrest. This image illustrates the chair's height adjustment mechanism and the movable headrest for client comfort.
4.4. Swivel Function
The chair features a 360-degree swivel function, allowing for easy positioning of the client. To swivel, simply rotate the chair to the desired direction. Some models may include a locking mechanism for the swivel; consult your specific product manual for details.
Figure 4.3: 360-degree swivel. This image highlights the chair's ability to rotate fully, enabling precise client positioning.
5. Care and Maintenance
Proper care and maintenance will extend the life of your Artist hand Barber Chair.
- Cleaning: Wipe clean with a damp cloth. For PU leather, use a mild soap solution if necessary, then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners that can damage the upholstery or finish.
- Inspection: Regularly check all moving parts, bolts, and connections for tightness. Tighten any loose fasteners.
- Hydraulic System: Keep the hydraulic pump clean and free of debris. If the pump becomes stiff or noisy, consult the troubleshooting section or contact customer support.
- Upholstery: Protect the PU leather from sharp objects, excessive heat, and direct sunlight to prevent cracking or fading.
6. Troubleshooting
If you encounter issues with your Artist hand Barber Chair, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not raise or lower | Hydraulic pump low on fluid or damaged; lever mechanism stuck. | Ensure the lever is fully engaged. If issue persists, contact customer support for hydraulic pump inspection or replacement. |
| Chair is unstable or wobbly | Loose bolts in the base or seat assembly; uneven floor surface. | Check and tighten all assembly bolts. Ensure the chair is on a level surface. |
| Backrest does not recline or lock | Reclining mechanism obstructed or damaged; lever not fully engaged. | Check for obstructions. Ensure the reclining lever is fully operated. If damaged, contact support. |
| Squeaking or grinding noises | Lack of lubrication in moving parts; loose components. | Apply a small amount of silicone-based lubricant to pivot points. Tighten any loose bolts. |
If these solutions do not resolve the issue, please contact Artist hand customer support for further assistance.
7. Product Specifications
Key specifications for the Artist hand Heavy Duty Reclining Barber Chair:
- Product Dimensions (L x W x H): 40.5 x 28.3 x 41.3 inches
- Item Weight: 99.6 pounds
- Maximum Weight Recommendation: 440 pounds
- Reclining Angle: Up to 135 degrees
- Height Adjustment: Up to 5 inches
- Swivel: 360 degrees
- Upholstery Material: PU Leather
- Fill Material: High-density Sponge
- Frame Material: Alloy Steel, Stainless Steel
- Base Diameter: 26.8 inches (electroplated)
- Included Components: Arm Pad, Cushion, Instructional Manual
Figure 7.1: Chair dimensions. This image provides a detailed diagram of the chair's measurements, including height, width, depth, and reclining angles.
Additional Features:
- Adjustable Backrest, Adjustable Headrest, Adjustable Height, Arm Rest, Ergonomic, Footrest, Head support, Big and Tall, Seat Lock, Rust Free, Heavy Duty, Reclining, Rolling, Wide.
- Ergonomically shaped backrest with lumbar support.
- FSC-Certified wood frame.
8. Warranty Information
The Artist hand Heavy Duty Reclining Barber Chair includes a 1-year warranty on the hydraulic pump from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.
9. Customer Support
For any questions, concerns, or assistance with your Artist hand Barber Chair, our friendly support team is ready to assist you promptly. Please have your product model and purchase information available when contacting support.
Contact Information:
- Refer to the contact details provided in your product packaging or on the official Artist hand website.
