EcoSmart B7PR38P120ESD01

EcoSmart PAR38 Dimmable LED Light Bulb Instruction Manual

Model: B7PR38P120ESD01

1. Introduction

Thank you for choosing the EcoSmart PAR38 Dimmable LED Light Bulb. This product is designed to provide energy-efficient, long-lasting illumination for both indoor and outdoor applications. With its dimmable functionality and bright white light, it offers a versatile lighting solution while reducing energy consumption. Please read this manual thoroughly before installation and operation to ensure proper use and maximum lifespan of your LED bulbs.

2. Safety Information

  • WARNING: To avoid electric shock, always turn off the power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
  • Do not use with standard dimmers unless explicitly stated as compatible. Use only with LED-compatible dimmers.
  • This bulb is suitable for use in wet locations and enclosed fixtures.
  • Do not disassemble the bulb. There are no user-serviceable parts inside.
  • Ensure the fixture is rated for the bulb's wattage and size.
  • Avoid direct exposure to water jets or submersion.

3. Package Contents

Your package should contain the following items:

  • 2 x EcoSmart PAR38 Dimmable LED Light Bulbs
EcoSmart PAR38 Dimmable LED Light Bulb packaging showing two bulbs, 120W equivalent, 14.5W actual, bright white, 1200 lumens, 13 years life, Energy Star certified.

The image displays the product packaging for the EcoSmart PAR38 Dimmable LED Light Bulbs. The blue box highlights key features such as '120W Replacement, Uses only 14W+', 'Bright White', '2 Pack - PAR38', 'Dimmable', 'Wet Rated', and 'Energy Star'. It also indicates a lifespan of '13 Years / 15,000 Hours' and a brightness of '1200 lumens'.

4. Setup and Installation

Follow these steps to install your EcoSmart PAR38 LED Light Bulb:

  1. Turn off Power: Before attempting any installation, ensure the power to the light fixture is completely turned off at the circuit breaker or fuse box.
  2. Remove Old Bulb: Carefully unscrew the existing bulb from the fixture. Allow it to cool if it has been recently in use.
  3. Install New Bulb: Screw the EcoSmart PAR38 LED bulb into the E26 base socket. Turn clockwise until it is finger-tight. Do not overtighten.
  4. Restore Power: Once the bulb is securely installed, restore power to the fixture from the circuit breaker or fuse box.
  5. Test: Turn on the light switch to confirm the bulb is functioning correctly.

5. Operating Instructions

Operating your EcoSmart PAR38 LED Light Bulb is straightforward:

  • Standard Operation: Simply use your existing light switch to turn the bulb on or off.
  • Dimmable Functionality: If connected to a compatible LED dimmer switch, you can adjust the brightness level of the bulb. Ensure your dimmer is designed for LED lighting to prevent flickering or damage.

6. Maintenance

The EcoSmart PAR38 LED Light Bulb requires minimal maintenance:

  • Cleaning: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the bulb. Do not use liquid cleaners or abrasive materials.
  • No User-Serviceable Parts: The bulb contains no user-serviceable parts. Do not attempt to open or repair the bulb.

7. Troubleshooting

If you encounter issues with your EcoSmart PAR38 LED Light Bulb, refer to the following common solutions:

  • Bulb Does Not Light:
    • Ensure the power switch is on.
    • Check the circuit breaker or fuse box to ensure power is supplied to the fixture.
    • Confirm the bulb is screwed in securely into the socket.
    • Test the bulb in another working fixture to rule out a faulty bulb or fixture.
  • Bulb Flickers:
    • If using a dimmer, ensure it is an LED-compatible dimmer switch. Older incandescent dimmers may cause flickering.
    • Ensure the bulb is screwed in tightly. A loose connection can cause flickering.
  • Dimming Issues:
    • Verify that your dimmer switch is compatible with LED bulbs.
    • Some LED dimmers have adjustment settings for minimum/maximum brightness; consult your dimmer's manual.

8. Specifications

AttributeValue
BrandEcoSmart
Model NumberB7PR38P120ESD01
Light TypeLED
Wattage (Actual)14.5 Watts
Incandescent Equivalent120 Watts
Bulb Shape SizePAR38
Bulb BaseE26
Light ColorBright White
Color Temperature5000 Kelvin
Brightness1200 Lumens
Voltage120 Volts
Average Life15,000 Hours (approx. 13 years at 3 hrs/day)
Indoor/Outdoor UsageIndoor, Outdoor (Wet Rated)
DimmableYes
Energy Star CertifiedYes
UPC693690564602

9. Warranty and Support

EcoSmart products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty statement provided with your purchase or visit the official EcoSmart website. For technical support or further assistance, please contact EcoSmart customer service directly.

EcoSmart Customer Service: Please refer to the contact information on the product packaging or the EcoSmart official website for the most current support details.

© 2025 EcoSmart. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.