1. Introduction
This manual provides essential information for the proper installation and maintenance of your Fette Filter Vacuum Filter Set. Designed for specific Hoover Upright Vacuum models, these filters are crucial for maintaining your vacuum's performance and ensuring clean air in your home.
This image displays the Fette Filter Vacuum Filter Set, showing the product packaging and the included HEPA and Primary filters.
2. Compatible Models
The Fette Filter Vacuum Filter Set is specifically designed for the following Hoover Upright Vacuum models:
- Hoover Upright Vacuum Model UH72460
- Hoover Upright Vacuum Model UH72465
- Hoover Upright Vacuum Model UH72460CA
- Hoover Upright Vacuum Model UH72460RM
This set includes 2 HEPA Filters (part number 440005516) and 2 Primary Filters (part number 440005515).
The HEPA and Primary filters are shown, confirming their compatibility with specified Hoover Air Lite models.
3. Package Contents
Your Fette Filter Vacuum Filter Set includes:
- 2 x HEPA Filters (Part # 440005516)
- 2 x Primary Filters (Part # 440005515)
A visual representation of two sets of Fette Filter vacuum filters, emphasizing their hypoallergenic properties, reusability, ease of installation, and precise fit.
4. Installation Instructions
Follow these steps to replace the filters in your Hoover Upright Vacuum. Always ensure the vacuum is unplugged before performing any maintenance.
4.1 General Filter Replacement Process
- Power Off: Unplug your Hoover vacuum cleaner from the power outlet.
- Locate Filter Compartment: Refer to your vacuum's user manual to locate the filter compartments for both the HEPA and Primary filters. These are typically found near the dust bin or motor housing.
- Remove Old Filters: Carefully remove the used HEPA and Primary filters. Note their orientation for correct installation of the new filters.
- Insert New Filters: Place the new Fette Filter HEPA (440005516) and Primary (440005515) filters into their respective compartments. Ensure they are seated correctly and securely.
- Close Compartment: Securely close the filter compartment cover.
- Restore Power: Plug your vacuum cleaner back into the power outlet.
This image illustrates the simple process of installing a Fette Filter, showing a hand holding the filter.
4.2 Visual Installation Guide
For a visual demonstration of filter replacement, please refer to the videos below:
This video demonstrates the replacement process for a primary filter compatible with Hoover vacuum cleaners, highlighting key steps for proper installation.
This video provides a visual guide on how to replace vacuum filters in a Hoover Upright Vacuum Cleaner, ensuring correct fit and function.
5. Maintenance
Regular maintenance of your filters ensures optimal performance and extends the lifespan of your vacuum cleaner.
5.1 Cleaning the Filters
Both the HEPA and Primary filters in this set are washable and reusable. Follow these guidelines for cleaning:
- Frequency: It is recommended to clean the filters every 1-3 months, depending on usage and household dust levels.
- Washing: Rinse the filters under cool, running water until the water runs clear. Do not use detergents or hot water.
- Drying: Allow the filters to air dry completely for at least 24 hours before reinstallation. Ensure they are thoroughly dry to prevent mold growth and damage to the vacuum. Do not use a dryer or other heating elements.
This image provides a close-up view of the high-quality pleated and foam filters included in the set.
5.2 Replacement Schedule
While washable, filters have a finite lifespan. It is recommended to replace your Fette Filter Vacuum Filter Set every 6-12 months to maintain peak filtration efficiency and vacuum performance.
An infographic illustrating the various types of particles, such as dust, pollen, and pet dander, that Fette Filter vacuum filters are designed to capture.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Fette Filter |
| Compatible Devices | Hoover Upright Vacuum Models UH72460, UH72465, UH72460CA, UH72460RM |
| HEPA Filter Part Number | 440005516 |
| Primary Filter Part Number | 440005515 |
| Material | HEPA |
| Reusability | Reusable (Washable) |
| Item Weight | 8.8 ounces (approximate for the set) |
| Product Dimensions | 5"L x 5"W x 1.6"H (approximate for individual filters) |
7. Troubleshooting
If you experience issues after replacing your filters, consider the following common solutions:
- Reduced Suction: Ensure both the HEPA and Primary filters are correctly installed and fully dry. A wet filter can restrict airflow. Check for any blockages in the vacuum hose or brush roll.
- Unusual Odor: If a new odor is present, ensure filters were completely dry before reinstallation. If the odor persists, the filters may need another thorough cleaning or replacement.
- Filter Not Fitting: Double-check that you have the correct filter set for your specific Hoover model. Refer to the compatibility section. Ensure no debris is obstructing the filter compartment.
8. Warranty and Support
This Fette Filter product is a compatible replacement part and is not manufactured by Hoover. The Hoover brand names and logos are registered trademarks of their respective owners. Any use of the Hoover brand name or model designation for this product is made solely for purposes of demonstrating compatibility.
For further assistance or inquiries regarding Fette Filter products, please refer to the seller's support channels where the product was purchased.
