1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your SOLLA 100W LED Flood Light, Model YM-002. Please read these instructions thoroughly before installation and retain this manual for future reference.
The SOLLA 100W LED Flood Light is designed for various outdoor and indoor lighting applications, including yards, gardens, garages, rooftops, patios, playgrounds, courts, and parking lots. It features high brightness, energy efficiency, and durable construction.
2. Safety Information
WARNING: To prevent electric shock, fire, or injury, always follow basic safety precautions when installing or servicing this fixture.
- Installation must be performed by a qualified electrician or service person in accordance with national and local electrical codes.
- Ensure the power supply is disconnected before installation, maintenance, or cleaning.
- Do not operate the fixture with a damaged cord or plug.
- Do not modify the fixture. Any modifications may void the warranty and create safety hazards.
- This fixture is designed for hard-wiring. It does not include a plug.
- Avoid direct eye exposure to the light source when the fixture is operating.
- Ensure the mounting surface can support the weight of the fixture.
3. Product Overview
3.1 Key Features
- Long Lifetime: Aluminum alloy housing provides high thermal conductivity, ensuring efficient heat dissipation and a lifespan of over 50,000 hours.
- High Brightness: Delivers 10000 lumens with a luminous efficacy of 100 lm/w, offering significant energy savings compared to traditional lighting.
- Lightning & Water Resistance: IP65 rated for protection against dust and water jets, and includes an SPD (Surge Protective Device) for enhanced protection during thunderstorms.
- Sturdiness & Durability: Constructed with a robust metal bracket and tempered glass, designed for high-temperature resistance (up to 120°C) and anti-aging performance.
- Easy Installation: Features an adjustable bracket for flexible mounting on various surfaces.
3.2 Components
The SOLLA 100W LED Flood Light consists of the following main components:
- LED Light Panel: Contains the high-brightness LED chips.
- Tempered Glass Cover: Protects the LED panel.
- Aluminum Housing: Provides structural integrity and heat dissipation.
- Adjustable Mounting Bracket: Allows for flexible positioning.
- Waterproof Joint and Wiring: For secure electrical connection.
Figure 1: Front view of the SOLLA 100W LED Flood Light, showcasing its rectangular design, LED array, and "SOLLA 100W IP66" branding.
4. Specifications
| Feature | Specification |
|---|---|
| Brand | SOLLA |
| Model Number | YM-002 |
| Wattage | 100 Watts |
| Brightness | 10000 Lumens |
| Light Color | 3000K Warm White |
| Voltage | 110 Volts |
| Material | Aluminum, Tempered Glass |
| Product Dimensions (L x W x H) | 12.6" x 1.73" x 8.03" (32cm x 4.39cm x 20.39cm) |
| Item Weight | 3.69 pounds |
| IP Rating | IP65 (Waterproof) |
| Installation Type | Wall mount, Eave/Soffit mount |
| Indoor/Outdoor Usage | Indoor/Outdoor |
| Light Source Type | LED |
Figure 2: Diagram illustrating the dimensions of the SOLLA 100W LED Flood Light, including length (12.6 inches / 32 cm), width (1.73 inches / 4.39 cm), and height (8.03 inches / 20.39 cm) with the bracket.
5. Installation
Important: Ensure power is OFF at the circuit breaker before beginning installation.
5.1 Mounting Location
Choose a suitable mounting location that provides adequate illumination for the desired area. The adjustable bracket allows for various mounting orientations:
- Wall Mounting: Secure the bracket directly to a wall.
- Floor Mounting: Install the fixture on a flat ground surface.
- Ceiling Mounting: Attach the fixture to an overhead structure or eave/soffit.
Figure 3: Illustration of different mounting options: wall, floor, and ceiling mounting.
5.2 Mounting Steps
- Mark the desired mounting holes on the surface using the fixture's bracket as a template.
- Drill appropriate holes for the mounting screws (not included).
- Secure the mounting bracket to the surface using suitable screws and anchors.
- Attach the flood light fixture to the secured bracket.
- Adjust the angle of the flood light to the desired position and tighten the bracket screws to secure it. The bracket allows for 180-degree adjustment.
Figure 4: An illustration demonstrating the 180-degree adjustable mounting bracket, allowing for flexible positioning and aiming of the flood light.
5.3 Electrical Wiring
This flood light requires hard-wiring to a 110V AC power source. The fixture comes with three wires:
- Black Wire: Live (L)
- White Wire: Neutral (N)
- Green/Yellow Wire: Earth/Ground (E)
Connect these wires to the corresponding wires from your power supply using appropriate waterproof wire connectors. Ensure all connections are secure and insulated.
Figure 5: An illustration detailing the hard-wiring connections (Live, Neutral, Earth wires) and the approximate wire length of 39.37 inches (100 cm).
5.4 Irradiation Distance and Area
Refer to the table below for recommended mounting heights and effective lighting distances/areas for the 100W model.
Figure 6: A table and diagram showing recommended mounting heights, best irradiation distances, and lighting areas for different wattage SOLLA flood lights, specifically highlighting the 100W model's performance.
6. Operation
Once properly installed and wired, the SOLLA 100W LED Flood Light operates by switching on the connected power supply. There are no complex controls on the fixture itself; it functions as a direct on/off light source.
Figure 7: Example of SOLLA LED Flood Lights illuminating a house exterior at night, demonstrating their effective coverage.
7. Maintenance
The SOLLA 100W LED Flood Light is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.
- Cleaning: Periodically clean the tempered glass cover with a soft, damp cloth to remove dirt, dust, or debris that may obstruct light output. Do not use abrasive cleaners or solvents.
- Inspection: Annually inspect the fixture for any signs of damage, loose connections, or wear on the wiring. Ensure the mounting bracket remains securely fastened.
- Heat Dissipation: Ensure that the heat dissipation fins on the back of the fixture are not obstructed by debris or insulation, as this can affect performance and lifespan.
Figure 8: A detailed view of the rear of the flood light, emphasizing the aluminum heat dissipation fins designed to efficiently manage heat and extend the product's lifespan.
8. Troubleshooting
If you encounter issues with your SOLLA 100W LED Flood Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Loose wiring connection; Faulty switch/breaker | Check power supply at the source; Verify all wiring connections are secure; Test the switch or circuit breaker. |
| Light flickers or dims | Unstable power supply; Loose wiring; Overheating | Ensure stable power; Check wiring connections; Ensure adequate ventilation around the fixture. |
| Reduced light output | Dirt or debris on lens; Overheating | Clean the tempered glass cover; Ensure proper heat dissipation. |
| Water ingress | Improper installation of waterproof joint; Damaged housing/seal | Re-check waterproof connections during installation; Inspect for physical damage. If damaged, replace the fixture. |
If the problem persists after attempting these solutions, contact customer support.
9. Warranty and Support
SOLLA products are manufactured to high-quality standards. This product is covered by a standard warranty. Please refer to your purchase documentation or the SOLLA official website for specific warranty terms and conditions.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact SOLLA customer support through the retailer where the product was purchased or via the official SOLLA website.
SOLLA Website: Visit the SOLLA Store on Amazon
