SOLLA YM-002

SOLLA 150W LED Flood Light (Model YM-002) Instruction Manual

15000lm, 3000K Warm White, IP66 Outdoor Security Light

Introduction

Welcome to the SOLLA 150W LED Flood Light. This high-performance lighting fixture is designed for various outdoor and indoor applications, offering 15000 lumens of 3000K warm white light. Please read this manual carefully before installation and use to ensure safe and optimal performance and to familiarize yourself with the product's features and capabilities.

SOLLA 150W LED Flood Light, front view

Image: Front view of the SOLLA 150W LED Flood Light, showcasing its design and LED array.

Setup and Installation

Safety Precautions

  • Ensure the power supply is disconnected at the circuit breaker before attempting any installation, wiring, or maintenance.
  • Installation should be performed by a qualified electrician or a person with sufficient electrical knowledge.
  • Wear appropriate personal protective equipment (PPE) during installation.
  • Do not connect the light to a dimmer switch, as this model is not dimmable.

Wiring Instructions

This flood light requires hard-wiring directly to your electrical system. It does not come with a pre-attached plug. Follow these steps for secure wiring:

  1. Identify the live (usually black or brown), neutral (usually white or blue), and earth (usually green/yellow) wires from your power supply.
  2. Connect the corresponding wires from the flood light to your power supply wires. Ensure all connections are secure and insulated with appropriate wire connectors.
  3. Verify all connections are correct before restoring power.
Wiring diagram and mounting options for SOLLA flood light

Image: Diagram illustrating the wiring connections (live, neutral, earth) and various mounting methods.

Mounting Options

The SOLLA 150W LED Flood Light comes with an adjustable metal bracket, offering versatile installation options:

  • Wall Mounting: Secure the bracket to a sturdy wall surface.
  • Floor Mounting: Install the light on a flat, stable ground surface.
  • Ceiling Mounting: Attach the bracket to an overhead structure or eave/soffit.

Use appropriate screws and anchors (not included) suitable for your mounting surface to ensure a secure installation. The bracket allows for a 180-degree adjustment, enabling you to direct the light precisely where needed.

Multiple mounting examples for SOLLA flood light

Image: Examples of the flood light mounted on a wall, on the ground, and under an eave.

Diagram showing 180-degree adjustable bracket

Image: Illustration of the flood light's bracket, demonstrating its 180-degree angle adjustment capability.

Operating Instructions

The SOLLA 150W LED Flood Light is designed for straightforward operation:

  • Instant On: Once properly installed and connected to a power source, the light will illuminate instantly when power is supplied. There is no warm-up period.
  • Non-Dimmable: This model provides a consistent light output and is not compatible with dimmer switches.
  • Applications: Ideal for illuminating large outdoor areas such as warehouses, yards, patios, parking lots, stadiums, and driveways. The 3000K warm white light offers a bright yet comfortable ambiance.
SOLLA flood light illuminating a large outdoor area at night

Image: The SOLLA flood light effectively illuminating a large outdoor area, demonstrating its wide coverage.

Maintenance

Minimal maintenance is required for the SOLLA 150W LED Flood Light due to its durable design:

  • Cleaning: To maintain optimal light output, periodically clean the tempered glass surface with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish or seals.
  • Durability Features:
    • IP66 Waterproof Rating: The light is protected against dust ingress and powerful water jets, making it suitable for all weather conditions, including rain and snow.
    • Heat Dissipation: The aluminum alloy housing is designed for high thermal conductivity, dissipating over 90% of the heat. This efficient cooling contributes to the light's extended lifespan.
  • Inspection: Regularly inspect the mounting bracket and wiring for any signs of wear, corrosion, or damage. Ensure all screws remain tight.
SOLLA flood light mounted on a wall during rain, highlighting IP66 waterproof feature

Image: The SOLLA flood light shown installed on a building during rainfall, emphasizing its IP66 waterproof and weather-resistant design.

Rear view of SOLLA flood light showing heat dissipation fins

Image: Rear view of the flood light, illustrating the finned design for efficient heat dissipation.

Troubleshooting

If you encounter issues with your SOLLA 150W LED Flood Light, please refer to the following common problems and solutions:

Problem Possible Cause Solution
Light does not turn on. No power supply, incorrect wiring, tripped circuit breaker. Check power source. Verify all wiring connections (live, neutral, earth). Reset the circuit breaker.
Light is dim or flickers. Unstable power supply, loose wiring connections. Ensure a stable power supply. Inspect and secure all wiring connections.
Water observed inside the fixture. Improper installation, damaged seal. Immediately disconnect power. Inspect seals and ensure proper installation. Contact customer support if damage is suspected.

If the problem persists after attempting these solutions, please contact SOLLA customer support for further assistance.

Product Specifications

Feature Detail
Brand SOLLA
Model Number YM-002
Wattage 150 Watts
Brightness 15000 Lumens
Color Temperature 3000K Warm White
Material Aluminum, Tempered Glass
IP Rating IP66 (Dustproof & Waterproof)
Product Dimensions 14.57"L x 9.37"W x 6.5"H (37cm x 23.8cm x 16.5cm)
Item Weight 5.4 Pounds (2.45 kg)
Voltage 110 Volts
Power Source Corded Electric (Hard-wired)
Mounting Type Wall mount, Eave/Soffit mount, Floor mount
Special Features Instant On, Shock and vibration resistant
Lifespan Over 50,000 hours
Dimensional drawing of SOLLA 150W LED Flood Light

Image: Detailed dimensions of the SOLLA 150W LED Flood Light.

Irradiation Distance Table (150W)

The following table provides guidance on suggested mounting heights and effective illumination distances for the 150W model:

Table showing LED flood light irradiation distance for 150W model

Image: Chart detailing recommended mounting height, best irradiation distance, and lighting area for various wattage flood lights, including the 150W model.

Warranty and Support

  • Warranty: The SOLLA 150W LED Flood Light is covered by a 24-month warranty from the date of purchase, protecting against manufacturing defects.
  • Return Policy: A 30-day return policy is available for this product. Please refer to your retailer's specific return guidelines.
  • Customer Support: For technical assistance, warranty claims, or any questions regarding your product, please visit the official SOLLA website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty services.

© 2025 SOLLA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.