ET2 Soji 2-Light LED Linear Pendant Instruction Manual

1. Introduction

Thank you for purchasing the ET2 Soji 2-Light LED Linear Pendant. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

2. Safety Information

• Electrical Safety: All electrical connections must be made in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
• Power Disconnection: Always disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
• Fixture Handling: Handle the fixture with care. Avoid dropping or striking the glass shades.
• Voltage: This fixture is designed for 120 Volts. Ensure your power supply matches this requirement.
• Indoor Use Only: This product is intended for indoor use only. Do not install in wet or damp locations.

3. Package Contents

Verify that all components are present before beginning installation:

• ET2 Soji 2-Light LED Linear Pendant Fixture
• Instruction Manual
• Mounting Hardware

4. Setup and Installation

Professional installation is recommended. Ensure power is disconnected before proceeding.

1. Prepare the Installation Area: Turn off power at the circuit breaker. Clear the area where the pendant will be installed.
2. Mount the Canopy: The pendant includes a canopy with a diameter of 39.5 x 4.75 x 1.75 inches. Secure the mounting hardware to the junction box in the ceiling. This fixture is adaptable for sloped ceilings.
3. Connect Wiring: Follow the wiring diagrams provided in the included instruction manual. Connect the fixture's wires to the corresponding household wires (live, neutral, ground).
4. Attach Fixture to Canopy: Carefully lift the fixture and attach it to the mounted canopy, ensuring all connections are secure.
5. Install Glass Shades: Gently attach the satin white glass shades to the fixture.

5. Operating Instructions

Once installed and power is restored, the ET2 Soji LED Linear Pendant can be controlled via an app or a remote control, depending on your setup. Refer to the specific instructions provided with your smart control system for pairing and operation details.

• Power On/Off: Use the connected wall switch, remote control, or smart app to turn the light fixture on or off.
• Brightness Adjustment: If connected to a compatible dimmer system, adjust brightness using the remote control or app.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your pendant light.

• Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the metal frame and glass shades. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• LEDs: The integrated LED light source has a rated life of 30,000 hours and is not user-replaceable.

7. Troubleshooting

If your pendant light is not functioning correctly, refer to the following common issues and solutions:

8. Specifications

9. Warranty and Support

The ET2 Soji 2-Light LED Linear Pendant comes with a 2-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

For warranty claims or technical support, please contact ET2 customer service. Keep your proof of purchase for warranty validation.