1. Introduction
This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your LEDVANCE Endura Flood 100W LED Floodlight. Please read this manual thoroughly before installation and retain it for future reference.
The LEDVANCE Endura Flood is designed for outdoor use, providing powerful and energy-efficient illumination. Its robust construction ensures durability in various weather conditions.
2. Safety Information
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation, maintenance, or repair.
- Voltage: This product operates on 220-240 V. Verify your power supply matches this requirement.
- IP65 Rating: The floodlight is rated IP65, indicating protection against dust ingress and low-pressure water jets from any direction. While suitable for outdoor use, avoid submerging the unit.
- Heat: The LED floodlight may become warm during operation. Do not touch the light surface directly when in use.
- Light Source: Do not stare directly into the LED light source when it is illuminated, as this may cause eye strain or damage.
3. Package Contents
Carefully unpack the box and ensure all items are present and undamaged. If any components are missing or damaged, contact your supplier immediately.
- 1 x LEDVANCE Endura Flood 100W LED Floodlight (Cool White)
Image: The LEDVANCE Endura Flood 100W LED Floodlight shown in its retail packaging, highlighting key features and specifications on the box.
4. Setup and Installation
The LEDVANCE Endura Flood is designed for wall mounting. Follow these steps for proper installation:
4.1 Pre-Installation Checks
- Ensure the mounting surface is structurally sound and can support the weight of the floodlight.
- Verify the power supply is turned off at the circuit breaker before beginning any electrical work.
- Confirm the floodlight's dimensions are suitable for your intended installation location.
Image: A technical drawing illustrating the dimensions of the LEDVANCE Endura Floodlight. The width is 306mm, height is 356mm, and depth is 70mm.
4.2 Mounting the Floodlight
- Position the mounting bracket against the wall at the desired location.
- Mark the drilling points for the mounting screws.
- Drill holes and insert appropriate wall anchors if necessary.
- Secure the mounting bracket to the wall using suitable screws.
- Attach the floodlight to the mounting bracket and adjust the angle as needed.
4.3 Electrical Connection
The floodlight comes with a 1-meter connection cable. Wiring is required to connect it to your main power supply.
- Connect the floodlight's cable to your electrical circuit using a suitable, weather-resistant junction box (not included) if installed outdoors.
- Ensure all connections are secure and properly insulated to prevent short circuits and moisture ingress.
- Adhere to the wiring color codes: Live (Brown), Neutral (Blue), Earth (Green/Yellow).
Image: A close-up view of the LEDVANCE Endura Flood 100W LED Floodlight, showcasing its dark grey aluminum housing and tempered glass cover with visible LED chips.
5. Operating Instructions
Once properly installed and wired, the LEDVANCE Endura Floodlight operates via an external power switch or control system to which it is connected.
- Turning On/Off: Activate the external switch connected to the floodlight's power supply to turn the light on or off.
- Adjusting Angle: The floodlight's angle can be adjusted by loosening the screws on the mounting bracket, tilting the unit to the desired position, and then securely tightening the screws.
Image: The LEDVANCE Endura Flood 100W LED Floodlight installed above a garage door, illuminating the driveway and surrounding area at dusk, demonstrating its outdoor application.
6. Maintenance
The LEDVANCE Endura Floodlight requires minimal maintenance. Regular cleaning and inspection will ensure optimal performance and longevity.
- Cleaning: Periodically clean the tempered glass cover and aluminum housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or glass. Ensure the power is off before cleaning.
- Inspection: Annually inspect the cable and connections for any signs of wear, damage, or corrosion. Ensure all mounting screws remain tight.
- LEDs: The LED light source is integrated and not user-replaceable. If the LEDs fail, the entire unit should be replaced.
7. Troubleshooting
If you encounter issues with your floodlight, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Floodlight does not turn on. | No power supply; loose wiring; faulty external switch. | Check circuit breaker. Verify all electrical connections are secure. Test the external switch. Consult a qualified electrician if necessary. |
| Light output is dim or flickers. | Unstable power supply; damaged internal components. | Ensure stable power supply. If the problem persists, the unit may be faulty and require replacement. |
| Water inside the unit. | Improper installation; damaged seal. | Immediately disconnect power. Inspect for damage. If seals are compromised, the unit's IP rating is compromised and it should be replaced. |
For issues not listed here or if troubleshooting steps do not resolve the problem, contact LEDVANCE customer support or a qualified electrician.
8. Specifications
Key technical specifications for the LEDVANCE Endura Flood 100W LED Floodlight:
- Brand: LEDVANCE
- Model Number: 4058075206809
- Wattage: 100 Watts
- Voltage: 230 Volts (220-240 V)
- Light Color: Cool White (4000 K)
- Brightness: 8800 Lumen
- Beam Angle: 120°
- Body Material: Die-cast Aluminum
- Shade Material: Tempered Glass
- Protection Rating: IP65
- Indoor/Outdoor Usage: Outdoor
- Installation Type: Wall Mount
- Product Dimensions (L x W x H): 14.02" x 12.05" x 2.76" (356mm x 306mm x 70mm)
- Item Weight: 8.99 pounds
- Connection Cable Length: 1 meter (wiring required)
- Energy Efficiency: A++
9. Warranty and Support
For warranty information, technical support, or further inquiries regarding your LEDVANCE Endura Floodlight, please refer to the official LEDVANCE website or contact their customer service department.
You can visit the official LEDVANCE store for more product information and support: LEDVANCE Store
