RFIVER DS2001 TV Tripod Stand Instruction Manual

Introduction

Thank you for choosing the RFIVER DS2001 TV Tripod Stand. This manual provides detailed instructions for the safe and proper assembly, operation, and maintenance of your new TV stand. Please read this manual thoroughly before installation and keep it for future reference.

This stand is designed to securely hold flat-screen televisions ranging from 32 to 70 inches, with a maximum weight capacity of 45 kg (100 lbs). It features adjustable height, swivel, and tilt functions for optimal viewing flexibility.

Safety Information

• Weight Capacity: Do not exceed the maximum load capacity of 45 kg (100 lbs). Overloading can result in serious injury or property damage.
• TV Size: Ensure your TV's screen size is within the recommended range of 32-70 inches.
• VESA Compatibility: Verify your TV's VESA mounting pattern is compatible with the stand (100x100mm to 600x400mm).
• Assembly: Assemble the stand exactly as instructed. Incorrect assembly can lead to instability.
• Stability: Always ensure the tripod legs are fully extended and stable on a flat, level surface before mounting the TV.
• Children: Keep children away from the stand during assembly and operation. Do not allow children to climb on or play with the stand.
• Moving the Stand: When moving the stand with a TV mounted, do so carefully and slowly, preferably with assistance.

Package Contents

Please check that all parts are present and undamaged before beginning assembly. If any parts are missing or damaged, contact customer service.

• Tripod Base Assembly
• TV Mounting Plate
• Vertical Support Pole
• TV Brackets (2 pieces)
• Hardware Kit (various screws, washers, spacers for TV mounting)
• Instruction Manual

Setup and Assembly Instructions

Follow these steps carefully to assemble your RFIVER DS2001 TV Tripod Stand.

Step 1: Assemble the Tripod Base

Unfold the tripod legs and ensure they are fully extended and locked into position. The base should be stable on a flat surface.

This diagram illustrates the overall dimensions of the TV tripod stand. The height is adjustable from 1300mm to 1900mm. The maximum width for TV mounting is 660mm, and the tripod base extends up to 1000mm. The stand supports a maximum weight of 45 kg (100 lbs).

Step 2: Attach TV Brackets to your TV

Identify the correct screws and spacers from the hardware kit that fit your TV's VESA mounting holes. Attach the two TV brackets to the back of your television. Ensure they are securely fastened and level.

This diagram details VESA compatibility patterns (100x100mm to 600x400mm) and the various screws and spacers included to fit different TV models. Please measure your TV's VESA pattern before assembly.

Step 3: Mount TV to the Stand

Carefully lift the TV (with assistance if necessary) and hook the TV brackets onto the mounting plate of the tripod stand. Ensure the brackets are properly seated and engage the safety lock mechanism to prevent accidental dislodgement.

Key features of the stand include a safety lock mechanism to prevent the TV from dropping, an integrated bubble level for horizontal alignment, and non-slip feet to protect floors and ensure stability.

Step 4: Cable Management

Route your TV cables neatly along the central pole using the integrated cable management system. This helps maintain a clean and organized appearance.

The stand features a cable management system along the central pole to keep wires organized and out of sight, contributing to a tidy setup.

Operating Instructions

Height Adjustment

To adjust the height of your TV, loosen the locking knob on the central pole. Carefully raise or lower the TV to your desired viewing height (between 1300mm and 1900mm). Once the desired height is reached, securely tighten the locking knob to prevent movement.

The stand's height can be adjusted from a minimum of 1300mm to a maximum of 1900mm, allowing for optimal viewing angles in various settings.

Swivel and Tilt Function

The TV mount allows for flexible viewing angles. You can swivel the TV up to 30 degrees left or right. Additionally, the TV can be tilted up or down by 15 degrees. Gently adjust the TV to your preferred angle. Ensure any locking mechanisms for tilt are secured after adjustment.

The TV mount allows for a 60-degree swivel (30 degrees left and 30 degrees right) and a 15-degree tilt (up and down) to achieve the desired viewing angle.

Maintenance

• Cleaning: Wipe the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the finish.
• Periodic Checks: Regularly check all screws and connections to ensure they remain tight and secure.
• Damage: If any part of the stand becomes damaged, discontinue use immediately and contact customer service for replacement parts or advice.

Troubleshooting

• Stand is Unstable: Ensure all tripod legs are fully extended and locked. Check that the stand is on a flat, level surface. Verify all assembly screws are tightened.
• TV is Not Level: Use the integrated bubble level to ensure the TV is horizontal. Adjust the TV brackets or the stand's height as needed.
• TV Does Not Fit: Double-check your TV's VESA mounting pattern and weight against the stand's specifications. Ensure you are using the correct screws and spacers.
• Difficulty Adjusting Height/Swivel: Loosen the respective locking knobs before attempting to adjust. Do not force adjustments.

Specifications

Warranty and Support

The RFIVER DS2001 TV Tripod Stand comes with a 5-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.

For any questions, concerns, or assistance with assembly or operation, please contact RFIVER customer service. Our team is dedicated to providing support and ensuring your satisfaction.

You can visit the official RFIVER store for more information and contact options: RFIVER Store