Introduction
The Master & Dynamic MW07 Plus True Wireless Earphones represent the second generation of the MW07 series, designed for an exceptional audio experience. These earphones feature a handcrafted acetate body and a stainless steel charging case, combining durable materials with advanced technology. Key functionalities include extended battery life, Bluetooth 5.0 connectivity, Active Noise-Cancelling, and an Ambient Listening Mode, providing a versatile and high-quality listening solution.
This manual provides essential information for setting up, operating, maintaining, and troubleshooting your MW07 Plus earphones.
What's in the Box
- MW07 Plus True Wireless Earphones (Left and Right)
- Stainless Steel Charging Case
- USB-C to USB-C Charging Cable
- USB-C to USB-A Adapter
- Protective Canvas Pouch
- 5 Pairs of Silicone Ear Tips (XS, S, M, L, XL)
- 3 Pairs of Fit Wings (S, M, L)

Setup
1. Charging
Before first use, fully charge your MW07 Plus earphones and the charging case. Use the provided USB-C cable to connect the charging case to a power source. The earphones charge inside the case.
- Earphone Battery Life: Up to 10 hours on a single charge.
- Total Playtime with Case: Up to 40 hours (additional 3 charges from the case).
- Charging Time: Approximately 1.5 hours for earphones and case.

2. Fitting
Select the ear tips and fit wings that provide the most secure and comfortable fit for your ears. A proper seal is crucial for optimal sound quality and noise cancellation.

3. Pairing
- Remove both earphones from the charging case. They will automatically enter pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and select "M&D MW07 PLUS" from the list of available devices.
- If prompted, confirm the pairing. The earphones will indicate successful connection.

Operating Instructions
Earphone Controls
The MW07 Plus earphones feature intuitive physical buttons for control. Refer to the diagram below for button locations and functions.

| Button/Action | Function |
|---|---|
| Left Earphone: Vol+ / Vol- |
|
| Right Earphone: Multi-function Button |
|
Active Noise-Cancelling (ANC) and Ambient Listening Mode
The MW07 Plus features two distinct listening modes:
- Active Noise-Cancelling (ANC): Reduces external ambient noise, ideal for focused listening in noisy environments. Activate/deactivate by long-pressing the Vol- button on the left earphone.
- Ambient Listening Mode: Allows you to hear your surroundings while listening to audio, enhancing awareness. Activate/deactivate by long-pressing the Vol+ button on the left earphone.
Maintenance
Proper care ensures the longevity and performance of your MW07 Plus earphones.
- Cleaning: Regularly wipe the earphones and charging case with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.
- Ear Tips: Remove ear tips and clean them with mild soap and water if necessary. Ensure they are completely dry before reattaching.
- Storage: Always store the earphones in their charging case when not in use to protect them and keep them charged.
- Water Resistance: The earphones have an IPX5 water resistance rating, meaning they can withstand light splashes and sweat. Do not submerge them in water.
Troubleshooting
If you encounter issues with your MW07 Plus earphones, try the following solutions:
- No Sound / Connectivity Issues:
- Ensure both earphones are fully charged.
- Place both earphones back into the charging case, close the lid, wait a few seconds, then remove them to re-establish connection.
- Check your device's Bluetooth settings to ensure "M&D MW07 PLUS" is selected and connected.
- Try forgetting the device in your Bluetooth settings and re-pairing.
- One Earphone Not Working:
- Ensure both earphones are charged.
- Place both earphones in the case, close the lid, and then remove them. This often re-syncs them.
- Perform a factory reset (refer to the diagram or manufacturer's website for specific steps if needed, as the provided diagram is in Japanese and not fully clear on factory reset).
- Poor Sound Quality / Lack of Bass:
- Ensure you have a proper seal with the ear tips. Try different sizes of ear tips and fit wings to find the best fit.
- Clean any debris from the ear tips or earphone nozzles.

Specifications
| Feature | Detail |
|---|---|
| Model Name | MW07 PLUS |
| Connectivity Technology | Wireless (Bluetooth 5.0) |
| Bluetooth Range | 30 Meters (100 feet) |
| Audio Driver Type | Dynamic Driver |
| Audio Driver Size | 10 Millimeters |
| Frequency Range | 20 Hz - 20,000 Hz |
| Battery Life (Earphones) | 10 Hours |
| Total Battery Life (with Case) | Up to 40 Hours |
| Charging Time | 1.5 Hours (Earphones & Case) |
| Water Resistance Level | IPX5 (Water Resistant) |
| Noise Control | Active Noise Cancellation |
| Material | Handcrafted Acetate (Earphones), Stainless Steel (Case) |
| Item Weight | 9 Grams (each earphone) |
| Case Weight | 9 Grams |
| Compatible Devices | Cellphones, Desktops, Laptops, Tablets |
Official Product Video
This video provides a brief overview of the Master & Dynamic MW07 Plus True Wireless Earphones, highlighting key features such as sound quality, design, and battery life.
Warranty and Support
For warranty information, technical support, or further assistance, please visit the official Master & Dynamic website or contact their customer service directly.
You can also visit the MASTER & DYNAMIC Store on Amazon for more product information and resources.





