1. Product Overview
The Xigmatek Venom X RGB is an ATX mid-tower PC case designed for high-performance gaming and workstation builds. It features tempered glass panels for showcasing internal components and integrated RGB lighting for customizable aesthetics. This manual provides instructions for assembly, operation, and maintenance of your PC case.
Figure 1: Internal view of the Xigmatek Venom X RGB PC case, highlighting the spacious interior, motherboard mounting area, and drive bays. RGB fans are visible at the front and rear.
2. Safety Information
Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in personal injury or damage to the product.
- Always disconnect the power supply from the wall outlet before performing any installation or maintenance.
- Avoid exposing the case to moisture or extreme temperatures.
- Handle tempered glass panels with care to prevent breakage.
- Ensure proper grounding to prevent electrical shock.
- Keep small components and screws away from children.
- Use appropriate tools for installation to avoid damaging components.
3. Package Contents
Verify that all components listed below are present in your package:
- Xigmatek Venom X RGB ATX Mid-Tower PC Case
- Accessory box (screws, standoffs, cable ties)
- User Manual (this document)
4. Setup and Installation
Follow these steps to assemble your PC system within the Xigmatek Venom X RGB case.
4.1 Removing Side Panels
Carefully unscrew the thumbscrews on the rear of the case to remove the tempered glass side panel and the steel side panel. Place them on a soft, flat surface to prevent scratches.
4.2 Motherboard Installation
- Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (Extended ATX, ATX, Micro-ATX, Mini-ITX).
- Place your motherboard onto the standoffs, aligning the screw holes.
- Secure the motherboard with the provided screws.
4.3 Power Supply Unit (PSU) Installation
- Position the PSU in the dedicated compartment at the bottom rear of the case.
- Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards.
- Secure the PSU to the case with the provided screws from the rear.
Figure 2: Rear view of the Xigmatek Venom X RGB case, illustrating the power supply mounting bracket at the bottom, seven expansion slots, and the exhaust fan area.
4.4 Storage Drive Installation (HDD/SSD)
The case supports multiple storage drives. Refer to the internal layout for specific drive bay locations.
- 3.5" HDDs: Install into the drive cages located beneath the PSU shroud.
- 2.5" SSDs: Mount onto the dedicated SSD trays behind the motherboard tray or within the drive cages.
Figure 3: Internal view from the right side of the Xigmatek Venom X RGB case, revealing ample space for cable management and dedicated mounting points for 2.5-inch SSDs behind the motherboard tray.
4.5 Graphics Card and Expansion Card Installation
- Remove the necessary expansion slot covers from the rear of the case.
- Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
- Secure the cards with screws.
4.6 Front Panel I/O and RGB Connections
Connect the front panel cables (USB, audio, power, reset, LED) to the corresponding headers on your motherboard. Connect the RGB fan cables to the integrated RGB controller or directly to your motherboard's RGB header if supported.
5. Operating Instructions
5.1 Powering On
After all components are installed and cables are connected, plug the power cable into the PSU and a wall outlet. Press the power button on the front panel to start your system.
5.2 RGB Lighting Control
The Xigmatek Venom X RGB case features integrated RGB lighting. Control methods may vary:
- Front Panel Button: If available, a dedicated button on the front I/O panel can cycle through various RGB modes and colors.
- Motherboard Software: If the RGB controller is connected to a compatible motherboard header, you can control lighting effects via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion).
6. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your PC components.
6.1 Cleaning Dust Filters
The Xigmatek Venom X RGB case includes removable dust filters to prevent dust buildup. Regularly clean these filters to maintain airflow.
- Locate the dust filters (e.g., top, front, bottom).
- Gently remove the filters.
- Clean them with a soft brush or rinse with water (ensure they are completely dry before reinstallation).
- Reattach the filters.
Figure 4: Top view of the Xigmatek Venom X RGB case, demonstrating the removable magnetic dust filter for easy cleaning and improved airflow maintenance.
6.2 Cleaning Interior
Periodically clean the interior of the case to remove accumulated dust from components.
- Disconnect power before cleaning.
- Use compressed air to blow dust out of fans, heatsinks, and other components.
- Wipe down interior surfaces with a microfiber cloth.
7. Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| System does not power on. | Loose power connections, faulty PSU, incorrect front panel wiring. | Check all power cables (PSU to wall, PSU to motherboard/components). Verify front panel power switch connection to motherboard. Test PSU if possible. |
| RGB lighting not working. | Loose RGB connections, incompatible motherboard header, software issue. | Ensure RGB cables are securely connected to the controller or motherboard. Check motherboard's RGB header compatibility. Update or reinstall RGB control software. |
| Poor airflow/overheating. | Dust buildup, incorrect fan orientation, insufficient fans. | Clean dust filters and interior. Ensure fans are oriented correctly (intake/exhaust). Consider adding more fans if temperatures remain high. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | Venom X |
| Model Number | EN41756 |
| Case Type | Mid-Tower |
| Motherboard Compatibility | Extended ATX, ATX, Micro-ATX, Mini-ITX |
| Material | Alloy Steel, Tempered Glass |
| Color | Black |
| Expansion Slots | 7 |
| Internal Drive Bays | 5 (combination of 3.5" HDD and 2.5" SSD) |
| Front I/O Ports | 2 x USB 3.0, Audio In/Out, Power Button, Reset Button, RGB Control Button (if applicable) |
| Cooling Method | Air Cooling (supports 120mm fans) |
| PSU Mounting | Rear, Bottom |
| Product Features | RGB Lighting, Tempered Glass Panels, Removable Dust Filters |
| Item Weight | 7.7 Kilograms |
9. Warranty Information
The Xigmatek Venom X RGB PC Case comes with a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair.
Please retain your proof of purchase for warranty claims.
10. Customer Support
For technical assistance, warranty claims, or further inquiries, please contact Xigmatek customer support through their official website or the retailer where the product was purchased.
Official Xigmatek Website: www.xigmatek.com