1. Introduction
Welcome to your new FILA Digital Quartz Watch. This timepiece combines a modern digital display with durable construction, designed for everyday use. Please read this manual thoroughly to understand its features and ensure optimal performance and longevity.
2. Product Overview
2.1. Components
- Digital Display: Shows time, date, and other functions.
- Case: Durable black ABS material.
- Strap: Comfortable and resilient black silicone strap.
- Buttons: Control various watch functions (typically Mode, Adjust, Light, Start/Stop). Specific functions are detailed in the Operating Instructions.
2.2. Key Features
- Digital Time Display
- EL Backlight for enhanced visibility in low-light conditions
- 5 ATM Water Resistance (suitable for showering and shallow swimming)
- World Time Function with 25 pre-programmed city codes
- Durable ABS Case and Silicone Strap
- Mineral Crystal Glass for display protection


3. Setup
3.1. Battery Activation
Your FILA Digital Quartz Watch comes with one LR44 battery pre-installed. If the display is not active upon unboxing, check for a small plastic tab protruding from the side of the watch or near a button. Gently pull and remove this tab to activate the battery. If no tab is present and the display is blank, the battery may require replacement (see Section 5.2).
3.2. Initial Power On
Once the battery is activated, the digital display should illuminate. If the display is in a power-saving mode, press any button to activate it and view the current time/date.
4. Operating Instructions
The FILA Digital Quartz Watch typically features multiple buttons for navigation and setting. While specific button labels may vary, their general functions are as follows:
- Mode Button: Used to cycle through different display modes such as Time, Date, Alarm, Stopwatch, and World Time.
- Adjust Button: Used to select specific digits or settings within a mode that you wish to change.
- Light Button: Activates the EL backlight for temporary illumination of the display.
- Start/Stop Button: Used to increment values during setting, start/stop the stopwatch, or confirm selections.
4.1. Setting Time and Date
- From the normal time display, press the Mode button repeatedly until you enter the Time Setting Mode (often indicated by a flashing digit).
- Use the Adjust button to move the flashing selection between hours, minutes, seconds, year, month, and day.
- While a digit is flashing, use the Start/Stop button to increment the value. Hold the button to rapidly advance.
- Once all settings are correct, press the Mode button again to exit the setting mode and return to the normal time display.
4.2. Using the EL Backlight
To illuminate the display in low-light conditions, press the dedicated Light button. The backlight will typically stay on for a few seconds before automatically turning off.
4.3. World Time Function
- Press the Mode button until you reach the World Time display mode.
- Use the Adjust or Start/Stop button to cycle through the 25 pre-programmed city codes. The watch will display the current time for the selected city.
- Press the Mode button to exit World Time mode.
4.4. Water Resistance Guidelines (5 ATM)
Your FILA Digital Quartz Watch is rated for 5 ATM (50 meters) water resistance. This means it is suitable for:
- Splashes and rain
- Showering
- Shallow swimming
Important:
- Do not press any buttons while the watch is submerged in water.
- Not suitable for diving, snorkeling, or high-pressure water activities (e.g., jet skiing).
- Avoid exposing the watch to hot water or steam, as this can compromise the water-resistant seals.

5. Maintenance
5.1. Cleaning
To keep your watch in optimal condition, regularly wipe the case and strap with a soft, slightly damp cloth. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's materials and finish.
5.2. Battery Replacement
The watch uses one LR44 battery. When the display dims, flickers, or stops functioning, it indicates that the battery needs to be replaced. It is highly recommended to have battery replacement performed by a qualified watch technician. This ensures that the watch's water resistance seals are properly re-seated and maintained after the battery compartment is opened.
5.3. Storage
When not in use, store your watch in a cool, dry place, away from direct sunlight, extreme temperatures, and strong magnetic fields. Prolonged exposure to these conditions can affect the watch's performance and battery life.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Depleted battery or battery activation tab still present. | Remove any battery activation tab. If issue persists, replace the LR44 battery (refer to Section 5.2). |
| Time is inaccurate or stops. | Low battery or incorrect time setting. | Replace the battery. Re-set the time and date (refer to Section 4.1). |
| Buttons are unresponsive. | Watch may be wet or internal malfunction. | Ensure the watch is dry. If the problem continues, contact customer support. |
| Backlight not working. | Low battery or backlight component issue. | Replace the battery. If the issue persists, contact customer support. |
7. Specifications
- Model: FILA 38-105-006
- Case Material: ABS (Acrylonitrile Butadiene Styrene)
- Strap Material: Silicone
- Crystal Material: Mineral Glass
- Water Resistance: 5 ATM (50 meters)
- Case Diameter: Approximately 36 mm
- Case Thickness: 10 mm
- Strap Width: Approximately 20 mm
- Total Length (Watch + Strap): Approximately 24 cm
- Battery Type: 1 x LR44 (included)
- Weight: 100 g
8. Warranty and Support
8.1. Warranty Information
This FILA Digital Quartz Watch is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card or documentation included with your original purchase for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.
8.2. Customer Support
For further assistance, technical support, or service inquiries not covered in this manual, please contact your authorized retailer or visit the official FILA website for customer service contact information.





