EGLO 203387A

EGLO Barbotto 203387A LED Table Lamp User Manual

Model: 203387A

Introduction

Thank you for purchasing the EGLO Barbotto 203387A LED Table Lamp. This manual provides essential information for the safe and efficient use of your new lighting fixture. Please read these instructions carefully before assembly and operation, and retain them for future reference.

The EGLO Barbotto 203387A is a modern LED table lamp featuring a matte black exterior finish with a silver interior, designed to provide ambient lighting for indoor spaces such as living rooms, bedrooms, dorms, and offices.

Safety Instructions

Always follow basic safety precautions when using electrical products to reduce the risk of fire, electric shock, and personal injury.

  • Indoor Use Only: This lamp is designed for indoor, dry locations. Do not use it in wet or damp environments.
  • Electrical Connection: Ensure the power outlet matches the lamp's voltage (120 Volts). Always plug the lamp into a properly grounded outlet.
  • Power Cord: Do not place the power cord near heat sources. Do not operate the lamp with a damaged cord or plug.
  • Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth. Do not use liquid or abrasive cleaners.
  • Bulb Replacement: This lamp uses integrated LED lighting. Do not attempt to replace the LED light source yourself. Contact qualified personnel for service.
  • Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

Package Contents

Verify that all components are present before beginning assembly.

  • 1 x EGLO Barbotto 203387A LED Table Lamp Unit
  • 1 x Power Cord with In-Line Switch (attached)
  • 1 x User Manual (this document)

Setup and Assembly

Assembly is required for this product. Follow these steps to set up your lamp:

  1. Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, flat, and soft surface to prevent scratches.
  2. Base Assembly (if separate): If the lamp base is separate from the main body, securely attach it according to the included diagrams (if any). Ensure all connections are tight.
  3. Positioning: Place the lamp on a stable, flat surface in your desired indoor location. Ensure it is away from water sources and excessive heat.
  4. Power Connection: Plug the lamp's power cord into a standard 120V AC wall outlet. The plug format is A-US style.
EGLO Barbotto 203387A LED Table Lamp placed on a modern desk with light wood paneling in the background.

Image: The EGLO Barbotto 203387A LED Table Lamp positioned on a desk, illustrating typical placement.

EGLO Barbotto 203387A LED Table Lamp on a bedside table next to a bed with white bedding.

Image: The EGLO Barbotto 203387A LED Table Lamp on a bedside table, demonstrating its use in a bedroom setting.

Operating Instructions

The EGLO Barbotto 203387A LED Table Lamp is simple to operate.

  1. Power On/Off: Locate the in-line switch on the power cord. Press the switch to turn the lamp ON or OFF.
  2. Non-Dimmable: This lamp is non-dimmable. It operates at a single brightness level when turned on.
  3. Light Output: The lamp provides an up/down light effect, illuminating both upwards and downwards from its cylindrical design.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your lamp.

  • Cleaning: Before cleaning, always unplug the lamp from the power outlet. Use a soft, dry, lint-free cloth to wipe the exterior surfaces. Do not use harsh chemicals, abrasive cleaners, or sprays, as these can damage the finish or electrical components.
  • Inspection: Periodically inspect the power cord and plug for any signs of damage. If damage is found, discontinue use and contact customer support.
  • LED Light Source: The LED light source is integrated and not user-replaceable. Do not attempt to open the lamp housing.

Troubleshooting

If you encounter issues with your lamp, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Lamp does not turn on.No power to the outlet.
Lamp not plugged in correctly.
In-line switch is off.
Damaged power cord or internal wiring.
Check if the outlet is working by plugging in another device.
Ensure the plug is fully inserted into the outlet.
Press the in-line switch to the 'ON' position.
If cord is damaged, discontinue use and contact support.
Light flickers.Loose connection.
Power fluctuations.
Ensure the plug is securely seated in the outlet.
Try plugging the lamp into a different outlet.
Lamp is hot to the touch.Normal operation (LEDs generate some heat).
Poor ventilation.
Ensure the lamp is placed in an area with adequate air circulation. If excessively hot, unplug and contact support.

If these solutions do not resolve the issue, please contact EGLO customer support for further assistance.

Specifications

Detailed technical specifications for the EGLO Barbotto 203387A LED Table Lamp:

Diagram showing the dimensions of the EGLO Barbotto 203387A LED Table Lamp, with a height of 15.5 inches and a length/diameter of 3.94 inches.

Image: Dimensional diagram of the EGLO Barbotto 203387A LED Table Lamp.

Model Name203387A
BrandEGLO
Product Dimensions4"D x 4"W x 16"H (15.5-Inch Height)
Item Weight2.58 Pounds
Lamp TypeTable Lamp
Light Source TypeLED (Integrated)
Wattage10 watts
Voltage120 Volts
Power SourceCorded Electric
Switch TypeIn-Line Switch
DimmableNo
Shade ColorBlack (exterior), Silver (interior)
MaterialAlloy Steel, Glass (shade)
Indoor/Outdoor UsageIndoor Only
Assembly RequiredYes
Plug FormatA- US style

Warranty

The EGLO Barbotto 203387A LED Table Lamp comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.

Please retain your proof of purchase for warranty claims.

Support and Contact Information

For technical assistance, warranty claims, or any questions regarding your EGLO Barbotto 203387A LED Table Lamp, please contact EGLO customer support:

  • Website: Visit the official EGLO website for support resources and contact details.
  • Customer Service: Refer to the contact information provided on your product packaging or the EGLO website.

When contacting support, please have your model number (203387A) and proof of purchase readily available.

Related Documents - 203387A

PreviewEGLO CUITE 390063A/390064A Table Lamp Instructions
Official assembly and usage instructions for the EGLO CUITE table lamp, models 390063A and 390064A. Learn how to install the bulb, attach the shade, and connect the power.
PreviewEGLO BASIC Desk Lamp - Bulb Replacement and Safety Guide
Instructions for replacing the light bulb in an EGLO BASIC desk lamp, including safety precautions and usage information. Features E27 bulb compatibility and safety class II.
PreviewEGLO LARA Table Lamp - User Guide and Specifications
Get detailed instructions and specifications for the EGLO LARA table lamp (models 205275N, 205276N, 205277N). Learn how to install the bulb, connect power, use the ON/OFF switch, and utilize the 5V 1A output for charging.
PreviewEGLO COGNOLI 97914A/97915A LED Desk Lamp: Instructions and Features
Comprehensive guide for the EGLO COGNOLI 97914A/97915A LED desk lamp, covering setup, touch controls, display functions, clock, alarm, snooze settings, and FCC compliance information.
PreviewEGLO CONTESSORE 39917A Table Lamp Assembly Instructions
Concise assembly instructions and product overview for the EGLO CONTESSORE 39917A table lamp. Includes step-by-step guidance and important notes.
PreviewEGLO CAHUAMA Lamp (99824A/99825A) Assembly Instructions
Concise assembly instructions for the EGLO CAHUAMA table lamp, model numbers 99824A and 99825A. Learn how to install the bulb and connect the lamp to power.