1. Introduction
Thank you for choosing the Metalux 4SHP4040PB Integrated LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Figure 1.1: Front view of the Metalux 4SHP4040PB Integrated LED Shop Light, showcasing its black finish and integrated LED strip.
Key Features:
- Over 4,200 lumens output for bright illumination.
- Embossed tread pattern for an industrial aesthetic.
- Sleek black finish.
- Sealed stainless steel reflector for optimal light distribution.
2. Safety Information
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, and personal injury.
- WARNING: Disconnect power at the circuit breaker or fuse box before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
- Ensure the mounting surface can support the weight of the fixture.
- Do not look directly into the LED light source when illuminated.
3. Setup and Installation
The Metalux 4SHP4040PB LED Shop Light comes pre-assembled, simplifying the installation process. No complex assembly is required.
Installation Steps:
- Prepare the Installation Area: Ensure the power is turned off at the main circuit breaker. Identify a suitable location for mounting, ensuring it is structurally sound.
- Mounting the Fixture: Use appropriate hardware (not included) to securely hang the shop light. The fixture is designed for suspended mounting. Refer to the product dimensions for proper spacing.
- Connect Power: Plug the fixture's power cord into a standard 120V AC outlet. Ensure the connection is secure.
- Restore Power: Once the fixture is securely mounted and connected, restore power at the circuit breaker.
Figure 3.1: Example of the Metalux 4SHP4040PB Integrated LED Shop Light installed in a workshop environment.
Figure 3.2: Detail of the power cord connection point and the integrated pull chain switch on the fixture.
4. Operating Instructions
The Metalux 4SHP4040PB LED Shop Light is operated using a simple pull chain mechanism.
- Turning On: Gently pull the chain extending from the side of the fixture. The integrated LED light will illuminate.
- Turning Off: Pull the chain again to turn off the light.
Figure 4.1: Side view of the shop light, highlighting the location of the pull chain for operation.
5. Maintenance
The Metalux 4SHP4040PB Integrated LED Shop Light is designed for minimal maintenance. The LED components are integrated and sealed, meaning they are not user-serviceable.
Cleaning:
- WARNING: Always disconnect power before cleaning.
- To clean the exterior of the fixture, use a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
- Ensure the fixture is completely dry before restoring power.
6. Troubleshooting
If your Metalux 4SHP4040PB LED Shop Light is not functioning as expected, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the outlet. | Check the circuit breaker or fuse. Test the outlet with another device. |
| Fixture not properly plugged in. | Ensure the power cord is fully inserted into the outlet. | |
| Pull chain switch is in the 'off' position. | Pull the chain to toggle the light on. | |
| Light flickers or dims. | Unstable power supply. | Ensure the power source is stable. Avoid connecting to circuits with heavy loads. |
| Loose connection. | Check the power cord connection. |
If the issue persists after attempting these solutions, contact a qualified electrician or the manufacturer's customer support. As the unit is sealed, internal repairs are not possible by the user.
7. Specifications
Below are the technical specifications for the Metalux 4SHP4040PB Integrated LED Shop Light:
| Feature | Detail |
|---|---|
| Model Number | 4SHP4040PB |
| Brand | Metalux |
| Light Source Type | Integrated LED |
| Color Temperature | 4000K (Cool White) |
| Lumen Output | 4153 Lumens |
| Wattage | 40 Watts |
| Voltage | 120 Volts AC |
| Material | Alloy Steel |
| Finish Type | Oil Rubbed (Black) |
| Shape | Rectangular |
| Dimensions (Approx.) | 46.5 inches (Length) |
| Assembly Required | No |
| GTIN / UPC | 080083852208 |
| ASIN | B07TS53PWK |
Figure 7.1: Technical drawing showing the approximate dimensions of the fixture in inches and millimeters.
8. Warranty and Support
For specific warranty information, please refer to the documentation provided with your purchase or visit the official Metalux (COOPER LIGHTING Division) website. The warranty typically covers defects in materials and workmanship under normal use.
Customer Support:
If you have any questions, require technical assistance, or need to report a defect, please contact the manufacturer's customer support. Contact details can usually be found on the product packaging or the official brand website.
