1. Introduction
This manual provides essential information for the safe and effective use, care, and maintenance of your Joker Jabato CT28 Skinning Knife. Manufactured in Albacete, Spain, this fixed-blade knife is designed for reliability and performance in outdoor activities such as hunting, fishing, and camping.
The Joker Jabato CT28 features a hand-carved deer horn handle, a 4.33-inch MOVA 1.4116 stainless steel blade, and comes with a brown leather sheath.
2. Product Components
- Joker Jabato CT28 Skinning Knife (Fixed Blade)
- Brown Leather Sheath
- Branded Box Packaging
3. Setup and Initial Inspection
Upon receiving your Joker Jabato CT28 knife, perform the following steps:
- Unboxing: Carefully remove the knife and sheath from its branded packaging.
- Visual Inspection: Examine the knife for any signs of damage or manufacturing defects. Ensure the blade is securely fixed to the handle and the handle material is intact.
- Sheath Fit: Test the fit of the knife within its leather sheath. The knife should fit snugly and be retained securely to prevent accidental dislodgement.

Image 1: The Joker Jabato CT28 Skinning Knife, showcasing its fixed blade and hand-carved deer horn handle.

Image 2: The brown leather sheath designed for secure and convenient carrying of the Jabato CT28 knife.
4. Operating Instructions and Safe Handling
The Joker Jabato CT28 is a sharp tool designed for specific tasks. Always prioritize safety.
4.1. General Safety Guidelines
- Always Cut Away: When using the knife, always cut away from your body and fingers.
- Secure Grip: Maintain a firm and secure grip on the deer horn handle. The hand-carved texture is designed to enhance grip.
- Stable Surface: Ensure the item you are cutting is stable and will not shift unexpectedly.
- Proper Storage: When not in use, always store the knife in its protective leather sheath. Keep it out of reach of children.
- Never Throw: Do not throw the knife. It is not designed for throwing and can cause injury or damage.
- Intended Use: Use the knife only for its intended purposes, such as skinning, field dressing, or general outdoor utility tasks. Avoid using it as a pry bar, screwdriver, or can opener.

Image 3: A detailed view of the hand-carved deer horn handle, providing an ergonomic and secure grip.
4.2. Using the Sheath
- Insert the blade into the sheath carefully, ensuring the sharp edge does not catch on the leather.
- Secure the retention strap over the handle to prevent the knife from falling out.
- Attach the sheath to your belt or gear using the integrated loop.
5. Maintenance and Care
Proper maintenance ensures the longevity and performance of your Joker Jabato CT28 knife.
5.1. Cleaning
- Hand Wash Only: After each use, especially after contact with food or organic materials, clean the blade and handle thoroughly.
- Use warm water and mild soap. Avoid harsh detergents or abrasive cleaners.
- Rinse thoroughly and dry immediately with a soft cloth to prevent water spots and corrosion.
- Clean the leather sheath periodically with a damp cloth and allow it to air dry completely. Condition the leather as needed to maintain its flexibility and appearance.
5.2. Sharpening
- The MOVA 1.4116 stainless steel blade holds an edge well but will require sharpening over time.
- Use a quality sharpening stone or ceramic sharpener. Maintain the original blade angle for best results.
- If you are unfamiliar with knife sharpening, consider professional sharpening services to avoid damaging the blade.
5.3. Storage
- Store the knife in its leather sheath in a dry environment to prevent moisture accumulation.
- Avoid storing the knife in humid conditions or direct sunlight for extended periods, as this can affect the handle and sheath.
6. Troubleshooting
This section addresses common issues you might encounter with your knife.
- Dull Blade: If the blade loses its sharpness, refer to the sharpening instructions in Section 5.2.
- Minor Rust Spots: Although made from stainless steel, prolonged exposure to moisture or corrosive substances can cause minor surface rust. Clean immediately with a fine abrasive pad (e.g., Scotch-Brite) and apply a thin layer of mineral oil.
- Loose Sheath Fit: If the leather sheath becomes loose over time, it may be due to drying. Conditioning the leather can help restore its shape and retention.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Joker |
| Model Name | Jabato |
| Reference | CT28 |
| Blade Material | Stainless MOVA 1.4116 Steel |
| Hardness | 55 - 57 HRC |
| Blade Point | Skinner |
| Blade Finish | Satin |
| Blade Length | 4.33 inches (11 cm) |
| Blade Width | 1.57 inches (4 cm) |
| Blade Thickness | 3 mm |
| Handle Material | Deer Horn Point (Hand Carved) |
| Crosshead | Stainless |
| Sheath Material | Brown Leather |
| Blade Weight | 175 grams |
| Sheath Weight | 80 grams |
| Total Weight | 255 grams |
| Manufacture Location | Albacete, Spain |
| Recommended Uses | Camping, Hunting, Fishing |
8. Warranty Information
The Joker Jabato CT28 Skinning Knife comes with a 10-year warranty from the manufacturer, covering defects in materials and workmanship under normal use and maintenance. This warranty does not cover damage resulting from misuse, abuse, neglect, accident, improper sharpening, or normal wear and tear. For warranty claims, please retain your proof of purchase and contact Joker customer support.
9. Support
For further assistance, questions, or to report any issues with your Joker Jabato CT28 Skinning Knife, please visit the official Joker website or contact their customer service department. Refer to the packaging or the brand's official online presence for the most current contact information.
You can find more information about Joker products by visiting the Joker Store on Amazon.