UpStart Components ALB-WP4452164-2PK

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

UpStart Components WP4452164 Oven Light Bulb Replacement Manual

For KitchenAid & Whirlpool Ovens

Product Overview

This manual provides instructions for the installation, operation, and maintenance of the UpStart Components WP4452164 Oven Light Bulb. This product is designed as a replacement for original oven light bulbs in various KitchenAid and Whirlpool oven models.

Compatibility: This replacement bulb is compatible with KitchenAid and Whirlpool ovens that use the WP4452164 bulb, as well as part numbers AP6009417, 4452164, and PS11742576. Refer to your oven's manual for specific bulb requirements.

UpStart Components WP4452164 Oven Light Bulb

Image 1: The UpStart Components WP4452164 Oven Light Bulb, a clear G8 base bulb with two pins.

Installation Instructions

Safety First: Before attempting any installation, ensure your oven is completely disconnected from its power source. Turn off the circuit breaker supplying power to the oven to prevent electrical shock. Allow the oven and the old bulb to cool down completely before handling.

  1. Locate the Bulb: Open your oven door and locate the light bulb housing, typically on the back or side wall of the oven cavity.
  2. Remove Protective Cover (if applicable): Some ovens have a glass or metal cover protecting the bulb. Carefully remove this cover by unscrewing it or releasing its clips. Refer to your oven's specific manual for instructions on removing the cover.
  3. Remove Old Bulb: Gently pull the old bulb straight out from its socket. Avoid twisting if it's a pin-base (G8) bulb, as this can damage the socket. If the bulb is broken, use pliers to carefully extract the base, ensuring power is off.
  4. Insert New Bulb: Align the two pins of the new UpStart Components WP4452164 bulb with the holes in the socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force it.
  5. Replace Protective Cover: Reattach the protective cover, if one was removed, ensuring it is securely fastened.
  6. Restore Power: Close the oven door. Restore power to the oven by turning the circuit breaker back on.
  7. Test the Light: Turn on your oven light to confirm the new bulb is working correctly.
UpStart Components WP4452164 Oven Light Bulb Packaging

Image 2: Packaging for the UpStart Components WP4452164 Oven Light Bulb, indicating the brand.

Operation

The UpStart Components WP4452164 Oven Light Bulb operates in conjunction with your oven's existing lighting system. Once installed, the bulb will illuminate when the oven light function is activated via your oven's control panel or switch. It provides clear visibility inside the oven cavity during cooking or cleaning.

Care and Maintenance

  • Cleaning: If the bulb or its protective cover becomes dirty, ensure the oven is cool and power is off before cleaning. Use a soft, damp cloth to wipe the bulb and cover. Avoid abrasive cleaners or excessive moisture.
  • Regular Inspection: Periodically check the bulb and its socket for any signs of wear or damage. If the bulb flickers or appears dim, it may be nearing the end of its lifespan.
  • Replacement: Replace the bulb when it burns out. Always use a compatible replacement bulb like the UpStart Components WP4452164 to ensure proper fit and function.

Troubleshooting

ProblemPossible CauseSolution
Bulb does not light up after installation.
  • No power to the oven.
  • Bulb not seated correctly.
  • Faulty bulb.
  • Oven light switch malfunction.
  • Check oven's circuit breaker.
  • Ensure bulb pins are fully inserted into the socket.
  • Test with another known working bulb if available.
  • Consult an appliance technician if the oven light switch is suspected.
Bulb flickers or is dim.
  • Loose connection.
  • Bulb nearing end of life.
  • Incorrect voltage supply.
  • Ensure bulb is firmly seated.
  • Replace the bulb.
  • Verify oven's electrical supply meets specifications.
Bulb burns out quickly.
  • Over-voltage.
  • Excessive vibration.
  • Defective bulb.
  • Ensure oven's voltage is stable and within bulb specifications.
  • Ensure bulb is securely installed to minimize vibration.
  • Replace with a new bulb. If issue persists, consult an appliance technician.

Technical Specifications

FeatureSpecification
BrandUpStart Components
Model NumberALB-WP4452164-2PK
Light TypeLED
Wattage5 watts
Bulb BaseG8
Incandescent Equivalent Wattage1.7 Watts
Light ColorWarm White
Voltage12 Volts
Brightness300 Lumens
MaterialGlass, Metal
Indoor/Outdoor UsageIndoor
Power SourceCorded Electric
Accepted Voltage Frequency100 to 120 Volts and 60 Hertz

Warranty Information

Any warranties for this UpStart Components WP4452164 Oven Light Bulb replacement product are offered solely by UpStart Components. This product is not affiliated with any original equipment manufacturer (OEM) brands, and any warranties provided by original manufacturers do not apply to this replacement part. Please refer to the product packaging or contact UpStart Components directly for specific warranty terms and conditions.

Customer Support

If you encounter any issues or have questions regarding the UpStart Components WP4452164 Oven Light Bulb that are not addressed in this manual, please contact UpStart Components customer support. For the most current contact information, please refer to the product packaging or the official UpStart Components website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.