Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your AIKE AK1255 Wall Mounted Touchless Automatic Foam Soap Dispenser. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
Product Features
- Touch-Free Operation: Infrared sensor for hygienic, automatic dispensing.
- Adjustable Soap Volume: Five levels of foam soap supply, ranging from 0.4ml to 1.6ml per dispense.
- Durable Construction: Made from polished stainless steel for rust resistance and durability.
- Wide Compatibility: Works with most all-purpose foam soaps. Liquid soap can be diluted with water (typically 2:1 water to liquid soap ratio) to create foam.
- Easy Refill: Features a wide opening for quick and easy soap replenishment.
- Battery Powered: Operates on 4 AA batteries (not included), providing long-lasting power for up to 6 months or 36,500 dispenses.
- Wall Mounted Design: Surface mount installation with screws.
Image: The AIKE AK1255 dispenser highlighting its precise control with 5 levels of soap supply.
Image: A hand receiving foam from the touch-free dispenser, emphasizing hygienic operation.
Installation
The AIKE AK1255 is designed for surface wall mounting. Follow these steps for proper installation:
- Choose Location: Select a suitable wall location. Ensure a minimum installation distance from the unit to the desktop: 10 inches (25cm) on a normal desktop, and 13.8 inches (35cm) on a reflective desktop to prevent accidental activation.
- Remove Mounting Panel: Unscrew the anti-theft screw at the bottom of the dispenser and remove the mounting panel from the back of the unit.
- Mark Drill Holes: Place the mounting panel against the wall at the desired height and mark the positions for drilling.
- Drill and Fix: Drill holes and insert wall anchors (if necessary). Secure the mounting panel to the wall using screws.
- Install Batteries: Open the battery compartment, insert 4 AA batteries (not included) ensuring correct polarity, then close the compartment.
- Hang Unit: Carefully align the dispenser with the mounted panel and slide it down to secure it. Re-tighten the anti-theft screw at the bottom.
Image: Visual guide for proper installation distance from the dispenser to the countertop.
Video: This video demonstrates the installation process, including removing the mounting panel, installing batteries, and securing the dispenser to the wall. It also shows how to fill the dispenser and adjust soap volume.
Operation
- Filling with Soap:
- Unlock the top cover by turning the small knob.
- Remove the inner cap.
- Pour foam soap directly into the reservoir. If using liquid soap, dilute it with water. A common ratio is 2 parts water to 1 part liquid soap, but this may vary depending on soap thickness.
- Replace the inner cap and lock the top cover.
Image: A hand pouring soap into the dispenser's wide opening for easy refilling.
- Dispensing Foam: Place your hand under the sensor at the bottom of the dispenser. The unit will automatically dispense a measured amount of foam soap.
- Adjusting Soap Volume: The dispenser offers five levels of soap output. To adjust, short press the button located on the top of the dispenser. Each press cycles through the levels, indicated by a light. The volume ranges from 0.4ml (Level 1) to 1.6ml (Level 5).
Maintenance
Regular cleaning ensures optimal performance and hygiene.
- Exterior Cleaning: Wipe the exterior of the dispenser with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Nozzle Cleaning: The liquid-dropping nozzle and anti-clogging plug are removable and washable. Periodically remove and rinse them under running water to prevent soap buildup and clogging.
- Battery Replacement: Replace all 4 AA batteries when the dispenser's performance declines or the indicator light signals low power.
Video: This video demonstrates the cleaning process for the removable nozzle and anti-clogging plug, ensuring proper maintenance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser not activating or dispensing soap. |
|
|
| Soap dispenses inconsistently or too little. |
|
|
| Dispenser activates unintentionally. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | AK1255 |
| Material | Stainless Steel |
| Color | Polished Stainless Steel |
| Product Dimensions | 4.33"L x 3.94"W x 8.66"H |
| Liquid Volume Capacity | 710 Milliliters (approx. 24 fl.oz.) |
| Power Source | 4 AA batteries (not included) |
| Soap Output Levels | 5 levels (0.4ml to 1.6ml) |
| Manufacturer | Zhejiang AIKE Appliances Co., Ltd. |
Warranty and Support
AIKE provides a 1-year warranty for this product, covering manufacturing defects. This warranty does not cover human-induced damage. For warranty claims or customer service, please contact AIKE support. If eligible, AIKE will provide new parts for free and custom services.
For further assistance, please refer to the official AIKE website or contact their customer support directly.