Introduction
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Hansgrohe Talis E Built-in Wall-Mounted Bath/Shower Mixer. Please read all instructions carefully before beginning installation or use. Retain this manual for future reference.
Safety Information
- Installation must be performed by a qualified professional in accordance with local plumbing and building codes.
- Ensure the main water supply is turned off before any installation or maintenance work.
- An adjustable temperature limiter is integrated to protect against excessively hot water. This should be set during installation.
- Use only genuine Hansgrohe spare parts for repairs to ensure product integrity and safety.
- Protect the product from frost.
Package Contents
Verify that all components are present before beginning installation:
- Single-lever bath mixer (Brushed Bronze)
- Functional block
- Mounting instructions
- Fixing material
Note: For built-in installation, the iBox Universal basic set (Hansgrohe part #01800180) is required and must be ordered separately.
Setup and Installation
The Hansgrohe Talis E mixer is designed for built-in wall mounting, which allows for a clean aesthetic and maximizes space around the bathtub. Follow the detailed mounting instructions provided with the product and ensure the iBox Universal basic set is correctly installed within the wall.
Figure 1: Front view of the Hansgrohe Talis E Built-in Wall-Mounted Bath/Shower Mixer.
Figure 2: Angled view of the Hansgrohe Talis E Built-in Wall-Mounted Bath/Shower Mixer, showcasing its design.
Figure 3: Technical drawing illustrating the precise dimensions for installation of the Hansgrohe Talis E mixer. All measurements are in millimeters.
Key Installation Steps:
- Install the Hansgrohe iBox Universal basic set (#01800180) into the wall according to its specific instructions.
- Connect the water supply lines to the iBox.
- Mount the functional block and the mixer trim set onto the iBox.
- Ensure all connections are watertight and secure.
- Set the adjustable temperature limiter to the desired maximum temperature during assembly to prevent scalding.
Operating Instructions
The Talis E mixer features a single lever for intuitive control of water flow and temperature, and an integrated diverter for switching between bath filler and shower functions.
Water Flow and Temperature Control:
- Flow Control: Lift the lever to increase water flow. Push down to decrease or stop flow.
- Temperature Control: Move the lever left for hotter water and right for colder water.
Diverter Function:
The mixer includes a diverter to switch water output between the bath spout and a single shower head. The diverter automatically resets to the bath function after the water is turned off.
- To activate the shower, pull the diverter knob.
- To return to the bath filler, push the diverter knob or turn off the water supply.
Figure 4: Flow rate diagram. Curve (1) represents the shower outlet flow, and curve (2) represents the bath outlet flow. At 3 bars pressure, the flow rate is 21 l/min for the shower and 28 l/min for the bath.
Maintenance
Regular cleaning and proper care will ensure the longevity and optimal performance of your Hansgrohe Talis E mixer. The smooth ceramic mixing system is designed for reliable and durable operation.
Cleaning Instructions:
- Clean the surface with a soft cloth and a mild, non-abrasive cleaning agent.
- Avoid using cleaners containing alcohol, hydrochloric acid, formic acid, acetic acid, or phosphoric acid, as these can damage the brushed bronze finish.
- Rinse thoroughly with clean water after cleaning and dry with a soft cloth to prevent water spots.
Spare Parts:
Hansgrohe ensures the availability of spare parts for up to 15 years after the product line has been discontinued. Contact an authorized Hansgrohe service partner for genuine spare parts.
Troubleshooting
If you experience issues with your Hansgrohe Talis E mixer, please refer to the following common troubleshooting tips:
- Reduced Water Flow: Check for blockages in the aerator or shower head. Ensure water supply valves are fully open.
- Temperature Fluctuations: Verify that the hot and cold water supplies are correctly connected. If the issue persists, consult a professional plumber.
- Leaking: Minor drips can sometimes be resolved by ensuring the handle is fully closed. Persistent leaks may indicate a worn-out cartridge or seal, requiring professional inspection and replacement.
- Noise during Operation: The mixer is designed with a silencer to reduce flow noise. If unusual noises occur, check water pressure or consult a professional.
For complex issues or repairs, it is recommended to contact a qualified plumber or Hansgrohe customer service.
Specifications
| Feature | Specification |
|---|---|
| Manufacturer | Hansgrohe |
| Model Number | 71745140 |
| Product Dimensions (L x W x H) | 5.9 x 15.5 x 19.1 cm |
| Weight | 1.92 kilograms |
| Color | Brushed Bronze |
| Style | Bathtub |
| Finish | Brushed |
| Material | Synthetic, Metallic (Bronze handle) |
| Installation Method | Built-in Wall Mounting |
| Number of Handles | 1 |
| Handle Position | Center |
| Number of Holes Required | 1 |
| Flow Rate (at 3 bar) | 28 Liters per minute (bath spout) / 21 Liters per minute (shower connection) |
| Special Feature | Adjustable Temperature Limiter |
| Country of Origin | Germany |
Warranty
Hansgrohe provides a 5-year manufacturer's warranty for this product. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and material faults under normal use and maintenance. For full warranty terms and conditions, please refer to the official Hansgrohe website or contact customer service.
Support
For technical assistance, spare parts, or further inquiries, please contact Hansgrohe customer support or visit the official Hansgrohe website. You can find contact information on the Hansgrohe brand store page or through your local Hansgrohe dealer.
Hansgrohe Brand Store: Visit Hansgrohe Store
