Nerf E6170EU5

Nerf Elite SHELLSTRIKE DS-6 Blaster Instruction Manual

Model: E6170EU5

1. Introduction

This manual provides essential instructions for the safe and proper use of your Nerf Elite SHELLSTRIKE DS-6 blaster. The SHELLSTRIKE DS-6 is designed to fire three Nerf Elite darts simultaneously using a unique shell-loading mechanism. Please read this manual thoroughly before operating the blaster.

Nerf Elite SHELLSTRIKE DS-6 Blaster

Figure 1: The Nerf Elite SHELLSTRIKE DS-6 Blaster.

2. Safety Information

3. Package Contents

Verify that all items are present in your package:

Nerf Elite SHELLSTRIKE DS-6 Blaster with darts and cartridges

Figure 2: Blaster, two cartridges, and six darts included in the package.

4. Setup

4.1 Loading Darts into Cartridges

  1. Take one Nerf Elite cartridge.
  2. Insert three Nerf Elite darts into the openings at the front of the cartridge until they are securely seated.

4.2 Inserting Cartridges into the Blaster

  1. Locate the orange bar on top of the blaster.
  2. Lift the orange bar upwards to open the blaster's loading mechanism. The front section of the blaster will pivot open.
  3. Blaster with loading mechanism open

    Figure 3: Blaster shown with the loading mechanism open.

  4. Insert a loaded cartridge into the designated slot within the open mechanism. Ensure it clicks into place.
  5. Inserting a loaded cartridge into the blaster

    Figure 4: A loaded cartridge being inserted into the blaster.

  6. Close the blaster by pushing the front section back down until it locks securely.
  7. Closing the blaster after cartridge insertion

    Figure 5: Closing the blaster after a cartridge has been inserted.

5. Operating Instructions

5.1 Firing the Blaster

  1. Ensure the blaster is loaded with a cartridge and securely closed.
  2. Hold the blaster firmly.
  3. Aim at your target, ensuring no eyes or faces are in the line of fire.
  4. Pull the trigger to fire three darts simultaneously.
  5. User holding the Nerf Shellstrike DS-6 blaster, ready to fire

    Figure 6: A user holding the blaster, prepared to engage a target.

    User aiming the Nerf Shellstrike DS-6 blaster

    Figure 7: A user aiming the blaster with both hands.

5.2 Reloading

The blaster can store two cartridges for quick reloading.

  1. After firing, lift the orange bar to open the blaster.
  2. Remove the empty cartridge.
  3. Insert a pre-loaded cartridge (see Section 4.2).
  4. Close the blaster to prepare for the next shot.

6. Maintenance

7. Troubleshooting

ProblemPossible CauseSolution
Darts do not fire or fire weakly.
  • Blaster not fully closed.
  • Cartridge not properly seated.
  • Darts are damaged or not official Nerf darts.
  • Ensure the blaster is securely closed.
  • Re-insert the cartridge firmly.
  • Use only official, undamaged Nerf Elite darts.
Cartridge difficult to insert or remove.
  • Blaster mechanism not fully open.
  • Obstruction in the cartridge slot.
  • Lift the orange bar completely to fully open the blaster.
  • Check for any debris in the slot and remove carefully.

8. Specifications

9. Warranty and Support

For warranty information, product support, or to purchase replacement parts and darts, please contact Hasbro customer service.

You can typically find contact information on the official Hasbro website or on the product packaging.

Manufacturer: Hasbro

Related Documents - E6170EU5

Preview NERF Shellstrike DS-6 Blaster: Instructions and Operation Guide
Official instructions for the NERF Shellstrike DS-6 blaster, covering storage, loading darts, and firing procedures. Learn how to use your NERF blaster safely and effectively.
Preview NERF ULTRA DORADO Blaster: Instructions and Safety Guide
Official instructions for the NERF ULTRA DORADO blaster, including loading, firing, safety warnings, and troubleshooting. Learn how to use your NERF ULTRA DORADO safely and effectively.
Preview Nerf N-Strike Elite Strongarm Blaster: User Guide
Official instructions for the Nerf N-Strike Elite Strongarm toy blaster. Learn how to load darts, fire single shots, and use the slam-fire feature for rapid firing. Includes safety warnings and product details.
Preview NERF Modulus Ghost Ops Evader Blaster: Assembly, Operation, and Safety Guide
Comprehensive guide for the NERF Modulus Ghost Ops Evader blaster, covering assembly, loading, firing, battery replacement, and important safety warnings. Learn how to operate your NERF blaster effectively and safely.
Preview Nerf Hyper MACH-100 Blaster: Operating and Safety Instructions
Comprehensive guide for the Nerf Hyper MACH-100 blaster, detailing how to load, fire, clear jams, store the blaster, and important safety precautions. Includes battery information and product compatibility.
Preview Nerf Pro Stryfe X Dart Blaster: User Manual and Safety Instructions
Comprehensive guide to operating the Nerf Pro Stryfe X Dart Blaster, including charging, loading, firing, safety warnings, and storage. Features detailed instructions for safe play and regulatory information.