ALIEN PRO COLOR CLOUD LED Bar Instruction Manual

Introduction

The ALIEN PRO COLOR CLOUD LED Bar is a versatile lighting fixture designed to enhance concerts, events, and small to medium-sized venues. It features a combination of yellow LEDs and RGB SMD LEDs, offering a wide range of color mixing and dynamic effects. This manual provides essential information for the safe and effective operation, setup, and maintenance of your COLOR CLOUD LED Bar.

Product Features

• Light Source: 12 x 3W yellow LEDs and 72 x 5050 RGB SMD LEDs for vibrant color output.
• Operating Modes: DMX 512, Automatic, Sound-activated, Master-Slave for flexible control.
• DMX Channels: Supports 6, 9, 84, and 89 DMX channels for advanced programming.
• Effects: Capable of Pixel/Marquee and Wash/Beam effects.
• Dimming: Linear and non-linear dimming from 0-100%.
• Construction: Durable aluminum and plastic housing.
• Power Supply: 90-240V AC, 50-60Hz.
• Power Consumption: 50W.
• IP Rating: IP20 (suitable for indoor use).

Image: The ALIEN PRO COLOR CLOUD LED Bar showcasing its full spectrum of RGB colors and yellow LEDs.

Setup

1. Unpacking: Carefully remove the LED bar from its packaging. Inspect for any signs of damage during transit.
2. Mounting: The unit is designed for rack mounting. Ensure the mounting surface or truss is stable and capable of supporting the fixture's weight (approximately 4.5 kg). Use appropriate clamps or hardware (not included) for secure installation.
3. Power Connection: Connect the power cable to the unit's power input (90-240V AC, 50-60Hz). Ensure the power source matches the specified voltage.
4. DMX Connection (Optional): For DMX control, connect a DMX cable from your DMX controller to the DMX IN port on the LED bar. If linking multiple units, connect from the DMX OUT of the first unit to the DMX IN of the next.
5. Initial Power On: Once securely mounted and connected, power on the unit. The display (if present) should illuminate, indicating readiness.

Image: Rear panel of the LED bar, highlighting the power input and DMX IN/OUT ports for setup.

Operating Modes

The ALIEN PRO COLOR CLOUD LED Bar offers several operating modes to suit various applications:

• DMX 512 Mode: For professional control, connect the unit to a DMX controller. Set the DMX address on the fixture according to your DMX system's configuration. Refer to the DMX channel chart (not provided in this general manual, typically found in a detailed DMX manual) for specific control parameters like color mixing, dimming, and effect selection.
• Automatic Mode: The unit cycles through pre-programmed light shows and color patterns automatically. This mode is ideal for quick setup without external control.
• Sound-Activated Mode: The LED bar reacts to ambient sound or music, changing patterns and colors in sync with the beat. Ensure the built-in microphone is not obstructed.
• Master-Slave Mode: Link multiple COLOR CLOUD units together. Designate one unit as the "Master" and the others as "Slaves." The slave units will mirror the master's operation, creating synchronized lighting effects across multiple fixtures.

Effects and Dimming

The LED bar supports various visual effects, including Pixel/Marquee effects where individual LED sections can be controlled, and Wash/Beam effects for broad area illumination or focused light beams. The 0-100% linear and non-linear dimming allows for precise control over light intensity.

Image: The LED bar showcasing a vibrant purple light effect, demonstrating its color capabilities.

Image: The LED bar displaying a dynamic split effect with red and blue lighting, highlighting its pixel control capabilities.

Maintenance

• Cleaning: Regularly clean the exterior of the fixture with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth. Do not use abrasive cleaners or solvents.
• Lens Cleaning: Keep the LED lenses clean to ensure optimal light output. Use a soft, lint-free cloth and a mild glass cleaner if necessary.
• Inspection: Periodically inspect power cables, DMX cables, and mounting hardware for any signs of wear, damage, or loose connections.
• Storage: When not in use for extended periods, store the LED bar in a dry, dust-free environment, preferably in its original packaging or a protective case.

Troubleshooting

If problems persist after attempting these solutions, please contact Alien Pro customer support for further assistance.

Specifications

Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or contact Alien Pro directly. If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your product, please reach out to Alien Pro customer support or the authorized reseller from whom you purchased the product.

Manufacturer: Alien Pro

Country of Origin: China