Ponkor AFG1015-6

Ponkor Rechargeable Battery Pack for Xbox - Instruction Manual

Model: AFG1015-6

Introduction

This manual provides comprehensive instructions for the safe and efficient use of your Ponkor Rechargeable Battery Pack and Fast Charging Station. Designed for Xbox Series X/S, Xbox One, Xbox One S, Xbox One X, and Xbox One Elite Wireless Controllers, this system ensures extended gameplay and convenient charging.

What's Included

4 x 5800mWh Rechargeable Xbox Batteries
1 x Xbox Battery Charger Station
1 x USB-C Charging Cable
1 x User Manual (This Document)

Setup

Charging Station Connection

Connect the charging station to a power source using the provided USB-C cable. The station supports various USB inputs, including USB adapters, power banks, laptops, and car chargers.

Ponkor charging station with USB-C and Micro USB ports, showing connections to various power sources like a USB adapter, power bank, laptop, and car charger.

Figure 1: Connecting the charging station to a USB power source.

Battery Insertion into Charger

Carefully insert the rechargeable batteries into the charging slots of the station. Ensure correct polarity (positive and negative ends) as indicated on the batteries and charger.

Ponkor charging station with two 2600mAh batteries inserted, showing green indicator lights for CH1 and CH2, and two additional batteries standing next to the charger.

Figure 2: Batteries inserted into the charging station.

Battery Installation into Controller

Open the battery compartment of your Xbox controller. Insert one fully charged Ponkor rechargeable battery, ensuring the correct orientation. Close the battery compartment.

An Xbox controller with its battery cover open, showing a 2600mAh rechargeable battery being inserted. The charging station is visible in the foreground, connected to a laptop.

Figure 3: Installing a rechargeable battery into an Xbox controller.

Operating Instructions

Charging Process

When batteries are placed in the charging station, the indicator light will turn red, signifying that charging is in progress. Once fully charged, the light will turn green. A full charge typically takes approximately 3 hours.

Ponkor charging station showing red lights for 'Charging' and green lights for 'Full Charge' with a 2.5 hours full charge indicator. Two 2600mAh batteries are in the charger.

Figure 4: Charging status indicators on the station.

Battery Life

Each 5800mWh rechargeable battery provides over 25 hours of continuous gameplay, ensuring extended gaming sessions without interruption.

Controller Compatibility

The Ponkor rechargeable battery packs are compatible with a wide range of Xbox controllers, including:

Xbox One Wireless Controller
Xbox One S Wireless Controller
Xbox One X Wireless Controller
Xbox One Elite Wireless Controller
Xbox Series X Wireless Controller
Xbox Series S Wireless Controller

Image showing various Xbox controllers (Xbox Series X, Xbox Series S, Xbox One Elite, Xbox One S, Xbox One X, Xbox One) compatible with the 2600mAh rechargeable batteries.

Figure 5: Compatible Xbox controllers.

Multiple Battery Compatibility

The charging station is also capable of charging standard AA Ni-MH and Ni-CD rechargeable batteries. Ensure correct insertion with attention to positive (+) and negative (-) terminals.

Ponkor charging station with two 2600mAh Xbox batteries and two standard AA Darucell batteries, illustrating its compatibility with multiple battery types.

Figure 6: Charging station compatibility with various rechargeable AA batteries.

Maintenance

Keep the charging station and batteries clean and dry. Use a soft, dry cloth to wipe surfaces.
Avoid exposing the product to extreme temperatures or direct sunlight.
Store batteries in a cool, dry place when not in use.
Do not disassemble the batteries or charging station.

Troubleshooting

Problem	Possible Cause	Solution
Batteries not charging	Incorrect battery insertion; Loose cable connection; Faulty power source.	Ensure batteries are inserted with correct polarity. Check USB cable connection. Try a different USB port or power adapter.
Short battery life	Batteries not fully charged; Old batteries; High power consumption by controller.	Ensure batteries are charged until the indicator light turns green. Consider replacing very old batteries. Reduce controller vibration settings if possible.
Charging indicator not working	Loose connection; Charger malfunction.	Verify secure connection. If problem persists, contact customer support.

Specifications

Brand	Ponkor
Model Number	AFG1015-6
Battery Capacity	5800mWh (2600mAh per battery)
Charging Time	Approximately 3 hours
Input Voltage	240 Volts
Output Voltage	200 Volts
Product Dimensions	5.39 x 4.92 x 1.22 inches
Item Weight	10.8 ounces
Safety Features	Over-Charging, Over-Heated, Over-Current, Over-Voltage, Short-Circuit, Over-Discharge Protection

Diagram of the Smart Fast Battery Charger highlighting its dimensions (3.93in length, 2.71in width, 1.18in height) and various protection features like Over-Heated Protection, Short Circuit Protection, Over-Voltage Protection, and Over-Charging Protection.

Figure 7: Smart Fast Battery Charger dimensions and safety features.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Ponkor website. Keep your purchase receipt for warranty claims.