1. Introduction
This manual provides essential information for the safe and effective use of your PETZL Actik headlamp. The Actik headlamp is designed for dynamic outdoor activities, offering versatile lighting options and reliable performance.
Image 1.1: The PETZL Actik Headlamp, showcasing its compact design and adjustable headband.
Key Features:
- Versatile Lighting: Two beam patterns (flood or mixed) and multiple white brightness levels (up to 350 lumens) for proximity, movement, or distance vision.
- Red Lighting: Preserves night vision and prevents blinding others in a group.
- Hybrid Concept: Compatible with either the PETZL CORE rechargeable battery or three AAA/LR03 batteries (included).
- User-Friendly: Single-button operation for easy selection of brightness and light color, with a lock function to prevent accidental activation.
- Reflective Headband: Enhances night visibility.
- Water Resistance: IPX4 rated for weather resistance.
2. Setup
2.1 Battery Installation
The Actik headlamp utilizes the Hybrid Concept, allowing it to be powered by either three AAA/LR03 batteries or a PETZL CORE rechargeable battery (sold separately).
- Open the battery compartment located at the rear of the lamp body.
- Insert three AAA/LR03 batteries, observing the polarity markings (+/-) inside the compartment. Alternatively, insert a PETZL CORE rechargeable battery.
- Close the battery compartment securely.
Image 2.1: Illustration of the Hybrid Concept, showing how to insert either AAA batteries or a CORE rechargeable battery into the headlamp.
2.2 Headband Adjustment
The elastic headband is adjustable to ensure a comfortable and secure fit on your head or helmet.
- Place the headlamp on your head.
- Adjust the strap length using the buckle until the headlamp is snug but not too tight.
- The headband is detachable and washable for hygiene.
Image 2.2: The headlamp with its adjustable and reflective headband, designed for comfort and visibility.
3. Operating Instructions
The Actik headlamp features a single button for all functions.
Image 3.1: Close-up of the headlamp showing the single power button and the red light indicator.
3.1 Power On/Off and White Lighting Modes
- To Turn On: Press the button once. The lamp will turn on in the lowest white light mode.
- To Change Brightness: Press the button repeatedly to cycle through the white light modes (low, medium, high).
- To Turn Off: When the lamp is on, press and hold the button for approximately 2 seconds.
Image 3.2: Diagram illustrating the three white lighting levels: Proximity, Movement, and Distance, along with flood and mixed beam patterns.
3.2 Red Lighting Mode
Red lighting is useful for preserving night vision and avoiding dazzling others.
- To Activate Red Light: From the off position, press and hold the button for approximately 2 seconds until the red light illuminates.
- Red Strobe Mode: While in red light mode, press the button once to switch to red strobe.
- To Return to White Light: From red light mode, press the button once to return to the lowest white light setting.
- To Turn Off: From red light mode, press and hold the button for approximately 2 seconds.
3.3 Lock Function
The lock function prevents accidental activation during transport or storage.
- To Lock: When the lamp is off, press and hold the button for approximately 4 seconds until the red light flashes three times.
- To Unlock: Press and hold the button for approximately 4 seconds until the red light flashes three times. The lamp will then turn on in the lowest white light mode.
4. Maintenance
4.1 Cleaning
- Clean the headlamp body with a damp cloth. Do not use harsh chemicals or abrasive materials.
- The elastic headband is detachable and can be hand-washed with mild soap and water. Allow it to air dry completely before reattaching.
4.2 Battery Care and Storage
- For prolonged storage, remove the batteries from the headlamp to prevent leakage and damage.
- After use in humid environments, it is recommended to open the battery compartment to allow it to dry, as the compartment is not fully sealed against water ingress.
5. Troubleshooting
5.1 Light Not Turning On
- Check if the batteries are correctly inserted with the correct polarity.
- Ensure the batteries are not depleted. Replace AAA batteries or recharge the CORE battery.
- Verify that the lock function is not activated. Unlock the headlamp as described in section 3.3.
5.2 Dim Light or Short Burn Time
- This indicates low battery power. Replace AAA batteries or recharge the CORE battery.
- Ensure the battery contacts are clean and free of corrosion.
5.3 Accidental Activation
- Utilize the lock function (section 3.3) when transporting or storing the headlamp to prevent unintended power-on.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | E099FA00 |
| Brightness | Up to 350 Lumens (White Light) |
| Power Source | 3 x AAA/LR03 batteries (included) or PETZL CORE rechargeable battery (sold separately) |
| Battery Type | Alkaline (for AAA) |
| Item Weight | 3.52 ounces (100g approx.) |
| Product Dimensions | 5"D x 5"W x 2"H (approximate) |
| Water Resistance | IPX4 (Weather Resistant) |
| Light Source Type | LED |
| Special Features | Night Vision (Red Light), Rechargeable (with CORE battery) |
7. Warranty Information
The PETZL Actik headlamp is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, modifications, or unauthorized repairs. Please retain your proof of purchase for warranty claims.
8. Support
For further assistance, technical support, or warranty claims, please contact PETZL customer service through their official website or the retailer where the product was purchased.
