Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Moen TS6731 90 Degree Two-Handle Wall Mount Bathroom Faucet Trim. Please read all instructions carefully before beginning installation to ensure proper function and to avoid damage.
The Moen 90 Degree collection is characterized by its minimalist design, featuring geometric forms, squared corners, and straight lines. This trim kit is designed to complement contemporary bathroom aesthetics.
Key Features:
- Versatile Design: Chrome finish provides a highly reflective, mirror-like appearance suitable for various decorating styles.
- Wall-Mount Installation: Designed for efficient use of space.
- WaterSense Certified: Meets EPA WaterSense criteria, ensuring water conservation without compromising performance.
- M-PACT Common Valve System: Built on the Moen M-PACT common valve system, allowing for future style updates without replacing existing plumbing.
Setup and Installation
Proper installation is crucial for the optimal performance of your faucet trim. This trim kit requires a Moen valve 9700 to complete the installation. The valve is sold separately.
Image: The Moen 9700 valve, which is required for installation and sold separately. It features hot and cold water inlets.
This faucet trim is designed to fit a three-hole sink configuration for wall-mount applications. Ensure your sink or wall setup accommodates this requirement.
Image: A diagram illustrating a standard three-hole sink configuration, which is compatible with this faucet trim.
Installation Steps (General Overview):
- Ensure water supply is turned off at the main shut-off valve.
- Install the Moen 9700 valve according to its specific instructions.
- Mount the faucet spout and handles to the wall, aligning with the valve connections.
- Connect the hot and cold water lines to the appropriate valve ports.
- Secure all connections and test for leaks before turning on the main water supply.
- Install the decorative trim pieces and handles.
Refer to the detailed installation guide included with your Moen 9700 valve for precise plumbing and mounting instructions.
Operating Instructions
The Moen TS6731 faucet trim features two handles for controlling water flow and temperature.
- Water Flow: Rotate the handles to turn the water on or off.
- Temperature Control: The left handle typically controls hot water, and the right handle controls cold water. Adjust the desired temperature by blending the hot and cold water flow using both handles.
This faucet has a maximum flow rate of 1.2 Gallons Per Minute (GPM), designed to conserve water while providing adequate performance.
Maintenance
To maintain the chrome finish and ensure the longevity of your Moen faucet, follow these cleaning and care guidelines:
- Regular Cleaning: Clean the faucet regularly with a soft, damp cloth and mild soap.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the chrome finish.
- Drying: After cleaning, wipe the faucet dry to prevent water spots and mineral buildup.
- Aerator Maintenance: If water flow decreases, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
Troubleshooting
If you encounter issues with your Moen TS6731 faucet trim, consider the following common problems and solutions:
- Low Water Flow: Check if the aerator is clogged with debris. Clean or replace the aerator. Ensure water supply valves are fully open.
- Leaks from Spout: This may indicate an issue with the valve cartridges. Consult a qualified plumber or Moen customer support for assistance.
- Dripping Faucet: A persistent drip usually points to worn-out valve cartridges. These may need to be replaced.
- Difficulty Adjusting Temperature: Ensure both hot and cold water supplies are active and at adequate pressure.
For issues not resolved by these steps, or for internal valve problems, it is recommended to contact Moen customer support or a certified plumber.
Specifications
| Feature | Specification |
|---|---|
| Brand | Moen |
| Model Name | 90 Degree |
| Part Number | TS6731 |
| Finish Type | Chrome |
| Material | Metal |
| Color | Chrome |
| Mounting Type | Wall Mount |
| Number of Handles | 2 |
| Hole Count | 3 |
| Maximum Flow Rate | 1.2 Gallons Per Minute |
| Spout Height | 2 Inches |
| Spout Reach | 8.94 Inches |
| Item Weight | 3.42 Pounds |
| Product Dimensions | 8.94 x 14.25 x 2 inches |
Warranty and Support
Your Moen TS6731 90 Degree Two-Handle Wall Mount Bathroom Faucet Trim is backed by a Limited Lifetime Warranty. This warranty covers defects in material and manufacturing workmanship under normal use.
For detailed warranty terms and conditions, or for technical support and service, please visit the official Moen website or contact Moen customer service directly. Keep your proof of purchase for warranty claims.
You can find more information and contact details on the Moen Store on Amazon or their official corporate website.
