1. Introduction
This manual provides instructions for the safe and efficient use of your IDMIX CH05 Portable Charger. This 10000mAh power bank features a built-in AC wall plug, MFi-certified Lightning cable, and USB-C cable, offering versatile charging solutions for various devices.
2. Product Overview and Features
The IDMIX CH05 is designed for convenience and portability, integrating multiple charging functionalities into a compact device.
- Ultra-Compact Design: Features a built-in foldable AC wall plug for easy portability, fitting into pockets or bags without snagging.
- All-in-One Charging Solution: Equipped with a built-in AC wall plug for direct charging, a USB output port, a built-in MFi Lightning cable, and a built-in USB-C cable.
- Fast Charging Capabilities: Offers PD20W fast charging via the USB-C port and built-in USB-C cable, capable of charging compatible iPhones to 50% in approximately 30 minutes. The USB-A port provides 18W output.
- Broad Compatibility: Compatible with a wide range of devices including iPhones, Android smartphones, AirPods, Bluetooth headsets, fitness trackers, and smartwatches, utilizing its built-in cables and USB ports.
- Multi-Protection Safety System: Integrated circuitry protects against over-heat, over-current, over-discharge, over-voltage, and short-circuits.
Figure 2.1: The IDMIX CH05 Portable Charger demonstrating its 3-in-1 functionality with AC plug, built-in MFi Lightning cable, and USB-C port. It also shows the LED light indicator.
Figure 2.2: The IDMIX CH05 Portable Charger, emphasizing its Apple MFi Certification for iPhone, iPad, and iPod compatibility, and recognition with a design award.
3. Safety Instructions
- Do not expose the power bank to extreme temperatures, direct sunlight, or fire.
- Avoid dropping, disassembling, or attempting to repair the device yourself.
- Keep the power bank away from water and other liquids.
- Do not use if the device is damaged or swollen.
- Store in a cool, dry place when not in use.
- Keep out of reach of children.
- Dispose of the product responsibly according to local regulations.
4. Setup
Before first use, fully charge your IDMIX CH05 Portable Charger.
- Unfold the built-in AC wall plug.
- Plug the power bank directly into a standard wall outlet.
- The LED indicators will illuminate to show the charging status. Allow the device to charge until all indicators are solid, indicating a full charge.
- Alternatively, you can charge the power bank via its USB-C input port using a compatible USB-C cable and power adapter (not included).
5. Operating Instructions
5.1 Charging the Power Bank
The power bank can be charged using its integrated AC wall plug or via the USB-C input port.
- Using AC Wall Plug: Extend the foldable AC prongs and plug the unit directly into a wall socket. The LED indicators will show charging progress.
- Using USB-C Input: Connect a USB-C cable to the power bank's USB-C input port and the other end to a USB-C power adapter.
Figure 5.1: The IDMIX CH05 Portable Charger being used as a wall charger, demonstrating its integrated AC plug and multiple charging options.
5.2 Charging External Devices
To begin charging an external device, press the power button once to activate the power bank. The LED indicators will show the remaining battery level.
- Using Built-in MFi Lightning Cable: Pull out the integrated Lightning cable and connect it to your iPhone, iPad, or other compatible Apple device.
- Using Built-in USB-C Cable: Pull out the integrated USB-C cable and connect it to your Android phone, tablet, or other compatible USB-C device.
- Using USB-A Output Port: Connect your device's USB-A charging cable to the USB-A output port on the power bank.
- Using USB-C Output Port: Connect your device's USB-C charging cable to the USB-C output port on the power bank.
The power bank supports charging multiple devices simultaneously using its various output options.
Figure 5.2: The IDMIX CH05 Portable Charger providing fast charging to a smartphone via its built-in cable.
Figure 5.3: The IDMIX CH05 Portable Charger demonstrating its ability to charge three devices concurrently using its various output ports and built-in cables.
5.3 LED Indicator Status
The LED indicators show the remaining battery capacity and charging status:
- Solid LEDs: Indicate remaining battery capacity.
- Flashing LEDs: Indicate the power bank is currently charging.
- No LEDs: The power bank is off or fully discharged. Press the power button once to check status.
To turn off the portable charger, press the power button twice.
6. Maintenance
- Clean the power bank with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Ensure the built-in cables and AC plug are properly folded and stored when not in use to prevent damage.
- For optimal battery life, fully charge the power bank at least once every three months if not used regularly.
7. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Power bank not charging. |
|
| Device not charging from power bank. |
|
| Slow charging. |
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | CH05 |
| Battery Capacity | 10000 mAh |
| Product Dimensions | 8.8 x 2.9 x 8.9 cm |
| Item Weight | 249 g |
| Input (AC Wall Plug) | Standard AC 100-240V |
| Input (USB-C Port) | 5V-3A (Max) / PD20W |
| Output (Built-in MFi Lightning Cable) | 5V-3A (Max) |
| Output (Built-in USB-C Cable) | 5V-3A (Max) / PD20W |
| Output (USB-A Port) | 5V-3A (Max) / 18W |
| Output (USB-C Port) | 5V-3A (Max) / PD20W |
| Certifications | MFi Licensed |
| Safety Features | Over-heat, Over-current, Over-discharge, Over-voltage, Short-circuit protection |
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact IDMIX customer service directly. Keep your purchase receipt for warranty claims.
