Introduction
This manual provides essential instructions for the proper use and maintenance of your PROTEAR 3.5mm Male AUX Audio Jack to USB 2.0 Charging Cable. This cable is specifically designed as a replacement charging cable for PROTEAR rechargeable headphones. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Safety Information
Observe the following safety precautions to prevent damage to the cable or connected devices, and to ensure user safety:
- Do not expose the cable to extreme temperatures, direct sunlight, or moisture.
- Avoid bending or twisting the cable excessively, as this can damage internal wires.
- Keep out of reach of children and pets.
- Use only with compatible PROTEAR rechargeable headphones as specified.
- Disconnect the cable by pulling the plug, not the cord.
Package Contents
Verify that all items are present in your package:
- 1 x PROTEAR 3.5mm Male AUX Audio Jack to USB 2.0 Charging Cable (Model: 80006)
Setup
The PROTEAR charging cable is designed for straightforward connection. Follow these steps to set up your cable for charging:
- Identify the Connectors: The cable has two distinct ends: a 3.5mm male AUX audio jack and a USB 2.0 Type-A male connector.
Image: The PROTEAR 3.5mm Male AUX to USB 2.0 Charging Cable, showing both the 3.5mm jack and the USB-A connector.
- Connect to Headphones: Insert the 3.5mm male AUX audio jack end of the cable into the corresponding charging port on your PROTEAR rechargeable headphones. This port is typically a small circular opening.
Image: A close-up view of the 3.5mm male AUX jack, which connects to the headphone's charging port.
- Connect to Power Source: Insert the USB 2.0 Type-A male connector into a compatible USB power source. This can be a USB wall adapter, a computer's USB port, or a power bank. Ensure the power source provides standard USB 5V output.
Image: A close-up view of the USB 2.0 Type-A male connector, ready to be plugged into a power source.
Operating
Once connected, the cable will facilitate charging of your PROTEAR rechargeable headphones. The charging process is typically indicated by an LED light on your headphones (refer to your headphone's manual for specific indicators).
- Ensure both ends of the cable are securely connected before initiating charging.
- Charging times may vary depending on the headphone model and the power source used.
- Disconnect the cable once the headphones are fully charged to preserve battery life.
Maintenance
Proper care will extend the life of your charging cable:
- Cleaning: Use a soft, dry cloth to wipe the cable and connectors. Do not use liquid cleaners or solvents.
- Storage: Store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage to the connectors. Discontinue use if damage is observed.
Troubleshooting
If you encounter issues with your charging cable, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones not charging. |
|
|
| Slow charging. |
|
|
Specifications
- Model Number: 80006
- Cable Length: Approximately 43 inches (108 cm)
- DC Head: 3.5mm
- Connector Type: USB 2.0 Type-A Male to 3.5mm Male AUX Audio Jack
- Compatibility: Specifically designed for PROTEAR Rechargeable Headphones
- Manufacturer: PROTEAR
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your PROTEAR rechargeable headphones or visit the official PROTEAR website. Keep your purchase receipt as proof of purchase.
For further assistance, you may contact PROTEAR customer service through their official channels.