Soundcore A3913

Download PDF
Contents

Soundcore Liberty 2 Wireless Earbuds User Manual

Brand: Soundcore | Model: A3913

Introduction

Welcome to your Soundcore Liberty 2 Wireless Earbuds. This manual provides detailed instructions on setup, operation, and maintenance to ensure you get the most out of your device. These earbuds feature diamond-inspired drivers for superior sound, HearID personalized audio, and a comfortable, secure fit with GripFit technology. They offer extended playtime and are designed to withstand daily use with IPX5 water resistance.

What's in the Box

  • Soundcore Liberty 2 Wireless Earphones
  • XS/S/M/L/XL/M+/L+ EarTips
  • S/M/L EarWings
  • USB-C Cable (60 cm)
  • Quick Start Guide
Soundcore Liberty 2 Earbuds and Charging Case

Image: Soundcore Liberty 2 Earbuds, charging case, and various ear tips and wings.

Setup

Fitting EarTips and EarWings

For optimal sound quality and a secure fit, it is crucial to select the correct size of EarTips and EarWings. Experiment with the various sizes provided to find the best combination for your ears. The EarWings are designed to fit snugly into the concha of your ear, providing stability.

Diagram showing different sizes of EarTips and EarWings

Image: A selection of different sized EarTips and EarWings for personalized fit.

To replace, gently remove the existing EarTip and EarWing. Align the new EarWing with the earbud's groove and press firmly until it clicks into place. Then, attach the EarTip by pushing it onto the nozzle.

First-time Pairing

1. Ensure the earbuds are fully charged and placed inside the charging case.

2. Open the charging case. The earbuds will automatically enter pairing mode, indicated by flashing white lights.

3. On your device, enable Bluetooth and select "Soundcore Liberty 2" from the list of available devices.

4. Once connected, you will hear an audible confirmation, and the lights on the earbuds will turn solid white.

Operating Your Earbuds

Basic Controls

The Liberty 2 earbuds feature physical buttons for control. Pressing the button on either earbud allows for various functions:

  • Power On/Off: Press and hold the button on either earbud for 1 second to power on, or 5 seconds to power off.
  • Play/Pause: Press the button on either earbud once.
  • Next Song: Double-press the button on the right earbud.
  • Previous Song: Double-press the button on the left earbud.
  • Answer/End Call: Press the button on either earbud once.
  • Reject Call: Press and hold the button on either earbud for 1 second.
  • Activate Voice Assistant: Press and hold the button on either earbud for 1 second (customizable via Soundcore App).

HearID Personalized Sound

HearID analyzes your unique hearing profile to create a custom sound signature tailored specifically for you. This ensures an optimized listening experience across various frequencies.

To use HearID:

1. Download the Soundcore App from your device's app store.

2. Connect your Liberty 2 earbuds to the app.

3. Follow the on-screen instructions to complete the HearID test. Ensure you are in a quiet environment for accurate results.

User interacting with HearID feature on Soundcore App

Image: A user taking the HearID test on the Soundcore mobile application.

Pairing with a New Device

To pair your Liberty 2 earbuds with a new device:

1. Place both earbuds into the charging case and leave the lid open.

2. Press and hold the button on the back of the charging case for 3 seconds until the white indicator lights on the earbuds flash quickly.

3. On your new device, enable Bluetooth and select "Soundcore Liberty 2" from the list of available devices.

Maintenance

Charging

The earbuds provide up to 8 hours of listening on a single charge. The charging case extends this to a total of 32 hours. For quick power, a 10-minute charge provides 2 hours of listening time.

Graphic illustrating 32-hour playtime and quick charge feature

Image: Visual representation of battery life and quick charging capabilities.

To charge the earbuds, place them in the charging case. To charge the case, connect it to a USB-C power source. The charging case also supports wireless charging.

Water Resistance

The Liberty 2 earbuds are rated IPX5 for water resistance, meaning they are protected against low-pressure water jets from any direction. This makes them suitable for workouts and light rain, but they are not designed for submersion in water.

Earbuds being splashed with water, demonstrating IPX5 rating

Image: Earbuds shown with water splashes, indicating their sweatproof and water-resistant design.

Troubleshooting

Resetting the Earbuds

If you experience connectivity problems or function issues, you can try resetting your earbuds:

1. Place both earbuds into the charging case and leave the lid open.

2. Press and hold the button on the back of the charging case for 10 seconds. The red lights on both earbuds will flash 3 times.

3. The earbuds will reset and restart with the default settings.

Specifications

FeatureValue
Model NameA3913
Connectivity TechnologyWireless
Wireless Communication TechnologyBluetooth
Bluetooth Version5.0
Playtime (Earbuds)Up to 8 hours
Playtime (with Charging Case)Up to 32 hours
Water Resistance RatingIPX5
Microphones4 (with Uplink Noise Cancellation)
Charging PortUSB-C
Wireless ChargingSupported
Item Weight3.52 ounces
Product Dimensions1.14 x 0.63 x 1.1 inches

Warranty and Support

Soundcore products come with a limited warranty. For detailed warranty information, technical support, or customer service inquiries, please visit the official Soundcore website or contact their customer support team directly. Keep your purchase receipt for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.