Instruction Manual: Washer Agitator Dogs Replacement

1. Product Overview

The UpStart Components 80040 Washer Agitator Dogs are replacement parts designed to restore the proper agitation function of your washing machine. These small, durable components are crucial for the agitator to effectively grip and move clothes during the wash cycle. Over time, original agitator dogs can wear down, leading to inefficient washing or a non-agitating machine. This package contains 40 pieces, providing ample replacements for multiple repairs or future needs.

2. Compatibility

These replacement agitator dogs are compatible with various washing machine models, including the Maytag MVWC300XW1. They are designed to replace original part numbers such as 80040, AP3119063, 285612, 285770, 3109, 3366877, 387091, 80040VP, AH388034, EA388034, ER80040, LP338, PS388034, and TJ90LP338. Always verify your washing machine's specific part requirements before installation.

3. Installation (Setup)

Replacing agitator dogs is a common repair that can be performed at home. Follow these steps carefully to ensure a safe and correct installation:

1. Safety First: Before beginning any work, ensure the washing machine is unplugged from the electrical outlet and the water supply is turned off.
2. Access the Agitator: Depending on your washing machine model, you may need to remove the agitator cap or fabric softener dispenser. This often involves prying it off or unscrewing it.
3. Remove the Agitator Bolt: Locate the bolt or screw at the bottom of the agitator. Use a socket wrench or screwdriver to loosen and remove it.
4. Remove the Agitator: Carefully pull the agitator straight up and out of the wash tub. It may require some force or wiggling.
5. Disassemble the Agitator (if necessary): Some agitators are two-piece units. If yours is, separate the upper and lower sections to expose the cam and agitator dogs.
6. Replace Agitator Dogs: Remove the old, worn agitator dogs from the cam. They typically slide out of slots. Insert the new UpStart Components agitator dogs into the same slots. Ensure they are seated correctly.
7. Reassemble Agitator: If you separated the agitator, reassemble the two sections, ensuring the new dogs engage properly.
8. Reinstall Agitator: Carefully lower the agitator back onto the transmission shaft in the wash tub. Align it properly and push down firmly until it seats.
9. Secure Agitator: Reinstall the agitator bolt/screw and tighten it securely. Do not overtighten.
10. Final Steps: Replace the agitator cap or fabric softener dispenser. Reconnect the washing machine to the electrical outlet and turn on the water supply.

4. Maintenance

Agitator dogs are wear-and-tear components. While no specific routine maintenance is required for the dogs themselves, regular inspection of your washing machine's agitator can help identify worn dogs before they cause significant issues. If you notice the agitator is not moving clothes effectively or is making unusual noises, it may be time to inspect and replace the agitator dogs.

5. Troubleshooting

If your washing machine is experiencing issues related to agitation, worn agitator dogs are a common cause. Consider the following:

• Agitator Not Moving Clothes: If the agitator spins freely by hand but does not move clothes during the wash cycle, the agitator dogs are likely worn and slipping.
• Weak Agitation: If agitation is weak or inconsistent, the dogs may be partially worn.
• Grinding or Clicking Noises: While less common, severely worn or broken agitator dogs can sometimes contribute to unusual noises during agitation.

If you encounter these symptoms, follow the installation steps to inspect and replace the agitator dogs.

6. Specifications

7. Warranty and Support

This product is a replacement part manufactured by UpStart Components. Any warranties for this product are offered solely by UpStart Components. For specific warranty details or support inquiries, please refer to the contact information provided with your purchase or visit the official UpStart Components website.