SEARS 35MM Universal Slide Magazine Tray Instruction Manual

1. Product Overview

The SEARS 35MM Universal Slide Magazine Tray is designed for organizing and projecting 35mm photographic slides. This tray features an automatic end-lock mechanism to securely hold up to 40 slides, ensuring smooth operation with compatible slide projectors.

It is engineered for compatibility with various projectors that utilize TDC-type plastic trays.

2. Compatibility

This slide magazine tray is compatible with projectors designed to use TDC-type plastic trays. Known compatible projector brands and models include:

• Sears Automatic
• AO Executive
• Anscomatic
• Bell & Howell
• Eastman
• TDC

Always verify your projector's manual for specific tray compatibility requirements.

3. Setup and Slide Loading

Follow these steps to properly load your 35mm slides into the tray:

1. Prepare Slides: Ensure your 35mm slides are clean and free of dust or fingerprints. Handle slides by their edges to avoid damaging the film.
2. Orient Slides: Determine the correct orientation for your slides. Typically, slides are inserted so that they appear correctly when projected. This usually means the image is upside down and reversed when viewed from the front of the slide. Consult your projector's manual for specific slide orientation requirements.
3. Insert Slides: Carefully insert each slide into an individual slot in the tray. The automatic end-lock mechanism will secure the slide in place. Do not force slides into slots.
4. Fill Tray: Continue loading slides until all 40 slots are filled, or until you have loaded all desired slides. Ensure each slide is fully seated in its slot.

Once loaded, the tray is ready for use with a compatible slide projector.

4. Operating with a Projector

To use the loaded slide tray with your projector:

1. Power Off Projector: Ensure your slide projector is turned off and unplugged before inserting or removing the slide tray.
2. Insert Tray: Align the slide tray with the projector's tray slot. Gently push the tray into the projector until it is fully seated. Refer to your projector's manual for precise insertion instructions.
3. Power On Projector: Plug in and turn on your projector.
4. Advance Slides: Use the projector's controls to advance through the slides. The automatic end-lock mechanism of the tray will facilitate smooth slide changes.
5. Remove Tray: After your presentation, turn off and unplug the projector. Carefully remove the slide tray from the projector.

5. Maintenance and Storage

Proper maintenance ensures the longevity and optimal performance of your slide tray:

• Cleaning: Periodically clean the tray with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents, as these can damage the plastic.
• Dust Removal: Use a can of compressed air to remove dust from the slide slots.
• Storage: Store the slide tray in a cool, dry place away from direct sunlight and extreme temperatures. If storing slides in the tray for extended periods, consider using a protective cover or box to prevent dust accumulation.
• Inspection: Before each use, inspect the tray for any cracks, damage, or debris that could interfere with slide loading or projector operation.

6. Troubleshooting

If you encounter issues with your slide tray, consider the following:

• Slides Not Advancing:
  • Ensure slides are correctly seated in their slots and not jammed.
  • Verify the tray is fully inserted into the projector.
  • Check your projector's mechanism for any obstructions or malfunctions.
• Slides Falling Out:
  • Confirm slides are properly oriented and fully engaged with the automatic end-lock mechanism.
  • Inspect the tray slots for damage that might prevent slides from being held securely.
• Tray Not Inserting into Projector:
  • Ensure the tray is aligned correctly with the projector's slot.
  • Verify that the tray is compatible with your specific projector model (refer to Section 2).
  • Check for any foreign objects obstructing the projector's tray mechanism.

If problems persist, consult your projector's instruction manual or contact the projector manufacturer for support.

7. Specifications

8. Product Image

9. Warranty and Support

Information regarding specific warranty terms for the SEARS 35MM Universal Slide Magazine Tray is not provided in this manual. For warranty details or technical support, please refer to the original product packaging or contact the retailer from whom the product was purchased.