1. Introduction
This manual provides comprehensive instructions for the safe and effective installation, operation, and maintenance of your Barkan TV Ceiling Mount. This full-motion ceiling mount is designed for 29-65 inch flat or curved screens, supporting up to 88 lbs (40 kg). It features telescopic height adjustment and a patented mechanism for compatibility with various TV backscreen types.
Image: The Barkan TV Ceiling Mount installed, demonstrating its telescopic height adjustment and multi-directional movement for optimal viewing.
2. Safety Information
Please read all safety warnings and instructions carefully before installation and use. Failure to follow these instructions may result in property damage, serious injury, or death.
- Child Safety: Ensure the TV is securely mounted to prevent tip-over accidents. All Barkan TV mounts include a Fall Proof system to prevent screen disengagement.
- Weight Capacity: Do not exceed the maximum load capacity of 88 lbs (40 kg). Overloading can cause instability and potential failure.
- Ceiling Type: Verify your ceiling type is compatible with the mount. This mount is suitable for drywall ceilings with wood studs and concrete ceilings. It is NOT suitable for drywall/gypsum/plaster ceilings without wood studs.
- Professional Installation: If you are unsure about the installation process or ceiling integrity, consult a qualified professional.
- Tools: Use appropriate tools and wear safety glasses during installation.
- Periodic Checks: Regularly check all screws and connections to ensure they remain tight and secure.
For detailed safety information, refer to the official Safety Information PDF: Safety Information (PDF)
3. Product Features
- Telescopic Height Adjustment: The mount offers a telescopic height adjustment range from 16.1 inches (41 cm) to 38 inches (97 cm) from the ceiling, accommodating various room heights and viewing preferences.
- Full Motion Capability: Enjoy optimal viewing angles with a 160° swivel near the screen connection plate and a tool-free tilt range from 0° to 25°. The mount also allows for ±5° leveling.
- Patented Design for Versatility: This mount features a patented ball and socket mechanism, allowing the four adapters to move in two dimensions. This design ensures a firm fit for both flat and curved TVs, as well as TVs with unique back structures (bumps, indentations, or non-standard connection-hole patterns), eliminating the need for spacers.
- Wide Compatibility: Designed to fit most 29-65 inch TVs weighing up to 88 lbs (40 kg). It supports VESA mounting patterns including 200x100, 200x200, 300x300, 300x400, 400x200, 400x300, 400x400 mm, and non-VESA patterns up to 400x400 mm.
- Integrated Cable Management: The hollow pole design allows for discreet routing of cables, maintaining a clean and organized appearance.
- Fall Proof System: Includes a safety mechanism to prevent accidental disengagement of the TV from the mount.
Image: Visual representation of the mount's adjustable features: height from 16.1" to 38", tilt 0°-20°, swivel 160°, and ±5° leveling, with a maximum load of 88 lbs.
Image: An overview of the mount's advanced features, including its patented mechanism, cable management, child safety features, and rigorous safety testing.
4. Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 16.89 x 7.09 x 2.95 inches |
| Item Weight | 8.02 pounds (3.64 kg) |
| Model Number | 3500.B |
| Mounting Type | Ceiling Mount |
| Movement Type | Articulating (Full Motion) |
| Brand | Barkan |
| Material | Iron |
| Color | Black |
| Compatible Devices | Television (29-65 inches) |
| Maximum Tilt Angle | 25 Degrees |
| VESA Compatibility | 200x100, 200x200, 300x300, 300x400, 400x200, 400x300, 400x400 mm (and non-VESA up to 400x400 mm) |
| Height Adjustment Range | 16.1" - 38" (41 - 97 cm) |
| UPC | 818212003418 |
Image: A visual breakdown of the mount's specifications, including its physical dimensions, adjustable height levels, and VESA mounting patterns.
5. What's in the Box
The Barkan TV Ceiling Mount package includes the following components:
- Barkan TV Ceiling Mount Assembly
- Mounting Hardware Kit (including various screws, anchors, washers, and spacers for wall and TV mounting)
- HDMI Cable
- Installation Manual
- Safety Information Document
Image: An illustration of the comprehensive hardware kit provided with the mount, detailing various screws and anchors for secure installation.
6. Setup and Installation
6.1. Before You Begin
Before starting the installation, ensure you have the necessary tools and verify your ceiling type:
- Ceiling Compatibility: This mount is compatible with drywall ceilings with wood studs and concrete ceilings. It is NOT compatible with drywall/gypsum/plaster ceilings without wood studs.
- Required Tools:
- Drill (1/4" - 6mm, 3/8" - 10mm bits for concrete/wood)
- Safety Glasses
- Stud Finder (for drywall with wood studs)
- Pencil
- Measuring Tape
- Level
Image: An overview of compatible ceiling types and the essential tools required for a safe and successful installation.
6.2. Installation Steps (Simplified)
The assembly process is designed to be straightforward. Follow these general steps:
- Attach Adapters to TV: Connect the TV plate adapters to the rear side of your television using the provided screws that match your TV's VESA pattern.
- Install Bracket on Ceiling: Securely install the ceiling bracket to your chosen ceiling location, ensuring it is aligned with a wood stud (for drywall) or using appropriate anchors (for concrete).
- Snap TV onto Bracket: Carefully lift the TV and snap it onto the installed ceiling bracket. Ensure the Fall Proof system engages correctly.
Image: A visual guide to the three main steps of assembling and installing the Barkan TV Ceiling Mount.
For detailed, step-by-step installation instructions, including specific measurements and hardware usage, please refer to the official Installation Manual: Installation Manual (PDF)
7. Operating Instructions
Once installed, your Barkan TV Ceiling Mount allows for flexible positioning of your television to achieve the optimal viewing experience.
- Height Adjustment: To adjust the telescopic height, loosen the locking mechanisms on the pole, slide the TV to the desired height, and then securely tighten the mechanisms.
- Swivel: Gently push or pull the TV to swivel it up to 160° horizontally. This allows for viewing from various positions within the room.
- Tilt: The mount allows for a tool-free tilt adjustment from 0° to 25°. Simply push the top or bottom of the TV to achieve the desired vertical angle, reducing glare or optimizing viewing from different heights.
- Leveling: Fine-tune the horizontal level of your TV by adjusting the leveling mechanism, ensuring a perfectly straight display.
Image: This diagram illustrates how to utilize the mount's full motion features, including height, tilt, and swivel, to achieve your preferred viewing angle.
8. Maintenance
To ensure the longevity and safe operation of your Barkan TV Ceiling Mount, periodic maintenance is recommended:
- Check Connections: Periodically inspect all screws and bolts to ensure they remain tight. Over time, vibrations or adjustments may cause them to loosen.
- Cleaning: Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
- Moving Parts: If any moving parts (swivel, tilt) become stiff, a small amount of silicone-based lubricant can be applied, but avoid over-lubrication.
- Damage Inspection: Regularly check for any signs of wear, damage, or corrosion. If any issues are found, contact Barkan customer support immediately.
9. Troubleshooting
If you encounter any issues with your Barkan TV Ceiling Mount, refer to the following common troubleshooting tips:
- TV Not Level:
- Ensure the ceiling bracket is installed perfectly level.
- Adjust the mount's leveling mechanism as described in the operating instructions.
- Mount Feels Loose/Wobbly:
- Re-check all mounting screws and bolts, ensuring they are tightened securely.
- Verify that the ceiling structure (wood studs or concrete) is sound and capable of supporting the weight.
- Ensure the TV is properly seated and locked into the Fall Proof system.
- Difficulty Adjusting Movement (Tilt/Swivel):
- Check for any obstructions.
- Ensure no cables are caught in the moving parts.
- If stiff, apply a small amount of silicone lubricant to the pivot points.
- Cables Not Fitting Through Pole:
- The internal diameter of the pole is designed for standard cables. If cables are too thick or connectors are too large, consider external cable management solutions or consult Barkan support.
If the issue persists, please contact Barkan customer support for further assistance.
10. Warranty and Support
Lifetime Limited Warranty: Barkan Mounts provides a Lifetime Limited Warranty for this product, reflecting their commitment to quality and durability. For specific terms and conditions of the warranty, please refer to the documentation included with your product or visit the Barkan website.
Customer Support: Barkan's customer service experts are available to assist you with any questions or concerns regarding your TV mount. You can find more information, FAQs, and helpful tools on their official website.
Visit the Barkan Store on Amazon: Barkan Mounts Store
For direct support, you may also visit the Barkan website for contact information: www.barkanmounts.com/support
