1. Introduction
This manual provides essential instructions for the proper use and care of your Tzumi Phone Grip & Stand, Model 6117. This accessory is designed to enhance your mobile device experience by providing a secure grip and a convenient stand function.
2. Safety Information
- Keep out of reach of small children to prevent choking hazards.
- Do not attempt to modify or disassemble the product.
- Avoid exposing the product to extreme temperatures or direct sunlight for extended periods.
- Ensure the adhesive is applied to a clean, dry, and flat surface for optimal adhesion.
3. Product Overview
The Tzumi Phone Grip & Stand is a versatile accessory that attaches to the back of your smartphone or tablet. It features a collapsible design that allows it to function as a secure grip for one-handed use and a convenient stand for hands-free viewing.
Image 1: The Tzumi Phone Grip & Stand, featuring a decorative unicorn design. This accessory provides a secure hold and functions as a kickstand for mobile devices.
Components:
- Adhesive Base: The flat surface that adheres to your device.
- Collapsible Mechanism: The expandable part that forms the grip and stand.
- Top Disc: The decorative or functional top surface of the grip.
4. Setup and Installation
- Clean the Surface: Ensure the back of your phone or phone case is clean, dry, and free of dust, oils, or residue. Use an alcohol wipe if necessary and allow it to dry completely.
- Peel the Adhesive: Carefully peel off the protective film from the adhesive base of the Tzumi Phone Grip & Stand.
- Position the Grip: Place the grip in your desired location on the back of your device. Consider where it feels most comfortable for holding and where it will best function as a stand.
- Apply Pressure: Once positioned, press firmly on the grip for at least 30 seconds to ensure strong adhesion. For best results, allow the adhesive to cure for a few hours before heavy use.
Note: The adhesive is generally designed for a single application. Repositioning may reduce its effectiveness.
5. Operating Instructions
Using as a Grip:
To use the accessory as a grip, simply pull the top disc outwards until it fully extends. Slide your fingers between your device and the extended grip for a more secure and comfortable hold, especially when using larger phones or taking selfies.
Using as a Stand:
To use the accessory as a stand, extend the grip fully. You can then prop your device horizontally or vertically on a flat surface. Adjust the angle by slightly collapsing the grip until the desired viewing angle is achieved.
Collapsing the Grip:
When not in use, gently push the top disc back towards the adhesive base until it lies flat against your device. This makes the grip compact and easy to store in pockets or bags.
6. Maintenance
- Cleaning: Wipe the surface of the grip with a soft, damp cloth if it becomes dirty. Avoid harsh chemicals or abrasive cleaners.
- Adhesive Care: If the adhesive loses its stickiness due to dust, you may gently rinse it with water and let it air dry. Do not wipe it with a cloth, as this can leave fibers. This may temporarily restore some stickiness, but repeated cleaning is not recommended.
- Storage: Store the grip in its collapsed position when not in use to protect the mechanism.
7. Troubleshooting
| Problem | Solution |
|---|---|
| Grip is not sticking to the phone. | Ensure the phone surface is clean and dry before application. Avoid textured or silicone cases, as the adhesive may not bond effectively. |
| Grip feels loose after some time. | The adhesive may have collected dust. Gently rinse the adhesive with water and let it air dry completely. If the issue persists, the adhesive may have worn out. |
| Grip mechanism is stiff or difficult to collapse. | Ensure no debris is lodged in the collapsible mechanism. Gently work the mechanism to loosen it. Do not force it. |
8. Specifications
- Model: 6117
- Product Dimensions: 1 x 1 x 1 inches (Approximate, when collapsed)
- Material: Silicone
- Grip Type: Pop Grip
- Special Feature: Adjustable
- Brand: Tzumi
9. Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Tzumi website. Keep your proof of purchase for warranty claims.
Website: www.tzumi.com (Example link, actual link may vary)
Email: support@tzumi.com (Example email, actual email may vary)
