Fila 38-188-002
FILA Filactive Unisex XL Digital Watch 38-188-002 User Manual
Model: 38-188-002 | Brand: Fila
1. Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your FILA Filactive Unisex XL Digital Watch, model 38-188-002. Please read this manual carefully to ensure proper use and to maximize the lifespan of your watch.
Figure 1: Front view of the FILA Filactive Unisex XL Digital Watch.
2. Initial Setup
2.1. Battery Installation
Your FILA Filactive Digital Watch comes with a pre-installed LR44 battery. If the display is dim or unresponsive, the battery may need replacement. It is recommended to have battery replacement performed by a qualified watch technician to ensure water resistance integrity.
2.2. Time and Date Setting
To set the time and date:
- Press the MODE button repeatedly until the time setting mode is displayed (usually indicated by flashing digits).
- Use the RESET button to select the digit or setting you wish to adjust (e.g., hours, minutes, year, month, day).
- Use the ST/STP button to increase the value of the selected digit.
- Once all settings are correct, press the MODE button again to exit the setting mode and return to the normal time display.
3. Operating Instructions
Your watch features several functions accessible via the side buttons:
- MODE Button: Cycles through different modes (Time, Alarm, Stopwatch).
- RESET Button: Used for resetting values or selecting options within a mode.
- ST/STP Button: Starts/stops functions (e.g., stopwatch) or adjusts values.
- LIGHT Button: Activates the backlight for illumination in low-light conditions.
3.1. Time Display
The default mode displays the current time (hours, minutes, seconds) and date (day of week, month, day).
3.2. Alarm and Hourly Chime
To set the alarm:
- Press MODE until the alarm setting mode appears.
- Use RESET to select hours or minutes.
- Use ST/STP to adjust the alarm time.
- Press MODE to confirm and exit.
To activate/deactivate the alarm or hourly chime, press RESET while in the alarm display mode (without flashing digits).
3.3. Stopwatch (Chrono)
To use the stopwatch function:
- Press MODE until the stopwatch display appears (usually 00:00:00).
- Press ST/STP to start the stopwatch.
- Press ST/STP again to pause the stopwatch.
- Press RESET to reset the stopwatch to zero.
- Press MODE to return to the time display.
3.4. Backlight
Press the LIGHT button to illuminate the display for a few seconds, making it visible in dark environments.
3.5. Water Resistance
This watch is rated for 10 ATM (100 meters) water resistance. This means it is suitable for swimming, showering, and snorkeling. Do not operate buttons underwater as this can compromise the water seal. Avoid exposing the watch to hot water or steam, which can damage the seals.
Figure 2: The FILA Filactive Digital Watch worn on a wrist.
4. Maintenance
4.1. Cleaning
Wipe the watch case and strap regularly with a soft, damp cloth. For silicone straps, mild soap and water can be used. Ensure the watch is completely dry before wearing.
4.2. Storage
Store your watch in a cool, dry place away from direct sunlight and extreme temperatures. Avoid exposing it to strong magnetic fields.
4.3. Battery Replacement
When the battery needs replacement, it is highly recommended to take your watch to an authorized service center or a professional watch repair shop. This ensures that the watch's water resistance is maintained after the battery compartment is opened and resealed.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or dead battery. | Replace the battery (refer to Section 4.3). |
| Buttons are unresponsive. | Watch may be in a locked mode or internal malfunction. | Try pressing all buttons firmly. If issue persists, consult a professional. |
| Water inside the watch. | Seals compromised, possibly due to button operation underwater or exposure to extreme temperatures. | Immediately take the watch to a professional service center to prevent further damage. |
| Time is inaccurate. | Incorrect time setting or low battery. | Reset the time (refer to Section 2.2). If problem persists, replace battery. |
6. Specifications
| Model Number | 38-188-002 |
| Product Dimensions (LxWxH) | 6.14 x 3.94 x 3.07 cm |
| Item Weight | 10 g |
| Case Diameter | 50 Millimetres |
| Case Thickness | 15 Millimetres |
| Band Material Type | Silicone |
| Band Colour | Red |
| Watch Movement Type | Automatic (Note: This is a digital watch, but the provided specification lists 'Automatic' movement type.) |
| Water Resistance Depth | 10 ATM (100 Meters) |
| Battery Type | 1 x LR44 (included) |
| Crystal Type | Mineral Crystal Glass |
7. Warranty Information
Specific warranty terms and conditions for your FILA Filactive Digital Watch are provided by the manufacturer or the retailer at the time of purchase. Please refer to any warranty cards or documentation included with your product, or contact your point of purchase for detailed warranty information.
8. Customer Support
For technical assistance, service, or inquiries not covered in this manual, please contact the retailer from whom you purchased the watch or visit the official Fila website for support contact details. When contacting support, please have your watch model number (38-188-002) and purchase information readily available.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.